Time formatting reference (Earth/Kerbin) is now based on the in-game setting. Removed the TimeFormatter readout as it's not required anymore.
Time formatting reference (Earth/Kerbin) is now based on the in-game setting. Removed the TimeFormatter readout as it's not required anymore.

--- a/Documents/CHANGES.txt
+++ b/Documents/CHANGES.txt
@@ -1,24 +1,56 @@
+1.0.19.0
+    Added: Added current vessel name readout. (antplant)
+    Added: 'Relative Radial Velocity' and 'Time To Rendezvous' readouts. (itwtx)
+    Added: Readout help strings. (harryyoung)
+    Changed: The 'Torque' value in the editor is now precise to two decimal places.
+    Changed: Time formatting reference (Kerbin/Earth) is now based on the in-game setting.
+    Fixed: Optimised time formatting. (itwtx)
+    Fixed: TimeToAtmosphere checks that the Apoapsis is outside atmosphere. (Kerbas-ad-astra)
+    Fixed: Issue with stage priority flow. Caused Rapier calculations to fail if LF and O are drawn from different tanks. (Padishar)
+    Removed: Time Formatter readout as it's not required anymore.
+
+1.0.18.0
+    Added: Orbital readouts - "Speed at Periapsis" and "Speed at Apoapsis". (Padishar)
+    Added: Manoeuvre readouts - "Post-burn Apoapsis" and "Post-burn Periapsis". (Padishar)
+    Added: Orbital readout - "Time to Atmosphere".
+    Fixed: Synched the minimum simulation time sliders and stopped them from snapping back after 999ms. (saybur)
+    Fixed: Added workaround for the bug in Vessel.horizontalSrfSpeed (Padishar)
+    Fixed: Physically insignificant part mass was not being correctly cascaded down through multiple parent parts.
+    Fixed: Intake air demand calculation not working.
+    Fixed: Some build engineer settings labels do not scale with UI size.
+
 1.0.17.0
     Added: 'Mach Number' readout under the 'Surface' category and included it on the default surface HUD.
+    Added: Stock sections in the Flight Engineer can now become HUDs.
     Added 'Thermal' readouts category including:
         Internal Flux
         Convection Flux
         Radiation Flux
         Critical Part Name
         Critical Part Temperature
-        Critical Part Percentage of Max Temperature
+        Critical Part Skin Temperature
+        Critical Part Thermal Percentage of Max Temperature
         Hottest Part Name
         Hottest Part Temperature
+        Hottest Part Skin Temperature
         Coldest Part Name
         Coldest Part Temperature
+        Coldest Part Skin Temperature
 
     Changed: Mach on the Build Engineer now accurate to 2 decimal places.
     Changed: Max mach in the Build Engineer defaults to 1.00 even when no jet engines are present.
-    Changed: Increased eccentricity readout to 5 decimal places.  
-    Changed: Implemented Sarbian's object pooling. 
+    Changed: Increased eccentricity readout to 5 decimal places.
+    Changed: Implemented Sarbian's object pooling.
+    Changed: The default selected body is now assigned via 'Planitarium.Home'.
+    Changed: HUDs to clamp fully inside the screen instead of allowing them to run off the edge by a certain amount.
     Fixed: Physically insignificant part mass is now associated with the parent part.
     Fixed: Longitude and Latitude readouts now use a KER formatter instead of Squad's incorrect implementation.
     Fixed: Possible null reference in the Rendezvous Processor.
+    Fixed: Fairing mass issues introduced with regards to simulation changes.
+    Fixed: Use of per-propellant fuel flow mode override.
+    Fixed: Burn times calculated for jet engines.
+    Fixed: Thrust issues introduced with Sarbian's simulation alterations.
+    Fixed: Issue where HUDs positioned close to the top/bottom of the screen could be pushed out of position.
 
 1.0.16.6, 02-05-15
     Fixed: Separately staged fairing mass jettisons are now calculated in the editor.
@@ -62,7 +94,7 @@
 
 1.0.15.1, 13-02-2015
     Rebuild
-    
+
 1.0.15.0, 08-02-2015
     Padishar's Fixes:
         Added: Support KIDS ISP thrust correction.
@@ -72,7 +104,7 @@
 
 1.0.14.1, 28-12-2014
     Fixed: Missing texture on the ER-7500 model.
-    
+
 1.0.14.0, 28-12-2014
     Added: Career mode that limits the Flight Engineer by:
         - Requiring an Engineer Kerbal of any level, or placement of an Engineer Chip or ER-7500 part.
@@ -192,7 +224,7 @@
     Added: New readout to the surface category:
         - Vertical Acceleration
         - Horizontal Acceleration
-    
+
     Changed: Atmospheric efficiency readout now shows as a percentage.
     Changed: Atmospheric settings (pressure/velocity) in the editor condensed onto a single line.
     Fixed: Bug where the overlays in the editor would stay open outside of parts screen.
@@ -349,6 +381,7 @@
     Added: Stock toolbar support in the Flight Engineer.
     Changed: Orbital Period has higher precision.
     Fixed: Various NullRefs in editor window and overlay.
-    
+
 1.0.0.0, 24-07-2014
     Initial release for public testing.
+

--- a/KerbalEngineer/Control/ControlCentre.cs
+++ b/KerbalEngineer/Control/ControlCentre.cs
@@ -142,7 +142,7 @@
             try
             {
                 GUI.skin = null;
-                this.position = GUILayout.Window(this.GetInstanceID(), this.position, this.Window, "KERBAL ENGINEER REDUX " + EngineerGlobals.AssemblyVersion + " - CONTROL CENTRE", HighLogic.Skin.window);
+                this.position = GUILayout.Window(this.GetInstanceID(), this.position, this.Window, "KERBAL ENGINEER REDUX " + EngineerGlobals.ASSEMBLY_VERSION + " - CONTROL CENTRE", HighLogic.Skin.window);
                 this.CentreWindow();
             }
             catch (Exception ex)

--- a/KerbalEngineer/Editor/BuildAdvanced.cs
+++ b/KerbalEngineer/Editor/BuildAdvanced.cs
@@ -215,7 +215,7 @@
                 }
 
                 // Change the window title based on whether in compact mode or not.
-                title = !compactMode ? "KERBAL ENGINEER REDUX " + EngineerGlobals.AssemblyVersion : "K.E.R. " + EngineerGlobals.AssemblyVersion;
+                title = !compactMode ? "KERBAL ENGINEER REDUX " + EngineerGlobals.ASSEMBLY_VERSION : "K.E.R. " + EngineerGlobals.ASSEMBLY_VERSION;
 
                 // Reset the window size when the staging or something else has changed.
                 stagesLength = stages.Length;
@@ -523,12 +523,12 @@
             GUILayout.EndHorizontal();
 
             GUILayout.BeginHorizontal();
-            GUILayout.Label("Simulate using vectored thrust values:");
+            GUILayout.Label("Simulate using vectored thrust values:", settingStyle);
             SimManager.vectoredThrust = GUILayout.Toggle(SimManager.vectoredThrust, "ENABLED", buttonStyle, GUILayout.Width(100.0f * GuiDisplaySize.Offset));
             GUILayout.EndHorizontal();
 
             GUILayout.BeginHorizontal();
-            GUILayout.Label("Verbose Simulation Log:");
+            GUILayout.Label("Verbose Simulation Log:", settingStyle);
             SimManager.logOutput = GUILayout.Toggle(SimManager.logOutput, "ENABLED", buttonStyle, GUILayout.Width(100.0f * GuiDisplaySize.Offset));
             GUILayout.EndHorizontal();
 
@@ -563,9 +563,9 @@
             }
             GUILayout.EndHorizontal();
 
-            GUILayout.Label("Minimum delay between simulations: " + SimManager.minSimTime.Milliseconds + "ms", settingStyle);
+            GUILayout.Label("Minimum delay between simulations: " + SimManager.minSimTime.TotalMilliseconds + "ms", settingStyle);
             GUI.skin = HighLogic.Skin;
-            SimManager.minSimTime = new TimeSpan(0, 0, 0, 0, (int)GUILayout.HorizontalSlider(SimManager.minSimTime.Milliseconds, 0, 2000.0f));
+            SimManager.minSimTime = TimeSpan.FromMilliseconds(GUILayout.HorizontalSlider((float)SimManager.minSimTime.TotalMilliseconds, 0, 2000.0f));
             GUI.skin = null;
         }
 

--- a/KerbalEngineer/EngineerGlobals.cs
+++ b/KerbalEngineer/EngineerGlobals.cs
@@ -1,7 +1,5 @@
 // 
-//     Kerbal Engineer Redux
-// 
-//     Copyright (C) 2014 CYBUTEK
+//     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
 //     it under the terms of the GNU General Public License as published by
@@ -17,42 +15,31 @@
 //     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // 
 
-#region Using Directives
-
-using System.IO;
-using System.Reflection;
-
-#endregion
-
 namespace KerbalEngineer
 {
-    public class EngineerGlobals
+    using System.IO;
+    using System.Reflection;
+
+    public static class EngineerGlobals
     {
-        #region Constants
-
         /// <summary>
         ///     Current version of the Kerbal Engineer assembly.
         /// </summary>
-        public const string AssemblyVersion = "1.0.16.6";
-
-        #endregion
-
-        #region Fields
+        public const string ASSEMBLY_VERSION = "1.0.18.1";
 
         private static string assemblyFile;
         private static string assemblyName;
         private static string assemblyPath;
-
-        #endregion
-
-        #region Properties
 
         /// <summary>
         ///     Gets the Kerbal Engineer assembly's path including the file name.
         /// </summary>
         public static string AssemblyFile
         {
-            get { return assemblyFile ?? (assemblyFile = Assembly.GetExecutingAssembly().Location); }
+            get
+            {
+                return assemblyFile ?? (assemblyFile = Assembly.GetExecutingAssembly().Location);
+            }
         }
 
         /// <summary>
@@ -60,7 +47,10 @@
         /// </summary>
         public static string AssemblyName
         {
-            get { return assemblyName ?? (assemblyName = new FileInfo(AssemblyFile).Name); }
+            get
+            {
+                return assemblyName ?? (assemblyName = new FileInfo(AssemblyFile).Name);
+            }
         }
 
         /// <summary>
@@ -68,9 +58,10 @@
         /// </summary>
         public static string AssemblyPath
         {
-            get { return assemblyPath ?? (assemblyPath = AssemblyFile.Replace(new FileInfo(AssemblyFile).Name, "")); }
+            get
+            {
+                return assemblyPath ?? (assemblyPath = AssemblyFile.Replace(new FileInfo(AssemblyFile).Name, ""));
+            }
         }
-
-        #endregion
     }
 }

