Updated Changes.txt file.
Updated Changes.txt file.

--- a/Documents/CHANGES.txt
+++ b/Documents/CHANGES.txt
@@ -1,3 +1,36 @@
+1.0.17.0
+    Added: 'Mach Number' readout under the 'Surface' category and included it on the default surface HUD.
+    Added: Stock sections in the Flight Engineer can now become HUDs.
+    Added 'Thermal' readouts category including:
+        Internal Flux
+        Convection Flux
+        Radiation Flux
+        Critical Part Name
+        Critical Part Temperature
+        Critical Part Skin Temperature
+        Critical Part Thermal Percentage of Max Temperature
+        Hottest Part Name
+        Hottest Part Temperature
+        Hottest Part Skin Temperature
+        Coldest Part Name
+        Coldest Part Temperature
+        Coldest Part Skin Temperature
+
+    Changed: Mach on the Build Engineer now accurate to 2 decimal places.
+    Changed: Max mach in the Build Engineer defaults to 1.00 even when no jet engines are present.
+    Changed: Increased eccentricity readout to 5 decimal places.  
+    Changed: Implemented Sarbian's object pooling. 
+    Changed: The default selected body is now assigned via 'Planitarium.Home'.
+    Changed: HUDs to clamp fully inside the screen instead of allowing them to run off the edge by a certain amount.
+    Fixed: Physically insignificant part mass is now associated with the parent part.
+    Fixed: Longitude and Latitude readouts now use a KER formatter instead of Squad's incorrect implementation.
+    Fixed: Possible null reference in the Rendezvous Processor.
+    Fixed: Fairing mass issues introduced with regards to simulation changes.
+    Fixed: Use of per-propellant fuel flow mode override.
+    Fixed: Burn times calculated for jet engines.
+    Fixed: Thrust issues introduced with Sarbian's simulation alterations.
+    Fixed: Issue where HUDs positioned close to the top/bottom of the screen could be pushed out of position.
+
 1.0.16.6, 02-05-15
     Fixed: Separately staged fairing mass jettisons are now calculated in the editor.
 

--- a/KerbalEngineer/CelestialBodies.cs
+++ b/KerbalEngineer/CelestialBodies.cs
@@ -37,7 +37,8 @@
             try
             {
                 SystemBody = new BodyInfo(PSystemManager.Instance.localBodies.Find(b => b.referenceBody == null || b.referenceBody == b));
-                if (!SetSelectedBody("Kerbin"))
+                String homeCBName = Planetarium.fetch.Home.bodyName;
+                if (!SetSelectedBody(homeCBName))
                 {
                     SelectedBody = SystemBody;
                     SelectedBody.SetSelected(true);

--- a/KerbalEngineer/Control/ControlCentre.cs
+++ b/KerbalEngineer/Control/ControlCentre.cs
@@ -142,7 +142,7 @@
             try
             {
                 GUI.skin = null;
-                this.position = GUILayout.Window(this.GetInstanceID(), this.position, this.Window, "KERBAL ENGINEER REDUX " + EngineerGlobals.AssemblyVersion + " - CONTROL CENTRE", HighLogic.Skin.window);
+                this.position = GUILayout.Window(this.GetInstanceID(), this.position, this.Window, "KERBAL ENGINEER REDUX " + EngineerGlobals.ASSEMBLY_VERSION + " - CONTROL CENTRE", HighLogic.Skin.window);
                 this.CentreWindow();
             }
             catch (Exception ex)

--- a/KerbalEngineer/Editor/BuildAdvanced.cs
+++ b/KerbalEngineer/Editor/BuildAdvanced.cs
@@ -215,7 +215,7 @@
                 }
 