--- a/KerbalEngineer/Extensions/PartExtensions.cs
+++ b/KerbalEngineer/Extensions/PartExtensions.cs
@@ -197,10 +197,10 @@
             return GetModule<ModuleEngines>(part);
         }
 
-        public static ModuleEnginesFX GetModuleEnginesFx(this Part part)
+/*        public static ModuleEnginesFX GetModuleEnginesFx(this Part part)
         {
             return GetModule<ModuleEnginesFX>(part);
-        }
+        }*/
 
         /// <summary>
         ///     Gets a ModuleGenerator typed PartModule.
@@ -221,19 +221,19 @@
         /// <summary>
         ///     Gets the current selected ModuleEnginesFX.
         /// </summary>
-        public static ModuleEnginesFX GetModuleMultiModeEngine(this Part part)
-        {
-            ModuleEnginesFX moduleEngineFx;
+        public static ModuleEngines GetModuleMultiModeEngine(this Part part)
+        {
+            ModuleEngines moduleEngines;
             MultiModeEngine multiMod = GetModule<MultiModeEngine>(part);
             if (multiMod != null)
             {
                 string mode = multiMod.mode;
                 for (int i = 0; i < part.Modules.Count; ++i)
                 {
-                    moduleEngineFx = part.Modules[i] as ModuleEnginesFX;
-                    if (moduleEngineFx != null && moduleEngineFx.engineID == mode)
+                    moduleEngines = part.Modules[i] as ModuleEngines;
+                    if (moduleEngines != null && moduleEngines.engineID == mode)
                     {
-                        return moduleEngineFx;
+                        return moduleEngines;
                     }
                 }
             }
@@ -466,7 +466,7 @@
         /// </summary>
         public static bool IsEngine(this Part part)
         {
-            return HasModule<ModuleEngines>(part) || HasModule<ModuleEnginesFX>(part);
+            return HasModule<ModuleEngines>(part);
         }
 
         /// <summary>
@@ -549,7 +549,7 @@
         /// </summary>
         public static bool IsSolidRocket(this Part part)
         {
-            return (part.HasModule<ModuleEngines>() && part.GetModuleEngines().throttleLocked) || (part.HasModule<ModuleEnginesFX>() && part.GetModuleEnginesFx().throttleLocked);
+            return (part.HasModule<ModuleEngines>() && part.GetModuleEngines().throttleLocked);
         }
 
         public class ProtoModuleDecoupler

--- a/KerbalEngineer/Flight/DisplayStack.cs
+++ b/KerbalEngineer/Flight/DisplayStack.cs
@@ -214,7 +214,7 @@
         /// </summary>
         private void DrawControlBar()
         {
-            GUILayout.Label("FLIGHT ENGINEER " + EngineerGlobals.AssemblyVersion, this.titleStyle);
+            GUILayout.Label("FLIGHT ENGINEER " + EngineerGlobals.ASSEMBLY_VERSION, this.titleStyle);
 
             this.DrawControlBarButtons(SectionLibrary.StockSections);
             this.DrawControlBarButtons(SectionLibrary.CustomSections);

--- a/KerbalEngineer/Flight/Readouts/Miscellaneous/Separator.cs
+++ b/KerbalEngineer/Flight/Readouts/Miscellaneous/Separator.cs
@@ -45,7 +45,7 @@
         {
             this.Name = "Separator";
             this.Category = ReadoutCategory.GetCategory("Miscellaneous");
-            this.HelpString = String.Empty;
+            this.HelpString = "Creats a line to help seperate subsections in a module.";
             this.IsDefault = false;
             this.Cloneable = true;
 

--- a/KerbalEngineer/Flight/Readouts/Miscellaneous/SimulationDelay.cs
+++ b/KerbalEngineer/Flight/Readouts/Miscellaneous/SimulationDelay.cs
@@ -51,7 +51,7 @@
             GUILayout.BeginHorizontal();
             GUILayout.Label("Sim Delay", this.NameStyle);
             GUI.skin = HighLogic.Skin;
-            SimManager.minSimTime = new TimeSpan(0, 0, 0, 0, (int)GUILayout.HorizontalSlider(SimManager.minSimTime.Milliseconds, 0, 1000.0f));
+            SimManager.minSimTime = TimeSpan.FromMilliseconds(GUILayout.HorizontalSlider((float)SimManager.minSimTime.TotalMilliseconds, 0, 2000.0f));
             GUI.skin = null;
             GUILayout.EndHorizontal();
         }

--- a/KerbalEngineer/Flight/Readouts/Miscellaneous/SystemTime.cs
+++ b/KerbalEngineer/Flight/Readouts/Miscellaneous/SystemTime.cs
@@ -40,7 +40,7 @@
         {
             this.Name = "System Time";
             this.Category = ReadoutCategory.GetCategory("Miscellaneous");
-            this.HelpString = String.Empty;
+            this.HelpString = "Shows the System Time in 12 hour format (AM/PM)";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Miscellaneous/TimeReference.cs
+++ /dev/null
@@ -1,66 +1,1 @@
-// 
-//     Kerbal Engineer Redux
-// 
-//     Copyright (C) 2014 CYBUTEK
-// 
-//     This program is free software: you can redistribute it and/or modify
-//     it under the terms of the GNU General Public License as published by
-//     the Free Software Foundation, either version 3 of the License, or
-//     (at your option) any later version.
-// 
-//     This program is distributed in the hope that it will be useful,
-//     but WITHOUT ANY WARRANTY; without even the implied warranty of
-//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-//     GNU General Public License for more details.
-// 
-//     You should have received a copy of the GNU General Public License
-//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
-// 
 
-#region Using Directives
-
-using System;
-
-using KerbalEngineer.Flight.Sections;
-using KerbalEngineer.Helpers;
-
-using UnityEngine;
-
-#endregion
-
-namespace KerbalEngineer.Flight.Readouts.Miscellaneous
-{
-    public class TimeReference : ReadoutModule
-    {
-        #region Constructors
-
-        public TimeReference()
-        {
-            this.Name = "Time Reference Adjuster";
-            this.Category = ReadoutCategory.GetCategory("Miscellaneous");
-            this.HelpString = String.Empty;
-            this.IsDefault = false;
-        }
-
-        #endregion
-
-        #region Methods: public
-
-        public override void Draw(SectionModule section)
-        {
-            GUILayout.BeginHorizontal();
-            GUILayout.Label("Time Ref.: " + TimeFormatter.Reference, this.NameStyle);
-            if (GUILayout.Button("Earth", this.ButtonStyle))
-            {
-                TimeFormatter.SetReference();
-            }
-            if (GUILayout.Button("Kerbin", this.ButtonStyle))
-            {
-                TimeFormatter.SetReference(PSystemManager.Instance.localBodies.Find(body => body.bodyName.Equals("Kerbin")));
-            }
-            GUILayout.EndHorizontal();
-        }
-
-        #endregion
-    }
-}

--- a/KerbalEngineer/Flight/Readouts/Orbital/AngleToEquatorialAscendingNode.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/AngleToEquatorialAscendingNode.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Angle to Equ. AN";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = string.Empty;
+            this.HelpString = "Angular Distance from the vessel to crossing the Equator of the central body, going north of it.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/AngleToEquatorialDescendingNode.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/AngleToEquatorialDescendingNode.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Angle to Equ. DN";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = string.Empty;
+            this.HelpString = "Angular Distance from the vessel to crossing the Equator of the central body, going south of it.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/AngleToPrograde.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/AngleToPrograde.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Angle to Prograde";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "Angular Distance from the vessel to crossing the Orbit of the central body on it's retrograde side.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/AngleToRetrograde.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/AngleToRetrograde.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Angle to Retrograde";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "Angular Distance from the vessel to crossing the Orbit of the central body on it's retrograde side.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/ApoapsisHeight.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ApoapsisHeight.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Apoapsis Height";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = "Shows the vessel's apoapsis height relative to sea level.  (Apoapsis is the highest point of an orbit.)";
+            this.HelpString = "Shows the vessel's apoapsis height relative to sea level. (Apoapsis is the highest point of an orbit.)";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/Inclination.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/Inclination.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Inclination";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = "Shows the vessel's orbital inclination.";
+            this.HelpString = "Shows the vessel's orbital inclination relative to the Equator.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/ManoeuvreProcessor.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/ManoeuvreProcessor.cs
@@ -63,6 +63,10 @@
 
         public static double NormalDeltaV { get; private set; }
 
+        public static double PostBurnAp { get; private set; }
+
+        public static double PostBurnPe { get; private set; }
+
         public static double ProgradeDeltaV { get; private set; }
 
         public static double RadialDeltaV { get; private set; }
@@ -110,6 +114,8 @@
             NormalDeltaV = deltaV.y;
             RadialDeltaV = deltaV.x;
             TotalDeltaV = node.GetBurnVector(FlightGlobals.ship_orbit).magnitude;
+            PostBurnAp = node.nextPatch != null ? node.nextPatch.ApA : 0;
+            PostBurnPe = node.nextPatch != null ? node.nextPatch.PeA : 0;
 
             UniversalTime = FlightGlobals.ActiveVessel.patchedConicSolver.maneuverNodes[0].UT;
             AngleToPrograde = FlightGlobals.ActiveVessel.patchedConicSolver.maneuverNodes[0].patch.GetAngleToPrograde(UniversalTime);

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeAngleToPrograde.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeAngleToPrograde.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Manoeuvre Node Angle to Prograde";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "Angular Distance from the Node to crossing the Orbit of the central body on it's prograde side.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeAngleToRetrograde.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeAngleToRetrograde.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Manoeuvre Node Angle to Retrograde";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "Angular Distance from the Node to crossing the Orbit of the central body on it's retrograde side.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeBurnTime.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeBurnTime.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Manoeuvre Node Burn Time";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "The burn's total duration.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeHalfBurnTime.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeHalfBurnTime.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Manoeuvre Node Half Burn Time";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "Half of the burn's total duration.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeNormalDeltaV.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeNormalDeltaV.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Manoeuvre Node DeltaV (Normal)";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "Normal component of the total change in velocity.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeProgradeDeltaV.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeProgradeDeltaV.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Manoeuvre Node DeltaV (Prograde)";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "Prograde/Retrograde component of the total change in velocity.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeRadialDeltaV.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeRadialDeltaV.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Manoeuvre Node DeltaV (Radial)";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "Radial component of the total change in velocity.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeTimeToHalfBurn.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeTimeToHalfBurn.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Time to Manoeuvre Burn";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "Time until the Manoeuvre should be started.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeTimeToManoeuvre.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeTimeToManoeuvre.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Time to Manoeuvre Node";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "Time until the vessel reaches the position of the Manoeuvre Node.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeTotalDeltaV.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/NodeTotalDeltaV.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Manoeuvre Node DeltaV (Total)";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = String.Empty;
+            this.HelpString = "Total change in velocity during the burn.";
             this.IsDefault = true;
         }
 

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/PostBurnApoapsis.cs
@@ -1,1 +1,69 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using System;
+
+using KerbalEngineer.Extensions;
+using KerbalEngineer.Flight.Sections;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Orbital.ManoeuvreNode
+{
+    public class PostBurnApoapsis : ReadoutModule
+    {
+        #region Constructors
+
+        public PostBurnApoapsis()
+        {
+            this.Name = "Post-burn Apoapsis";
+            this.Category = ReadoutCategory.GetCategory("Orbital");
+            this.HelpString = "Farthest point of the vessel's ofbit after the burn.";
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            if (!ManoeuvreProcessor.ShowDetails)
+            {
+                return;
+            }
+
+            this.DrawLine("Post-burn Apoapsis", ManoeuvreProcessor.PostBurnAp.ToDistance(), section.IsHud);
+        }
+
+        public override void Reset()
+        {
+            ManoeuvreProcessor.Reset();
+        }
+
+        public override void Update()
+        {
+            ManoeuvreProcessor.RequestUpdate();
+        }
+
+        #endregion
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/PostBurnPeriapsis.cs
@@ -1,1 +1,69 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using System;
+
+using KerbalEngineer.Extensions;
+using KerbalEngineer.Flight.Sections;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Orbital.ManoeuvreNode
+{
+    public class PostBurnPeriapsis : ReadoutModule
+    {
+        #region Constructors
+
+        public PostBurnPeriapsis()
+        {
+            this.Name = "Post-burn Periapsis";
+            this.Category = ReadoutCategory.GetCategory("Orbital");
+            this.HelpString = "Closest point of the vessel's ofbit after the burn.";
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            if (!ManoeuvreProcessor.ShowDetails)
+            {
+                return;
+            }
+
+            this.DrawLine("Post-burn Periapsis", ManoeuvreProcessor.PostBurnPe.ToDistance(), section.IsHud);
+        }
+
+        public override void Reset()
+        {
+            ManoeuvreProcessor.Reset();
+        }
+
+        public override void Update()
+        {
+            ManoeuvreProcessor.RequestUpdate();
+        }
+
+        #endregion
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/Orbital/PeriapsisHeight.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/PeriapsisHeight.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Periapsis Height";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = "Shows the vessel's periapsis height relative to sea level. (Periapsis is the lowest point of an orbit.";
+            this.HelpString = "Shows the vessel's periapsis height relative to sea level. (Periapsis is the lowest point of an orbit.)";
             this.IsDefault = true;
         }
 

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Orbital/SpeedAtApoapsis.cs
@@ -1,1 +1,68 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using System;
+using KerbalEngineer.Flight.Sections;
+using KerbalEngineer.Helpers;
+using KerbalEngineer.Extensions;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Orbital
+{
+    public class SpeedAtApoapsis : ReadoutModule
+    {
+        #region Constructors
+
+        public SpeedAtApoapsis()
+        {
+            this.Name = "Speed at Apoapsis";
+            this.Category = ReadoutCategory.GetCategory("Orbital");
+            this.HelpString = "Shows the orbital speed of the vessel when at apoapsis, the highest point of the orbit.";
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            // Vis-viva: v^2 = GM(2/r - 1/a)
+            // All this is easily got from the ships orbit (and reference body)
+            String str;
+            Orbit orbit = FlightGlobals.ship_orbit;
+            if (orbit.eccentricity > 1.0)
+                str = "---m/s";
+            else
+            {
+                double speedsqr = orbit.referenceBody.gravParameter * ((2 / orbit.ApR) - (1 / orbit.semiMajorAxis));
+                if (Double.IsNaN(speedsqr) || speedsqr < 0)
+                    str = "---m/s";     // Don't think this is possible barring bugs in the Orbit class
+                else
+                    str = Math.Sqrt(speedsqr).ToSpeed();
+            }
+            this.DrawLine(str, section.IsHud);
+        }
+
+        #endregion
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Orbital/SpeedAtPeriapsis.cs
@@ -1,1 +1,64 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using System;
+using KerbalEngineer.Flight.Sections;
+using KerbalEngineer.Helpers;
+using KerbalEngineer.Extensions;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Orbital
+{
+    public class SpeedAtPeriapsis : ReadoutModule
+    {
+        #region Constructors
+
+        public SpeedAtPeriapsis()
+        {
+            this.Name = "Speed at Periapsis";
+            this.Category = ReadoutCategory.GetCategory("Orbital");
+            this.HelpString = "Shows the orbital speed of the vessel when at periapsis, the lowest point of the orbit.";
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            // Vis-viva: v^2 = GM(2/r - 1/a)
+            // All this is easily got from the ships orbit (and reference body)
+            String str;
+            Orbit orbit = FlightGlobals.ship_orbit;
+            double oneovera = (orbit.eccentricity == 1) ? 0 : (1 / orbit.semiMajorAxis);
+            double speedsqr = orbit.referenceBody.gravParameter * ((2 / orbit.PeR) - oneovera);
+            if (Double.IsNaN(speedsqr) || speedsqr < 0)
+                str = "---m/s";
+            else
+                str = Math.Sqrt(speedsqr).ToSpeed();
+            this.DrawLine(str, section.IsHud);
+        }
+
+        #endregion
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Orbital/TimeToAtmosphere.cs
@@ -1,1 +1,99 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using System;
+using KerbalEngineer.Flight.Sections;
+using KerbalEngineer.Helpers;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Orbital
+{
+    public class TimeToAtmosphere : ReadoutModule
+    {
+        //private LogMsg log = new LogMsg();
+        
+        #region Constructors
+
+        public TimeToAtmosphere()
+        {
+            this.Name = "Time to Atmosphere";
+            this.Category = ReadoutCategory.GetCategory("Orbital");
+            this.HelpString = "Shows the time until the vessel enters or leaves the atmosphere.";
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            String str;
+            Orbit orbit = FlightGlobals.ship_orbit;
+
+			if (orbit.referenceBody.atmosphere && orbit.PeA < orbit.referenceBody.atmosphereDepth && orbit.ApA > orbit.referenceBody.atmosphereDepth)
+            {
+                double tA = orbit.TrueAnomalyAtRadius(orbit.referenceBody.atmosphereDepth + orbit.referenceBody.Radius);
+                //log.buf.AppendFormat("tA = {0}\n", tA);
+                double utTime = Planetarium.GetUniversalTime();
+                //log.buf.AppendFormat("utTime = {0}\n", utTime);
+                double timeAtRad1 = orbit.GetUTforTrueAnomaly(tA, orbit.period * 0.5);
+                //log.buf.AppendFormat("timeAtRad1 = {0}\n", timeAtRad1);
+                if (timeAtRad1 < utTime)
+                {
+                    timeAtRad1 += orbit.period;
+                    //log.buf.AppendFormat("timeAtRad1 = {0}\n", timeAtRad1);
+                }
+                double timeAtRad2 = orbit.GetUTforTrueAnomaly(-tA, orbit.period * 0.5);
+                //log.buf.AppendFormat("timeAtRad2 = {0}\n", timeAtRad2);
+                if (timeAtRad2 < utTime)
+                {
+                    timeAtRad2 += orbit.period;
+                    //log.buf.AppendFormat("timeAtRad2 = {0}\n", timeAtRad2);
+                }
+                double time = Math.Min(timeAtRad1, timeAtRad2) - utTime;
+                //log.buf.AppendFormat("time = {0}\n", time);
+
+                if (Double.IsNaN(time))
+                {
+                    str = "---s";
+                    //log.buf.AppendLine("time is NaN");
+                }
+                else
+                {
+                    str = TimeFormatter.ConvertToString(time);
+                    //log.buf.AppendFormat("str = {0}\n", str);
+                }
+            }
+            else
+            {
+                str = "---s";
+                //log.buf.AppendLine("no atmosphere, pe > atmosphere, or ap < atmosphere");
+            }
+
+            //log.Flush();
+            this.DrawLine(str, section.IsHud);
+        }
+
+        #endregion
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/Orbital/TimeToEquatorialAscendingNode.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/TimeToEquatorialAscendingNode.cs
@@ -35,7 +35,7 @@
         {
             this.Name = "Time to Equ. AN";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the time until the vessel corsses the Equator, going north of it.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Orbital/TimeToEquatorialDescendingNode.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/TimeToEquatorialDescendingNode.cs
@@ -35,7 +35,7 @@
         {
             this.Name = "Time to Equ. DN";
             this.Category = ReadoutCategory.GetCategory("Orbital");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the time until the vessel corsses the Equator, going south of it.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/ReadoutLibrary.cs
+++ b/KerbalEngineer/Flight/Readouts/ReadoutLibrary.cs
@@ -1,6 +1,4 @@
 // 
-//     Kerbal Engineer Redux
-// 
 //     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
@@ -93,6 +91,11 @@
                 readouts.Add(new NodeTimeToHalfBurn());
                 readouts.Add(new NodeAngleToPrograde());
                 readouts.Add(new NodeAngleToRetrograde());
+                readouts.Add(new PostBurnApoapsis());
+                readouts.Add(new PostBurnPeriapsis());
+                readouts.Add(new SpeedAtApoapsis());
+                readouts.Add(new SpeedAtPeriapsis());
+                readouts.Add(new TimeToAtmosphere());
 
                 // Surface
                 readouts.Add(new AltitudeSeaLevel());
@@ -117,6 +120,7 @@
                 readouts.Add(new ImpactBiome());
 
                 // Vessel
+                readouts.Add(new Name());
                 readouts.Add(new DeltaVStaged());
                 readouts.Add(new DeltaVCurrent());
                 readouts.Add(new DeltaVTotal());
@@ -164,6 +168,8 @@
                 readouts.Add(new Rendezvous.OrbitalPeriod());
                 readouts.Add(new Rendezvous.SemiMajorAxis());
                 readouts.Add(new Rendezvous.SemiMinorAxis());
+                readouts.Add(new Rendezvous.RelativeRadialVelocity());
+                readouts.Add(new Rendezvous.TimeToRendezvous());
 
                 // Thermal
                 readouts.Add(new InternalFlux());
@@ -171,17 +177,19 @@
                 readouts.Add(new RadiationFlux());
                 readouts.Add(new CriticalPart());
                 readouts.Add(new CriticalTemperature());
-                readouts.Add(new CriticalPercentage());
+                readouts.Add(new CriticalSkinTemperature());
+                readouts.Add(new CriticalThermalPercentage());
                 readouts.Add(new HottestPart());
                 readouts.Add(new HottestTemperature());
+                readouts.Add(new HottestSkinTemperature());
                 readouts.Add(new CoolestPart());
                 readouts.Add(new CoolestTemperature());
+                readouts.Add(new CoolestSkinTemperature());
 