                 // Change the window title based on whether in compact mode or not.
-                title = !compactMode ? "KERBAL ENGINEER REDUX " + EngineerGlobals.AssemblyVersion : "K.E.R. " + EngineerGlobals.AssemblyVersion + (showAtmosphericDetails ? " (ATMOS.)" : String.Empty);
+                title = !compactMode ? "KERBAL ENGINEER REDUX " + EngineerGlobals.ASSEMBLY_VERSION : "K.E.R. " + EngineerGlobals.ASSEMBLY_VERSION;
 
                 // Reset the window size when the staging or something else has changed.
                 stagesLength = stages.Length;
@@ -354,7 +354,7 @@
                 GUILayout.Space(5.0f);
 
                 GUILayout.BeginVertical();
-                GUILayout.Label("Mach: " + atmosphericMach.ToString("F1"), settingAtmoStyle, GUILayout.Width(125.0f * GuiDisplaySize.Offset));
+                GUILayout.Label("Mach: " + atmosphericMach.ToString("F2"), settingAtmoStyle, GUILayout.Width(125.0f * GuiDisplaySize.Offset));
                 GUI.skin = HighLogic.Skin;
                 atmosphericMach = GUILayout.HorizontalSlider(Mathf.Clamp(atmosphericMach, 0.0f, maxMach), 0.0f, maxMach);
                 GUI.skin = null;
@@ -525,6 +525,11 @@
             GUILayout.BeginHorizontal();
             GUILayout.Label("Simulate using vectored thrust values:");
             SimManager.vectoredThrust = GUILayout.Toggle(SimManager.vectoredThrust, "ENABLED", buttonStyle, GUILayout.Width(100.0f * GuiDisplaySize.Offset));
+            GUILayout.EndHorizontal();
+
+            GUILayout.BeginHorizontal();
+            GUILayout.Label("Verbose Simulation Log:");
+            SimManager.logOutput = GUILayout.Toggle(SimManager.logOutput, "ENABLED", buttonStyle, GUILayout.Width(100.0f * GuiDisplaySize.Offset));
             GUILayout.EndHorizontal();
 
             GUILayout.BeginHorizontal();
@@ -823,6 +828,14 @@
                     bodiesListPosition = new Rect(position.width - 452.0f * GuiDisplaySize.Offset, 5.0f, 125.0f * GuiDisplaySize.Offset, 20.0f);
                     bodiesList.enabled = GUI.Toggle(bodiesListPosition, bodiesList.enabled, "BODY: " + CelestialBodies.SelectedBody.Name.ToUpper(), buttonStyle);
                     bodiesList.SetPosition(bodiesListPosition.Translate(position));
+                }
+                else
+                {
+                    if (GUI.Toggle(new Rect(position.width - 133.0f * GuiDisplaySize.Offset, 5.0f, 60.0f * GuiDisplaySize.Offset, 20.0f), showAtmosphericDetails, "ATMO", buttonStyle) != showAtmosphericDetails)
+                    {
+                        hasChanged = true;
+                        showAtmosphericDetails = !showAtmosphericDetails;
+                    }
                 }
 
                 // Draw the main informational display box.
@@ -841,7 +854,7 @@
                     DrawBurnTime();
                     GUILayout.EndHorizontal();
 
-                    if (showAtmosphericDetails)
+                    if (showAtmosphericDetails && !compactMode)
                     {
                         GUILayout.BeginVertical(areaSettingStyle);
                         DrawAtmosphericDetails();

--- a/KerbalEngineer/EngineerGlobals.cs
+++ b/KerbalEngineer/EngineerGlobals.cs
@@ -1,7 +1,5 @@
 // 
-//     Kerbal Engineer Redux
-// 
-//     Copyright (C) 2014 CYBUTEK
+//     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
 //     it under the terms of the GNU General Public License as published by
@@ -17,42 +15,31 @@
 //     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // 
 