                 // Misc
                 readouts.Add(new Separator());
                 readouts.Add(new GuiSizeAdjustor());
                 readouts.Add(new SimulationDelay());
-                readouts.Add(new TimeReference());
                 readouts.Add(new VectoredThrustToggle());
                 readouts.Add(new SystemTime());
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/AltitudeSeaLevel.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/AltitudeSeaLevel.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Altitude (Sea Level)";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the target's altitude above sea level.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/AngleToRelativeAscendingNode.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/AngleToRelativeAscendingNode.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Angle to Rel. AN";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Angular Distance from the vessel to crossing the orbit of the target object, going north of it.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/AngleToRelativeDescendingNode.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/AngleToRelativeDescendingNode.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Angle to Rel. DN";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Angular Distance from the vessel to crossing the orbit of the target object, going south of it.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/ApoapsisHeight.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/ApoapsisHeight.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Apoapsis Height";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the targets's apoapsis height relative to sea level. (Apoapsis is the highest point of an orbit.)";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/Distance.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/Distance.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Distance";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Current distance between the vessel and the target object.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/OrbitalPeriod.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/OrbitalPeriod.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Orbital Period";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the amount of time it will take the target object to complete a full orbit.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/PeriapsisHeight.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/PeriapsisHeight.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Periapsis Height";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the targets's periapsis height relative to sea level. (Periapsis is the lowest point of an orbit.)";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/PhaseAngle.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/PhaseAngle.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Phase Angle";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Angular distance of the vessel relative to the target object.";
             this.IsDefault = true;
         }
 

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/RelativeRadialVelocity.cs
@@ -1,1 +1,66 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using KerbalEngineer.Extensions;
+using KerbalEngineer.Flight.Sections;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Rendezvous
+{
+    public class RelativeRadialVelocity : ReadoutModule
+    {
+        #region Constructors
+
+        public RelativeRadialVelocity()
+        {
+            this.Name = "Relative Radial Velocity";
+            this.Category = ReadoutCategory.GetCategory("Rendezvous");
+            this.HelpString = "Relative radial velocity between your vessel and the target object";
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            if (RendezvousProcessor.ShowDetails)
+            {
+               this.DrawLine(RendezvousProcessor.RelativeRadialVelocity.ToSpeed(), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(RendezvousProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            RendezvousProcessor.RequestUpdate();
+        }
+
+        #endregion
+    }
+}
+

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/RendezvousProcessor.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/RendezvousProcessor.cs
@@ -135,6 +135,16 @@
         ///     Gets the target's time to periapsis.
         /// </summary>
         public static double TimeToPeriapsis { get; private set; }
+
+        /// <summary>
+        ///     Gets the relative radial velocity.
+        /// </summary>
+        public static double RelativeRadialVelocity { get; private set; }
+
+        /// <summary>
+        ///     Gets approximate (linearly) time to the minimum distance between objects.
+        /// </summary>
+        public static double TimeToRendezvous { get; private set; }
 
         /// <summary>
         ///     Gets and sets whether the updatable object should be updated.
@@ -193,6 +203,14 @@
 
             Distance = Vector3d.Distance(targetOrbit.pos, originOrbit.pos);
             OrbitalPeriod = targetOrbit.period;
+
+            // beware that the order/sign of coordinates is inconsistent across different exposed variables
+            // in particular, v below does not equal to FlightGlobals.ship_tgtVelocity
+            Vector3d x = targetOrbit.pos - originOrbit.pos;
+            Vector3d v = targetOrbit.vel - originOrbit.vel;
+            double xv = Vector3d.Dot(x, v);
+            TimeToRendezvous = - xv / Vector3d.SqrMagnitude(v);
+            RelativeRadialVelocity = xv / Vector3d.Magnitude(x);
         }
 
         private double CalcInterceptAngle()

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/SemiMajorAxis.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/SemiMajorAxis.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Semi-major Axis";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = String.Empty;
+            this.HelpString = "Shows the distance from the centre of the target's orbit to the farthest edge.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/SemiMinorAxis.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/SemiMinorAxis.cs
@@ -36,7 +36,7 @@
         {
             this.Name = "Semi-minor Axis";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = String.Empty;
+            this.HelpString = "Shows the distance from the centre of the target's orbit to the nearest edge.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/TimeToApoapsis.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/TimeToApoapsis.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Time to Apoapsis";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the time until the target reaches apoapsis, the highest point of the orbit.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/TimeToPeriapsis.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/TimeToPeriapsis.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Time to Periapsis";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the time until the target reaches periapsis, the lowest point of the orbit.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/TimeToRelativeAscendingNode.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/TimeToRelativeAscendingNode.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Time to Rel. AN";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Time until the vessel crosses the target's orbit, going north.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/TimeToRelativeDescendingNode.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/TimeToRelativeDescendingNode.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Time to Rel. DN";
             this.Category = ReadoutCategory.GetCategory("Rendezvous");
-            this.HelpString = string.Empty;
+            this.HelpString = "Time until the vessel crosses the target's orbit, going south.";
             this.IsDefault = true;
         }
 

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/TimeToRendezvous.cs
@@ -1,1 +1,65 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using KerbalEngineer.Flight.Sections;
+using KerbalEngineer.Helpers;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Rendezvous
+{
+    public class TimeToRendezvous : ReadoutModule
+    {
+        #region Constructors
+
+        public TimeToRendezvous()
+        {
+            this.Name = "Time to Rendezvous";
+            this.Category = ReadoutCategory.GetCategory("Rendezvous");
+            this.HelpString = "Approximate (linearly) time to the minimum distance between objects.";
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            if (RendezvousProcessor.ShowDetails)
+            {
+               this.DrawLine(TimeFormatter.ConvertToString(RendezvousProcessor.TimeToRendezvous), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(RendezvousProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            RendezvousProcessor.RequestUpdate();
+        }
+
+        #endregion
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/Surface/HorizontalSpeed.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/HorizontalSpeed.cs
@@ -21,6 +21,7 @@
 
 using KerbalEngineer.Extensions;
 using KerbalEngineer.Flight.Sections;
+using System;
 
 #endregion
 
@@ -44,7 +45,11 @@
 
         public override void Draw(SectionModule section)
         {
-            this.DrawLine(FlightGlobals.ActiveVessel.horizontalSrfSpeed.ToSpeed(), section.IsHud);
+            // Used to do this but the bug-fix to horizontalSrfSpeed in KSP 1.0.3 actually made it worse so workaround
+            //this.DrawLine(FlightGlobals.ActiveVessel.horizontalSrfSpeed.ToSpeed(), section.IsHud);
+            var ves = FlightGlobals.ActiveVessel;
+            double horizSpeed = Math.Sqrt(ves.srfSpeed * ves.srfSpeed - ves.verticalSpeed * ves.verticalSpeed);
+            this.DrawLine(horizSpeed.ToSpeed(), section.IsHud);
         }
 
         #endregion

--- a/KerbalEngineer/Flight/Readouts/Surface/ImpactAltitude.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/ImpactAltitude.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Impact Altitude";
             this.Category = ReadoutCategory.GetCategory("Surface");
-            this.HelpString = string.Empty;
+            this.HelpString = "Altitude at which the Vessel will impact.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Surface/ImpactBiome.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/ImpactBiome.cs
@@ -33,7 +33,7 @@
         {
             this.Name = "Impact Biome";
             this.Category = ReadoutCategory.GetCategory("Surface");
-            this.HelpString = string.Empty;
+            this.HelpString = "Biome the Vessel will impact in.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Surface/ImpactLatitude.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/ImpactLatitude.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Impact Latitude";
             this.Category = ReadoutCategory.GetCategory("Surface");
-            this.HelpString = string.Empty;
+            this.HelpString = "Latitude of the impact position.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Surface/ImpactLongitude.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/ImpactLongitude.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Impact Longitude";
             this.Category = ReadoutCategory.GetCategory("Surface");
-            this.HelpString = string.Empty;
+            this.HelpString = "Longditude of the impact position.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Surface/ImpactTime.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/ImpactTime.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Impact Time";
             this.Category = ReadoutCategory.GetCategory("Surface");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows time until the vessel impacts the central object.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Surface/Latitude.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/Latitude.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Latitude";
             this.Category = ReadoutCategory.GetCategory("Surface");
-            this.HelpString = "Shows the vessel's latitude position around the celestial body.  Latitude is the angle from the equator to poles.";
+            this.HelpString = "Shows the vessel's latitude position around the celestial body. Latitude is the angle from the equator to poles.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Surface/Longitude.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/Longitude.cs
@@ -28,7 +28,7 @@
         {
             Name = "Longitude";
             Category = ReadoutCategory.GetCategory("Surface");
-            HelpString = "Shows the vessel's longitude around a celestial body.  Longitude is the angle from the bodies prime meridian.";
+            HelpString = "Shows the vessel's longitude around a celestial body. Longitude is the angle from the bodies prime meridian.";
             IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Surface/Situation.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/Situation.cs
@@ -33,7 +33,7 @@
         {
             this.Name = "Situation";
             this.Category = ReadoutCategory.GetCategory("Surface");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the vessel's current scientific situation. (Landed, Splashed, Flying Low/High, In Space Low/High)";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Thermal/CoolestPart.cs
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CoolestPart.cs
@@ -27,7 +27,7 @@
         {
             Name = "Coolest Part";
             Category = ReadoutCategory.GetCategory("Thermal");
-            HelpString = string.Empty;
+            HelpString = "The part of the vessel that is enduring the lowest temperature.";
             IsDefault = true;
         }
 

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CoolestSkinTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class CoolestSkinTemperature : ReadoutModule
+    {
+        public CoolestSkinTemperature()
+        {
+            Name = "Coolest Skin Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = "Lowest external Temperature on the Vessel.";
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.CoolestSkinTemperature, ThermalProcessor.CoolestSkinTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/Thermal/CoolestTemperature.cs
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CoolestTemperature.cs
@@ -28,7 +28,7 @@
         {
             Name = "Coolest Temperature";
             Category = ReadoutCategory.GetCategory("Thermal");
-            HelpString = string.Empty;
+            HelpString = "Lowest internal Temperature on the Vessel.";
             IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Thermal/CriticalPart.cs
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CriticalPart.cs
@@ -27,7 +27,7 @@
         {
             Name = "Critical Part";
             Category = ReadoutCategory.GetCategory("Thermal");
-            HelpString = string.Empty;
+            HelpString = "This part is structually most critical. If it endures too high temperature there is a high chance for major structual failure!";
             IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Thermal/CriticalPercentage.cs
+++ /dev/null
@@ -1,53 +1,1 @@
-// 
-//     Kerbal Engineer Redux
-// 
-//     Copyright (C) 2015 CYBUTEK
-// 
-//     This program is free software: you can redistribute it and/or modify
-//     it under the terms of the GNU General Public License as published by
-//     the Free Software Foundation, either version 3 of the License, or
-//     (at your option) any later version.
-// 
-//     This program is distributed in the hope that it will be useful,
-//     but WITHOUT ANY WARRANTY; without even the implied warranty of
-//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-//     GNU General Public License for more details.
-// 
-//     You should have received a copy of the GNU General Public License
-//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
-// 
 
-namespace KerbalEngineer.Flight.Readouts.Thermal
-{
-    using Extensions;
-    using Sections;
-
-    public class CriticalPercentage : ReadoutModule
-    {
-        public CriticalPercentage()
-        {
-            Name = "Critical Percentage";
-            Category = ReadoutCategory.GetCategory("Thermal");
-            HelpString = string.Empty;
-            IsDefault = true;
-        }
-
-        public override void Draw(SectionModule section)
-        {
-            if (ThermalProcessor.ShowDetails)
-            {
-                DrawLine(ThermalProcessor.CriticalTemperaturePercentage.ToPercent(), section.IsHud);
-            }
-        }
-
-        public override void Reset()
-        {
-            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
-        }
-
-        public override void Update()
-        {
-            ThermalProcessor.RequestUpdate();
-        }
-    }
-}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CriticalSkinTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class CriticalSkinTemperature : ReadoutModule
+    {
+        public CriticalSkinTemperature()
+        {
+            Name = "Critical Skin Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = "Highest external Temperature on the part of the Vessel that is structually most critical.";
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.CriticalSkinTemperature, ThermalProcessor.CriticalSkinTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/Thermal/CriticalTemperature.cs
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CriticalTemperature.cs
@@ -28,7 +28,7 @@
         {
             Name = "Critical Temperature";
             Category = ReadoutCategory.GetCategory("Thermal");
-            HelpString = string.Empty;
+            HelpString = "Internal Temperature on the part of the Vessel that is structually most critical.";
             IsDefault = true;
         }
 

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CriticalThermalPercentage.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Extensions;
+    using Sections;
+
+    public class CriticalThermalPercentage : ReadoutModule
+    {
+        public CriticalThermalPercentage()
+        {
+            Name = "Critical Thermal Percentage";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = "Shows how high a temperature the critical Part is enduring relative to it's maximal temperature.";
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(ThermalProcessor.CriticalTemperaturePercentage.ToPercent(), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/Thermal/HottestPart.cs
+++ b/KerbalEngineer/Flight/Readouts/Thermal/HottestPart.cs
@@ -27,7 +27,7 @@
         {
             Name = "Hottest Part";
             Category = ReadoutCategory.GetCategory("Thermal");
-            HelpString = string.Empty;
+            HelpString = "The part of the vessel that is enduring the highest temperature.";
             IsDefault = true;
         }
 

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/HottestSkinTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class HottestSkinTemperature : ReadoutModule
+    {
+        public HottestSkinTemperature()
+        {
+            Name = "Hottest Skin Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = "Highest external Temperature on the Vessel.";
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.HottestSkinTemperature, ThermalProcessor.HottestSkinTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/Thermal/HottestTemperature.cs
+++ b/KerbalEngineer/Flight/Readouts/Thermal/HottestTemperature.cs
@@ -28,7 +28,7 @@
         {
             Name = "Hottest Temperature";
             Category = ReadoutCategory.GetCategory("Thermal");
-            HelpString = string.Empty;
+            HelpString = "Highest internal Temperature on the Vessel.";
             IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Thermal/ThermalProcessor.cs
+++ b/KerbalEngineer/Flight/Readouts/Thermal/ThermalProcessor.cs
@@ -1,6 +1,4 @@
 // 
-//     Kerbal Engineer Redux
-// 
 //     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
@@ -19,6 +17,8 @@
 
 namespace KerbalEngineer.Flight.Readouts.Thermal
 {
+    using System;
+
     public class ThermalProcessor : IUpdatable, IUpdateRequest
     {
         private static readonly ThermalProcessor instance = new ThermalProcessor();
@@ -27,10 +27,16 @@
         {
             HottestTemperature = 0.0;
             HottestTemperatureMax = 0.0;
+            HottestSkinTemperature = 0.0;
+            HottestSkinTemperatureMax = 0.0;
             CoolestTemperature = 0.0;
             CoolestTemperatureMax = 0.0;
+            CoolestSkinTemperature = 0.0;
+            CoolestSkinTemperatureMax = 0.0;
             CriticalTemperature = 0.0;
             CriticalTemperatureMax = 0.0;
+            CriticalSkinTemperature = 0.0;
+            CriticalSkinTemperatureMax = 0.0;
             HottestPartName = string.Empty;
             CoolestPartName = string.Empty;
             CriticalPartName = string.Empty;
@@ -40,11 +46,19 @@
 
         public static string CoolestPartName { get; private set; }
 
+        public static double CoolestSkinTemperature { get; private set; }
+
+        public static double CoolestSkinTemperatureMax { get; private set; }
+
         public static double CoolestTemperature { get; private set; }
 
         public static double CoolestTemperatureMax { get; private set; }
 
         public static string CriticalPartName { get; private set; }
+
+        public static double CriticalSkinTemperature { get; private set; }
+
+        public static double CriticalSkinTemperatureMax { get; private set; }
 
         public static double CriticalTemperature { get; private set; }
 
@@ -53,6 +67,10 @@
         public static double CriticalTemperaturePercentage { get; private set; }
 
         public static string HottestPartName { get; private set; }
+
+        public static double HottestSkinTemperature { get; private set; }
+
+        public static double HottestSkinTemperatureMax { get; private set; }
 
         public static double HottestTemperature { get; private set; }
 
@@ -69,14 +87,8 @@
         public static double InternalFlux { get; private set; }
 
         public static double RadiationFlux { get; private set; }
+
         public static bool ShowDetails { get; private set; }
-
-        public bool UpdateRequested { get; set; }
-
-        public static void RequestUpdate()
-        {
-            instance.UpdateRequested = true;
-        }
 
         public void Update()
         {
@@ -92,8 +104,11 @@
             RadiationFlux = 0.0;
             InternalFlux = 0.0;
             HottestTemperature = 0.0;
+            HottestSkinTemperature = 0.0;
             CoolestTemperature = double.MaxValue;
+            CoolestSkinTemperature = double.MaxValue;
             CriticalTemperature = double.MaxValue;
+            CriticalSkinTemperature = double.MaxValue;
             CriticalTemperaturePercentage = 0.0;
             HottestPartName = string.Empty;
             CoolestPartName = string.Empty;
@@ -107,26 +122,40 @@
                 RadiationFlux = RadiationFlux + part.thermalRadiationFlux;
                 InternalFlux = InternalFlux + part.thermalInternalFluxPrevious;
 
-                if (part.temperature > HottestTemperature)
+                if (part.temperature > HottestTemperature || part.skinTemperature > HottestSkinTemperature)
                 {
                     HottestTemperature = part.temperature;
                     HottestTemperatureMax = part.maxTemp;
+                    HottestSkinTemperature = part.skinTemperature;
+                    HottestSkinTemperatureMax = part.skinMaxTemp;
                     HottestPartName = part.partInfo.title;
                 }
-                if (part.temperature < CoolestTemperature)
+                if (part.temperature < CoolestTemperature || part.skinTemperature < CoolestSkinTemperature)
                 {
                     CoolestTemperature = part.temperature;
                     CoolestTemperatureMax = part.maxTemp;
+                    CoolestSkinTemperature = part.skinTemperature;
+                    CoolestSkinTemperatureMax = part.skinMaxTemp;
                     CoolestPartName = part.partInfo.title;
                 }
-                if (part.temperature / part.maxTemp > CriticalTemperaturePercentage)
+
+                if (part.temperature / part.maxTemp > CriticalTemperaturePercentage || part.skinTemperature / part.skinMaxTemp > CriticalTemperaturePercentage)
                 {
                     CriticalTemperature = part.temperature;
                     CriticalTemperatureMax = part.maxTemp;
-                    CriticalTemperaturePercentage = part.temperature / part.maxTemp;
+                    CriticalSkinTemperature = part.skinTemperature;
+                    CriticalSkinTemperatureMax = part.skinMaxTemp;
+                    CriticalTemperaturePercentage = Math.Max(part.temperature / part.maxTemp, part.skinTemperature / part.skinMaxTemp);
                     CriticalPartName = part.partInfo.title;
                 }
             }
         }
+
+        public bool UpdateRequested { get; set; }
+
+        public static void RequestUpdate()
+        {
+            instance.UpdateRequested = true;
+        }
     }
 }

--- a/KerbalEngineer/Flight/Readouts/Vessel/Acceleration.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/Acceleration.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Acceleration";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the current and maximum acceleration of the craft.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/DeltaVStaged.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/DeltaVStaged.cs
@@ -30,13 +30,6 @@
 {
     public class DeltaVStaged : ReadoutModule
     {
-        #region Fields
-
-        private int numberOfStages;
-        private bool showing;
-
-        #endregion
-
         #region Constructors
 
         public DeltaVStaged()

--- a/KerbalEngineer/Flight/Readouts/Vessel/Heading.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/Heading.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Heading";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the current Heading.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/HeadingRate.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/HeadingRate.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Heading Rate";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the current change in Heading.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirDemand.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirDemand.cs
@@ -39,7 +39,7 @@
         {
             this.Name = "Intake Air (Demand)";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Displays the Amount of Intake Air required.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirDemandSupply.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirDemandSupply.cs
@@ -42,7 +42,7 @@
         {
             this.Name = "Intake Air (D/S)";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Displays the Ration between required and available Intake Air.";
             this.IsDefault = false;
         }
 
@@ -55,20 +55,11 @@
             var demand = 0.0;
             foreach (var part in FlightGlobals.ActiveVessel.Parts)
             {
-                if (part.Modules.Contains("ModuleEngines"))
+                for (int i = 0; i < part.Modules.Count; i++)
                 {
-                    var engine = part.Modules["ModuleEngines"] as ModuleEngines;
-                    if (engine.isOperational)
-                    {
-                        demand += engine.propellants
-                            .Where(p => p.name == "IntakeAir")
-                            .Sum(p => p.currentRequirement);
-                    }
-                }
-                if (part.Modules.Contains("ModuleEnginesFX"))
-                {
-                    var engine = part.Modules["ModuleEnginesFX"] as ModuleEnginesFX;
-                    if (engine.isOperational)
+                    PartModule partmod = part.Modules[i];
+                    var engine = partmod as ModuleEngines;
+                    if (engine != null && engine.isOperational)
                     {
                         demand += engine.propellants
                             .Where(p => p.name == "IntakeAir")