-#region Using Directives
-
-using System.IO;
-using System.Reflection;
-
-#endregion
-
 namespace KerbalEngineer
 {
-    public class EngineerGlobals
+    using System.IO;
+    using System.Reflection;
+
+    public static class EngineerGlobals
     {
-        #region Constants
-
         /// <summary>
         ///     Current version of the Kerbal Engineer assembly.
         /// </summary>
-        public const string AssemblyVersion = "1.0.16.6";
-
-        #endregion
-
-        #region Fields
+        public const string ASSEMBLY_VERSION = "1.0.17.0";
 
         private static string assemblyFile;
         private static string assemblyName;
         private static string assemblyPath;
-
-        #endregion
-
-        #region Properties
 
         /// <summary>
         ///     Gets the Kerbal Engineer assembly's path including the file name.
         /// </summary>
         public static string AssemblyFile
         {
-            get { return assemblyFile ?? (assemblyFile = Assembly.GetExecutingAssembly().Location); }
+            get
+            {
+                return assemblyFile ?? (assemblyFile = Assembly.GetExecutingAssembly().Location);
+            }
         }
 
         /// <summary>
@@ -60,7 +47,10 @@
         /// </summary>
         public static string AssemblyName
         {
-            get { return assemblyName ?? (assemblyName = new FileInfo(AssemblyFile).Name); }
+            get
+            {
+                return assemblyName ?? (assemblyName = new FileInfo(AssemblyFile).Name);
+            }
         }
 
         /// <summary>
@@ -68,9 +58,10 @@
         /// </summary>
         public static string AssemblyPath
         {
-            get { return assemblyPath ?? (assemblyPath = AssemblyFile.Replace(new FileInfo(AssemblyFile).Name, "")); }
+            get
+            {
+                return assemblyPath ?? (assemblyPath = AssemblyFile.Replace(new FileInfo(AssemblyFile).Name, ""));
+            }
         }
-
-        #endregion
     }
 }

--- a/KerbalEngineer/Extensions/DoubleExtensions.cs
+++ b/KerbalEngineer/Extensions/DoubleExtensions.cs
@@ -1,7 +1,7 @@
 // 
 //     Kerbal Engineer Redux
 // 
-//     Copyright (C) 2014 CYBUTEK
+//     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
 //     it under the terms of the GNU General Public License as published by
@@ -17,18 +17,12 @@
 //     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // 
 
-#region Using Directives
-
-using KerbalEngineer.Helpers;
-
-#endregion
-
 namespace KerbalEngineer.Extensions
 {
+    using Helpers;
+
     public static class DoubleExtensions
     {
-        #region Methods: public
-
         public static double Clamp(this double value, double lower, double higher)
         {
             return value < lower ? lower : value > higher ? higher : value;
@@ -49,14 +43,19 @@
             return Units.ToDistance(value);
         }
 
-        public static string ToTorque(this double value)
+        public static string ToFlux(this double value)
         {
-            return Units.ToTorque(value);
+            return Units.ToFlux(value);
         }
 
         public static string ToForce(this double value)
         {
             return Units.ToForce(value);
+        }
+
+        public static string ToMach(this double value)
+        {
+            return Units.ToMach(value);
         }
 
         public static string ToMass(this double value)
@@ -79,6 +78,14 @@
             return Units.ToSpeed(value);
         }
 
-        #endregion
+        public static string ToTemperature(this double value)
+        {
+            return Units.ToTemperature(value);
+        }
+
+        public static string ToTorque(this double value)
+        {
+            return Units.ToTorque(value);
+        }
     }
 }

--- a/KerbalEngineer/Extensions/FloatExtensions.cs
+++ b/KerbalEngineer/Extensions/FloatExtensions.cs
@@ -1,7 +1,7 @@
 // 
 //     Kerbal Engineer Redux
 // 
-//     Copyright (C) 2014 CYBUTEK
+//     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
 //     it under the terms of the GNU General Public License as published by
@@ -17,18 +17,12 @@
 //     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // 
 
-#region Using Directives
-
-using KerbalEngineer.Helpers;
-
-#endregion
-
 namespace KerbalEngineer.Extensions
 {
+    using Helpers;
+
     public static class FloatExtensions
     {
-        #region Methods: public
-
         public static string ToAcceleration(this float value)
         {
             return Units.ToAcceleration(value);
@@ -44,14 +38,19 @@
             return Units.ToDistance(value);
         }
 