--- a/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirSupply.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirSupply.cs
@@ -39,7 +39,7 @@
         {
             this.Name = "Intake Air (Supply)";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Displays the available Intake Air.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirUsage.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirUsage.cs
@@ -42,7 +42,7 @@
         {
             this.Name = "Intake Air (Usage)";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Displays the consumption of Intake Air.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/Mass.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/Mass.cs
@@ -28,19 +28,13 @@
 {
     public class Mass : ReadoutModule
     {
-        #region Fields
-
-        private bool showing;
-
-        #endregion
-
         #region Constructors
 
         public Mass()
         {
             this.Name = "Mass";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Displays the total Mass of the Vessel.";
             this.IsDefault = true;
         }
 

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Vessel/Name.cs
@@ -1,1 +1,55 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using KerbalEngineer.Flight.Sections;
+using KerbalEngineer.Helpers;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Vessel
+{
+    public class Name : ReadoutModule
+    {
+        #region Constructors
+
+        public Name()
+        {
+            Name = "Name";
+            Category = ReadoutCategory.GetCategory("Vessel");
+            HelpString = "Displays the name of the current vessel.";
+            IsDefault = true;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            if (SimulationProcessor.ShowDetails)
+            {
+                DrawLine(FlightGlobals.ActiveVessel.vesselName);
+            }
+        }
+
+        #endregion
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/Vessel/PartCount.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/PartCount.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Part Count";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the total number of Parts the current and next stage.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/Pitch.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/Pitch.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Pitch";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the current Pitch angle.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/PitchRate.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/PitchRate.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Pitch Rate";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the current Pitch speed.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/Roll.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/Roll.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Roll";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the current Roll angle.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/RollRate.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/RollRate.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Roll Rate";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the current Roll speed.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/SpecificImpulse.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/SpecificImpulse.cs
@@ -33,7 +33,7 @@
         {
             this.Name = "Specific Impulse";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the average Specific Impulse of all engines in the current stage.";
             this.IsDefault = false;
         }
 

--- a/KerbalEngineer/Flight/Readouts/Vessel/Thrust.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/Thrust.cs
@@ -34,7 +34,7 @@
         {
             this.Name = "Thrust";
             this.Category = ReadoutCategory.GetCategory("Vessel");
-            this.HelpString = string.Empty;
+            this.HelpString = "Shows the current and maximum thrust the vessel can put out.";
             this.IsDefault = true;
         }
 

--- a/KerbalEngineer/Flight/Sections/SectionEditor.cs
+++ b/KerbalEngineer/Flight/Sections/SectionEditor.cs
@@ -215,15 +215,18 @@
             this.ParentSection.Name = GUILayout.TextField(this.ParentSection.Name, this.textStyle);
             var isShowingInControlBar = !string.IsNullOrEmpty(this.ParentSection.Abbreviation);
             this.ParentSection.Abbreviation = GUILayout.TextField(this.ParentSection.Abbreviation, this.textStyle, GUILayout.Width(75.0f));
+
+            ParentSection.IsHud = GUILayout.Toggle(this.ParentSection.IsHud, "HUD", this.readoutButtonStyle, GUILayout.Width(50.0f));
+            if (ParentSection.IsHud)
+            {
+                this.ParentSection.IsHudBackground = GUILayout.Toggle(this.ParentSection.IsHudBackground, "BG", this.readoutButtonStyle, GUILayout.Width(50.0f));
+            }
+
             if (this.ParentSection.IsCustom)
             {
                 if (isShowingInControlBar && string.IsNullOrEmpty(this.ParentSection.Abbreviation))
                 {
                     DisplayStack.Instance.RequestResize();
-                }
-                if (this.ParentSection.IsHud = GUILayout.Toggle(this.ParentSection.IsHud, "HUD", this.readoutButtonStyle, GUILayout.Width(50.0f)))
-                {
-                    this.ParentSection.IsHudBackground = GUILayout.Toggle(this.ParentSection.IsHudBackground, "BG", this.readoutButtonStyle, GUILayout.Width(50.0f));
                 }
 
                 if (GUILayout.Button("DELETE SECTION", this.readoutButtonStyle, GUILayout.Width(150.0f)))

--- a/KerbalEngineer/Flight/Sections/SectionLibrary.cs
+++ b/KerbalEngineer/Flight/Sections/SectionLibrary.cs
@@ -72,9 +72,10 @@
             {
                 Name = "THERMAL",
                 Abbreviation = "HEAT",
-                ReadoutModules = ReadoutLibrary.GetCategory(ReadoutCategory.GetCategory("Thermal")).Where(r => r.IsDefault).ToList()
-            });
-
+                ReadoutModules = ReadoutLibrary.GetCategory(ReadoutCategory.GetCategory("Thermal")).Where(r => r.IsDefault).ToList(),
+                IsCustom = true
+            });
+            
             SectionModule hud1 = new SectionModule
             {
                 Name = "HUD 1",

--- a/KerbalEngineer/Flight/Sections/SectionWindow.cs
+++ b/KerbalEngineer/Flight/Sections/SectionWindow.cs
@@ -134,7 +134,11 @@
                                                    (!this.ParentSection.IsHud || this.ParentSection.IsEditorVisible) ? this.windowStyle
                                                        : this.ParentSection.IsHudBackground && this.ParentSection.LineCount > 0
                                                            ? this.hudWindowBgStyle
-                                                           : this.hudWindowStyle).ClampToScreen();
+                                                           : this.hudWindowStyle);
+
+            windowPosition = (ParentSection.IsHud) ? windowPosition.ClampInsideScreen() : windowPosition.ClampToScreen();
+
+
             this.ParentSection.FloatingPositionX = this.windowPosition.x;
             this.ParentSection.FloatingPositionY = this.windowPosition.y;
         }

--- a/KerbalEngineer/Helpers/TimeFormatter.cs
+++ b/KerbalEngineer/Helpers/TimeFormatter.cs
@@ -1,7 +1,5 @@
 // 
-//     Kerbal Engineer Redux
-// 
-//     Copyright (C) 2014 CYBUTEK
+//     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
 //     it under the terms of the GNU General Public License as published by
@@ -17,147 +15,46 @@
 //     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // 
 
-#region Using Directives
-
-using System;
-
-using KerbalEngineer.Settings;
-
-#endregion
-
 namespace KerbalEngineer.Helpers
 {
     public static class TimeFormatter
     {
-        #region Constructors
-
-        static TimeFormatter()
-        {
-            SetReference(false);
-            Load();
-        }
-
-        #endregion
-
-        #region Properties
-
-        public static string Reference { get; set; }
-
-        public static double SecondsPerDay { get; set; }
-
-        public static double SecondsPerHour { get; set; }
-
-        public static double SecondsPerMinute { get; set; }
-
-        public static double SecondsPerYear { get; set; }
-
-        #endregion
-
-        #region Methods: public
-
         public static string ConvertToString(double seconds, string format = "F1")
         {
-            var years = 0;
-            while (seconds >= SecondsPerYear)
+            int years = 0;
+            int days = 0;
+            int hours = 0;
+            int minutes = 0;
+
+            if (seconds > 0.0)
             {
-                years++;
-                seconds -= SecondsPerYear;
-            }
+                years = (int)(seconds / KSPUtil.Year);
+                seconds -= years * KSPUtil.Year;
 
-            var days = 0;
-            while (seconds >= SecondsPerDay)
-            {
-                days++;
-                seconds -= SecondsPerDay;
-            }
+                days = (int)(seconds / KSPUtil.Day);
+                seconds -= days * KSPUtil.Day;
 
-            var hours = 0;
-            while (seconds >= SecondsPerHour)
-            {
-                hours++;
-                seconds -= SecondsPerHour;
-            }
+                hours = (int)(seconds / 3600.0);
+                seconds -= hours * 3600.0;
 
-            var minutes = 0;
-            while (seconds >= SecondsPerMinute)
-            {
-                minutes++;
-                seconds -= SecondsPerMinute;
+                minutes = (int)(seconds / 60.0);
+                seconds -= minutes * 60.0;
             }
 
             if (years > 0)
             {
-                return String.Format("{0}y {1}d {2}h {3}m {4}s", years, days, hours, minutes, seconds.ToString(format));
+                return string.Format("{0}y {1}d {2}h {3}m {4}s", years, days, hours, minutes, seconds.ToString(format));
             }
             if (days > 0)
             {
-                return String.Format("{0}d {1}h {2}m {3}s", days, hours, minutes, seconds.ToString(format));
+                return string.Format("{0}d {1}h {2}m {3}s", days, hours, minutes, seconds.ToString(format));
             }
             if (hours > 0)
             {
-                return String.Format("{0}h {1}m {2}s", hours, minutes, seconds.ToString(format));
+                return string.Format("{0}h {1}m {2}s", hours, minutes, seconds.ToString(format));
             }
 
-            return minutes > 0 ? String.Format("{0}m {1}s", minutes, seconds.ToString(format)) : String.Format("{0}s", seconds.ToString(format));
+            return minutes > 0 ? string.Format("{0}m {1}s", minutes, seconds.ToString(format)) : string.Format("{0}s", seconds.ToString(format));
         }
-
-        public static void Load()
-        {
-            var handler = SettingHandler.Load("TimeFormatter.xml");
-            SecondsPerMinute = handler.Get("SecondsPerMinute", SecondsPerMinute);
-            SecondsPerHour = handler.Get("SecondsPerHour", SecondsPerHour);
-            SecondsPerDay = handler.Get("SecondsPerDay", SecondsPerDay);
-            SecondsPerYear = handler.Get("SecondsPerYear", SecondsPerYear);
-            Reference = handler.Get("Reference", Reference);
-        }
-
-        public static void Save()
-        {
-            var handler = SettingHandler.Load("TimeFormatter.xml");
-            handler.Set("SecondsPerMinute", SecondsPerMinute);
-            handler.Set("SecondsPerHour", SecondsPerHour);
-            handler.Set("SecondsPerDay", SecondsPerDay);
-            handler.Set("SecondsPerYear", SecondsPerYear);
-            handler.Set("Reference", Reference);
-            handler.Save("TimeFormatter.xml");
-        }
-
-        public static void SetReference(bool save = true)
-        {
-            const double minute = 60.0;
-            const double hour = minute * 60.0;
-            const double day = hour * 24.0;
-            const double year = day * 365.0;
-            SetReference(minute, hour, day, year, "Earth", save);
-        }
-
-        public static void SetReference(CelestialBody body, bool save = true)
-        {
-            SetReference(SecondsPerMinute, SecondsPerHour, body.rotationPeriod, body.orbit.period, body.bodyName, save);
-        }
-
-        public static void SetReference(double minute, double hour, double day, double year, string reference, bool save = true)
-        {
-            SecondsPerMinute = minute;
-            SecondsPerHour = hour;
-            SecondsPerDay = day;
-            SecondsPerYear = year;
-            Reference = reference;
-
-            if (save)
-            {
-                Save();
-            }
-        }
-
-        public new static string ToString()
-        {
-            return String.Format("SecondsPerMinute: {0}", SecondsPerMinute) + Environment.NewLine +
-                   String.Format("SecondsPerHour: {0}", SecondsPerHour) + Environment.NewLine +
-                   String.Format("SecondsPerDay: {0}", SecondsPerDay) + Environment.NewLine +
-                   String.Format("SecondsPerYear: {0}", SecondsPerYear) + Environment.NewLine;
-        }
-
-        #endregion
     }
 }

--- a/KerbalEngineer/Helpers/Units.cs
+++ b/KerbalEngineer/Helpers/Units.cs
@@ -205,7 +205,7 @@
 
         public static string ToTorque(double value)
         {
-            return value.ToString((value < 100.0) ? (Math.Abs(value) < Double.Epsilon) ? "N0" : "N1" : "N0") + "kNm";
+            return value.ToString((value < 100.0) ? (Math.Abs(value) < Double.Epsilon) ? "N0" : "N2" : "N0") + "kNm";
         }
     }
 }

--- a/KerbalEngineer/KerbalEngineer.csproj
+++ b/KerbalEngineer/KerbalEngineer.csproj
@@ -53,7 +53,6 @@
     <Compile Include="Flight\Presets\Preset.cs" />
     <Compile Include="Flight\Readouts\Miscellaneous\SystemTime.cs" />
     <Compile Include="Flight\Readouts\Miscellaneous\VectoredThrustToggle.cs" />
-    <Compile Include="Flight\Readouts\Miscellaneous\TimeReference.cs" />
     <Compile Include="Flight\Readouts\Miscellaneous\Separator.cs" />
     <Compile Include="Flight\Readouts\Miscellaneous\GuiSizeAdjustor.cs" />
     <Compile Include="Flight\Readouts\Orbital\AngleToEquatorialDescendingNode.cs" />
@@ -71,11 +70,21 @@
     <Compile Include="Flight\Readouts\Orbital\ManoeuvreNode\NodeAngleToPrograde.cs" />
     <Compile Include="Flight\Readouts\Orbital\ManoeuvreNode\NodeTotalDeltaV.cs" />
     <Compile Include="Flight\Readouts\Orbital\ManoeuvreNode\NodeProgradeDeltaV.cs" />
+    <Compile Include="Flight\Readouts\Orbital\ManoeuvreNode\PostBurnApoapsis.cs" />
+    <Compile Include="Flight\Readouts\Orbital\ManoeuvreNode\PostBurnPeriapsis.cs" />
     <Compile Include="Flight\Readouts\Orbital\MeanAnomalyAtEpoc.cs" />
     <Compile Include="Flight\Readouts\Orbital\MeanAnomaly.cs" />
     <Compile Include="Flight\Readouts\Orbital\EccentricAnomaly.cs" />
     <Compile Include="Flight\Readouts\Orbital\ArgumentOfPeriapsis.cs" />
     <Compile Include="Flight\Readouts\Orbital\CurrentSoi.cs" />
+    <Compile Include="Flight\Readouts\Orbital\SemiMajorAxis.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="Flight\Readouts\Orbital\SpeedAtApoapsis.cs" />
+    <Compile Include="Flight\Readouts\Orbital\SpeedAtPeriapsis.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="Flight\Readouts\Orbital\TimeToAtmosphere.cs" />
     <Compile Include="Flight\Readouts\Orbital\TrueAnomaly.cs" />
     <Compile Include="Flight\Readouts\Orbital\TimeToEquatorialAscendingNode.cs" />
     <Compile Include="Flight\Readouts\Orbital\TimeToEquatorialDescendingNode.cs" />
@@ -91,17 +100,21 @@
     <Compile Include="Flight\Readouts\Surface\HorizontalAcceleration.cs" />
     <Compile Include="Flight\Readouts\Surface\VerticalAcceleration.cs" />
     <Compile Include="Flight\Readouts\Surface\MachNumber.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CoolestSkinTemperature.cs" />
     <Compile Include="Flight\Readouts\Thermal\CriticalPart.cs" />
     <Compile Include="Flight\Readouts\Thermal\CoolestPart.cs" />
     <Compile Include="Flight\Readouts\Thermal\CoolestTemperature.cs" />
-    <Compile Include="Flight\Readouts\Thermal\CriticalPercentage.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CriticalThermalPercentage.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CriticalSkinTemperature.cs" />
     <Compile Include="Flight\Readouts\Thermal\CriticalTemperature.cs" />
+    <Compile Include="Flight\Readouts\Thermal\HottestSkinTemperature.cs" />
     <Compile Include="Flight\Readouts\Thermal\InternalFlux.cs" />
     <Compile Include="Flight\Readouts\Thermal\RadiationFlux.cs" />
     <Compile Include="Flight\Readouts\Thermal\ConvectionFlux.cs" />
     <Compile Include="Flight\Readouts\Thermal\HottestTemperature.cs" />
     <Compile Include="Flight\Readouts\Thermal\HottestPart.cs" />
     <Compile Include="Flight\Readouts\Thermal\ThermalProcessor.cs" />
+    <Compile Include="Flight\Readouts\Vessel\Name.cs" />
     <Compile Include="Flight\Readouts\Vessel\AttitudeProcessor.cs" />
     <Compile Include="Flight\Readouts\Vessel\DeltaVCurrentTotal.cs" />
     <Compile Include="Flight\Readouts\Vessel\PitchRate.cs" />
@@ -158,7 +171,6 @@
     <Compile Include="Flight\Readouts\Orbital\OrbitalPeriod.cs" />
     <Compile Include="Flight\Readouts\Orbital\OrbitalSpeed.cs" />
     <Compile Include="Flight\Readouts\Orbital\PeriapsisHeight.cs" />
-    <Compile Include="Flight\Readouts\Orbital\SemiMajorAxis.cs" />
     <Compile Include="Flight\Readouts\Orbital\SemiMinorAxis.cs" />
     <Compile Include="Flight\Readouts\Orbital\TimeToApoapsis.cs" />
     <Compile Include="Flight\Readouts\Orbital\TimeToPeriapsis.cs" />
@@ -218,6 +230,8 @@
     <Compile Include="VesselSimulator\SimManager.cs" />
     <Compile Include="VesselSimulator\Simulation.cs" />
     <Compile Include="VesselSimulator\Stage.cs" />
+    <Compile Include="Flight\Readouts\Rendezvous\RelativeRadialVelocity.cs" />
+    <Compile Include="Flight\Readouts\Rendezvous\TimeToRendezvous.cs" />
   </ItemGroup>
   <ItemGroup>
     <Reference Include="Assembly-CSharp">

--- a/KerbalEngineer/LogMsg.cs
+++ b/KerbalEngineer/LogMsg.cs
@@ -15,7 +15,8 @@
 
         public void Flush()
         {
-            MonoBehaviour.print(this.buf);
+            if (this.buf.Length > 0)
+                MonoBehaviour.print(this.buf);
             this.buf.Length = 0;
         }
     }

--- a/KerbalEngineer/Properties/AssemblyInfo.cs
+++ b/KerbalEngineer/Properties/AssemblyInfo.cs
@@ -32,5 +32,5 @@
 // You can specify all the values or you can default the Build and Revision Numbers 
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion(KerbalEngineer.EngineerGlobals.AssemblyVersion)]
+[assembly: AssemblyVersion(KerbalEngineer.EngineerGlobals.ASSEMBLY_VERSION)]
 

--- a/KerbalEngineer/VesselSimulator/EngineSim.cs
+++ b/KerbalEngineer/VesselSimulator/EngineSim.cs
@@ -273,14 +273,36 @@
 
         HashSet<PartSim> visited = new HashSet<PartSim>();
 
+        public void DumpSourcePartSets(String msg)
+        {
+            MonoBehaviour.print("DumpSourcePartSets " + msg);
+            foreach (int type in sourcePartSets.Keys)
+            {
+                MonoBehaviour.print("SourcePartSet for " + ResourceContainer.GetResourceName(type));
+                HashSet<PartSim> sourcePartSet = sourcePartSets[type];
+                if (sourcePartSet.Count > 0)
+                {
+                    foreach (PartSim partSim in sourcePartSet)
+                    {
+                        MonoBehaviour.print("Part " + partSim.name + ":" + partSim.partId);
+                    }
+                }
+                else
+                {
+                    MonoBehaviour.print("No parts");
+                }
+            }
+        }
+
         public bool SetResourceDrains(List<PartSim> allParts, List<PartSim> allFuelLines, HashSet<PartSim> drainingParts)
         {
             LogMsg log = null;
-            
+            //DumpSourcePartSets("before clear");
             foreach (HashSet<PartSim> sourcePartSet in sourcePartSets.Values)
             {
                 sourcePartSet.Clear();
             }
+            //DumpSourcePartSets("after clear");
 
             for (int index = 0; index < this.resourceConsumptions.Types.Count; index++)
             {
@@ -338,20 +360,27 @@
                                 maxStage = stage;
                             }
 
-                            if (!stagePartSets.TryGetValue(stage, out sourcePartSet))
+                            HashSet<PartSim> tempPartSet;
+                            if (!stagePartSets.TryGetValue(stage, out tempPartSet))
                             {
-                                sourcePartSet = new HashSet<PartSim>();
-                                stagePartSets.Add(stage, sourcePartSet);
+                                tempPartSet = new HashSet<PartSim>();
+                                stagePartSets.Add(stage, tempPartSet);
                             }
-                            sourcePartSet.Add(aPartSim);
-                        }
-
-                        for (int j = 0; j <= maxStage; j++)
+                            tempPartSet.Add(aPartSim);
+                        }
+
+                        for (int j = maxStage; j >= 0; j--)
                         {
                             HashSet<PartSim> stagePartSet;
                             if (stagePartSets.TryGetValue(j, out stagePartSet) && stagePartSet.Count > 0)
                             {
-                                sourcePartSet = stagePartSet;
+                                // We have to copy the contents of the set here rather than copying the set reference or 
+                                // bad things (tm) happen
+                                foreach (PartSim aPartSim in stagePartSet)
+                                {
+                                    sourcePartSet.Add(aPartSim);
+                                }
+                                break;
                             }
                         }
                         break;
@@ -376,11 +405,9 @@
                         break;
                 }
 
-
-                if (sourcePartSet.Count > 0)
-                {
-                    sourcePartSets[type] = sourcePartSet;
-                    if (SimManager.logOutput)
+                if (SimManager.logOutput)
+                {
+                    if (sourcePartSet.Count > 0)
                     {
                         log = new LogMsg();
                         log.buf.AppendLine("Source parts for " + ResourceContainer.GetResourceName(type) + ":");
@@ -391,6 +418,8 @@
                         MonoBehaviour.print(log.buf);
                     }
                 }
+
+                //DumpSourcePartSets("after " + ResourceContainer.GetResourceName(type));
             }
             
             // If we don't have sources for all the needed resources then return false without setting up any drains
@@ -409,6 +438,7 @@
                     return false;
                 }
             }
+
             // Now we set the drains on the members of the sets and update the draining parts set
             for (int i = 0; i < this.resourceConsumptions.Types.Count; i++)
             {

--- a/KerbalEngineer/VesselSimulator/PartSim.cs
+++ b/KerbalEngineer/VesselSimulator/PartSim.cs
@@ -43,7 +43,6 @@
         public bool fuelCrossFeed;
         public List<PartSim> fuelTargets = new List<PartSim>();
         public bool hasModuleEngines;
-        public bool hasModuleEnginesFX;
         public bool hasMultiModeEngine;
 
         public bool hasVessel;
@@ -57,8 +56,7 @@
         public bool isNoPhysics;
         public bool isSepratron;
         public bool isFairing;
-        public bool localCorrectThrust;
-        public float moduleMass;
+        public float fairingMass;
         public int stageIndex;
         public String name;
         public String noCrossFeedNodeKey;
@@ -120,6 +118,7 @@
             partSim.isFuelLine = partSim.part.HasModule<CModuleFuelLine>();
             partSim.isFuelTank = partSim.part is FuelTank;
             partSim.isSepratron = partSim.IsSepratron();
+            partSim.isFairing = partSim.IsFairing(partSim.part);
             partSim.inverseStage = partSim.part.inverseStage;
             //MonoBehaviour.print("inverseStage = " + inverseStage);
 
@@ -148,7 +147,10 @@
                 if (log != null) log.buf.AppendLine("Using part.mass of " + partSim.part.mass);
             }
 
-            partSim.moduleMass = partSim.part.GetModuleMass((float)partSim.realMass);
+            if (partSim.isFairing)
+            {
+                partSim.fairingMass = partSim.part.GetModuleMass((float)partSim.realMass);
+            }
 
             for (int i = 0; i < partSim.part.Resources.Count; i++)
             {
@@ -180,10 +182,9 @@
             partSim.initialVesselName = partSim.part.initialVesselName;
 
             partSim.hasMultiModeEngine = partSim.part.HasModule<MultiModeEngine>();
-            partSim.hasModuleEnginesFX = partSim.part.HasModule<ModuleEnginesFX>();
             partSim.hasModuleEngines = partSim.part.HasModule<ModuleEngines>();
 
-            partSim.isEngine = partSim.hasMultiModeEngine || partSim.hasModuleEnginesFX || partSim.hasModuleEngines;
+            partSim.isEngine = partSim.hasMultiModeEngine || partSim.hasModuleEngines;
 
             if (log != null) log.buf.AppendLine("Created " + partSim.name + ". Decoupled in stage " + partSim.decoupledInStage);
 
@@ -208,7 +209,6 @@
 
         public void CreateEngineSims(List<EngineSim> allEngines, double atmosphere, double mach, bool vectoredThrust, bool fullThrust, LogMsg log)
         {
-            bool correctThrust = SimManager.DoesEngineUseCorrectedThrust(part);
             if (log != null)
             {
                 log.buf.AppendLine("CreateEngineSims for " + this.name);
@@ -217,20 +217,18 @@
                     PartModule partMod = this.part.Modules[i];
                     log.buf.AppendLine("Module: " + partMod.moduleName);
                 }
-
-                log.buf.AppendLine("correctThrust = " + correctThrust);
             }
 
             if (hasMultiModeEngine)
             {
-                // A multi-mode engine has multiple ModuleEnginesFX but only one is active at any point
-                // The mode of the engine is the engineID of the ModuleEnginesFX that is active
+                // A multi-mode engine has multiple ModuleEngines but only one is active at any point
+                // The mode of the engine is the engineID of the ModuleEngines that is active
                 string mode = part.GetModule<MultiModeEngine>().mode;
 
-                List<ModuleEnginesFX> engines = part.GetModules<ModuleEnginesFX>();
+                List<ModuleEngines> engines = part.GetModules<ModuleEngines>();
                 for (int i = 0; i < engines.Count; ++i)
                 {
-                    ModuleEnginesFX engine = engines[i];
+                    ModuleEngines engine = engines[i];
                     if (engine.engineID == mode)
                     {
                         if (log != null) log.buf.AppendLine("Module: " + engine.moduleName);
@@ -261,40 +259,37 @@
                     }
                 }
             }
-            else
-            {
-                if (hasModuleEngines)
-                {
-                    List<ModuleEngines> engines = part.GetModules<ModuleEngines>();
-                    for (int i = 0; i < engines.Count; ++i)
-                    {
-                        ModuleEngines engine = engines[i];
-                        if (log != null) log.buf.AppendLine("Module: " + engine.moduleName);
-
-                        Vector3 thrustvec = this.CalculateThrustVector(vectoredThrust ? engine.thrustTransforms : null, log);
-
-                        EngineSim engineSim = EngineSim.New(
-                            this,
-                            atmosphere,
-                            (float)mach,
-                            engine.maxFuelFlow,
-                            engine.minFuelFlow,
-                            engine.thrustPercentage,
-                            thrustvec,
-                            engine.atmosphereCurve,
-                            engine.atmChangeFlow,
-                            engine.useAtmCurve ? engine.atmCurve : null,
-                            engine.useVelCurve ? engine.velCurve : null,
-                            engine.currentThrottle,
-                            engine.g,
-                            engine.throttleLocked || fullThrust,
-                            engine.propellants,
-                            engine.isOperational,
-                            engine.resultingThrust,
-                            engine.thrustTransforms,
-                            log);
-                        allEngines.Add(engineSim);
-                    }
+            else if (hasModuleEngines)
+            {
+                List<ModuleEngines> engines = part.GetModules<ModuleEngines>();
+                for (int i = 0; i < engines.Count; ++i)
+                {
+                    ModuleEngines engine = engines[i];
+                    if (log != null) log.buf.AppendLine("Module: " + engine.moduleName);
+
+                    Vector3 thrustvec = this.CalculateThrustVector(vectoredThrust ? engine.thrustTransforms : null, log);
+
+                    EngineSim engineSim = EngineSim.New(
+                        this,
+                        atmosphere,
+                        (float)mach,
+                        engine.maxFuelFlow,
+                        engine.minFuelFlow,
+                        engine.thrustPercentage,
+                        thrustvec,
+                        engine.atmosphereCurve,
+                        engine.atmChangeFlow,
+                        engine.useAtmCurve ? engine.atmCurve : null,
+                        engine.useVelCurve ? engine.velCurve : null,
+                        engine.currentThrottle,
+                        engine.g,
+                        engine.throttleLocked || fullThrust,
+                        engine.propellants,
+                        engine.isOperational,
+                        engine.resultingThrust,
+                        engine.thrustTransforms,
+                        log);
+                    allEngines.Add(engineSim);
                 }
             }
 
@@ -421,9 +416,13 @@
                 mass += resources.GetResourceMass(resources.Types[i]);
             }
 
-            if (hasVessel == false && isFairing && inverseStage < currentStage)
-            {
-                mass = mass + moduleMass;
+            if (hasVessel == false && isFairing && currentStage > inverseStage)
+            {
+                mass += fairingMass;
+            }
+            else if (hasVessel && isFairing && currentStage <= inverseStage)
+            {
+                mass -= fairingMass;
             }
 
             return mass;

--- a/KerbalEngineer/VesselSimulator/Simulation.cs
+++ b/KerbalEngineer/VesselSimulator/Simulation.cs
@@ -30,6 +30,7 @@
 
 namespace KerbalEngineer.VesselSimulator
 {
+    using System.ComponentModel;
     using CompoundParts;
     using Extensions;
     using Helpers;
@@ -75,7 +76,6 @@
         public String vesselName;
         public VesselType vesselType;
         private WeightedVectorAverager vectorAverager = new WeightedVectorAverager();
-        private static ModuleProceduralFairing moduleProceduralFairing;
 
         public Simulation()
         {
@@ -676,21 +676,28 @@
             for (int i = 0; i < this.allParts.Count; i++)
             {
                 PartSim part = this.allParts[i];
-                // If the part has a parent
-                if (part.parent != null)
-                {
-                    if (part.isNoPhysics)
-                    {
-                        if (part.parent.isNoPhysics && part.parent.parent != null)
-                        {
-                            part.baseMass = 0d;
-                            part.baseMassForCoM = 0d;
-                        }
-                        else
-                        {
-                            part.parent.baseMassForCoM += part.baseMassForCoM;
-                            part.baseMassForCoM = 0d;
-                        }
+
+                // Check if part should pass it's mass onto its parent.
+                if (part.isNoPhysics && part.parent != null)
+                {
+                    PartSim partParent = part.parent;
+
+                    // Loop through all parents until a physically significant parent is found.
+                    while (partParent != null)
+                    {
+                        // Check if parent is physically significant.
+                        if (partParent.isNoPhysics == false)
+                        {
+                            // Apply the mass to the parent and remove it from the originating part.
+                            partParent.baseMassForCoM += part.baseMassForCoM;
+                            part.baseMassForCoM = 0.0;
+
+                            // Break out of the recursive loop.
+                            break;
+                        }
+
+                        // Recursively loop through the parent parts.
+                        partParent = partParent.parent;
                     }
                 }
             }

 Binary files a/Output/KerbalEngineer/KerbalEngineer.dll and b/Output/KerbalEngineer/KerbalEngineer.dll differ
--- a/Output/KerbalEngineer/KerbalEngineer.version
+++ b/Output/KerbalEngineer/KerbalEngineer.version
@@ -1,17 +1,18 @@
 {
-	"NAME":"Kerbal Engineer Redux 1.0",
+	"NAME":"Kerbal Engineer Redux",
 	"URL":"http://ksp-avc.cybutek.net/version.php?id=6",
 	"VERSION":
 	{
 		"MAJOR":1,
 		"MINOR":0,
-		"PATCH":16,
-		"BUILD":6
+		"PATCH":18,
+		"BUILD":0
 	},
 	"KSP_VERSION":
 	{
 		"MAJOR":1,
 		"MINOR":0,
-		"PATCH":2
+		"PATCH":4
 	}
 }
+