+        public static string ToFlux(this float value)
+        {
+            return Units.ToFlux(value);
+        }
+
         public static string ToForce(this float value)
         {
             return Units.ToForce(value);
         }
 
-        public static string ToTorque(this float value)
+        public static string ToMach(this float value)
         {
-            return Units.ToTorque(value);
+            return Units.ToMach(value);
         }
 
         public static string ToMass(this float value)
@@ -74,6 +73,14 @@
             return Units.ToSpeed(value);
         }
 
-        #endregion
+        public static string ToTemperature(this float value)
+        {
+            return Units.ToTemperature(value);
+        }
+
+        public static string ToTorque(this float value)
+        {
+            return Units.ToTorque(value);
+        }
     }
 }

--- a/KerbalEngineer/Extensions/PartExtensions.cs
+++ b/KerbalEngineer/Extensions/PartExtensions.cs
@@ -55,6 +55,7 @@
         /// <summary>
         ///     Gets whether the part has fuel.
         /// </summary>
+        /* not used
         public static bool EngineHasFuel(this Part part)
         {
             PartModule cachePartModule = GetModule<ModuleEngines>(part);
@@ -71,7 +72,7 @@
 
             return false;
         }
-
+        */
         /// <summary>
         ///     Gets the cost of the part excluding resources.
         /// </summary>
@@ -123,6 +124,7 @@
         /// <summary>
         ///     Gets the maximum thrust of the part if it's an engine.
         /// </summary>
+        /* not used
         public static double GetMaxThrust(this Part part)
         {
             PartModule cachePartModule = GetModule<ModuleEngines>(part);
@@ -139,6 +141,7 @@
 
             return 0.0;
         }
+        */
 
         /// <summary>
         ///     Gets the first typed PartModule in the part's module list.
@@ -194,10 +197,10 @@
             return GetModule<ModuleEngines>(part);
         }
 
-        public static ModuleEnginesFX GetModuleEnginesFx(this Part part)
+/*        public static ModuleEnginesFX GetModuleEnginesFx(this Part part)
         {
             return GetModule<ModuleEnginesFX>(part);
-        }
+        }*/
 
         /// <summary>
         ///     Gets a ModuleGenerator typed PartModule.
@@ -218,16 +221,20 @@
         /// <summary>
         ///     Gets the current selected ModuleEnginesFX.
         /// </summary>
-        public static ModuleEnginesFX GetModuleMultiModeEngine(this Part part)
-        {
-            ModuleEnginesFX moduleEngineFx;
-            string mode = GetModule<MultiModeEngine>(part).mode;
-            for (int i = 0; i < part.Modules.Count; ++i)
-            {
-                moduleEngineFx = part.Modules[i] as ModuleEnginesFX;
-                if (moduleEngineFx != null && moduleEngineFx.engineID == mode)
-                {
-                    return moduleEngineFx;
+        public static ModuleEngines GetModuleMultiModeEngine(this Part part)
+        {
+            ModuleEngines moduleEngines;
+            MultiModeEngine multiMod = GetModule<MultiModeEngine>(part);
+            if (multiMod != null)
+            {
+                string mode = multiMod.mode;
+                for (int i = 0; i < part.Modules.Count; ++i)
+                {
+                    moduleEngines = part.Modules[i] as ModuleEngines;
+                    if (moduleEngines != null && moduleEngines.engineID == mode)
+                    {
+                        return moduleEngines;
+                    }
                 }
             }
             return null;
@@ -343,6 +350,7 @@
         /// <summary>
         ///     Gets the current specific impulse for the engine.
         /// </summary>
+        /* not used
         public static double GetSpecificImpulse(this Part part, float atmosphere)
         {
             PartModule cachePartModule = GetModule<ModuleEngines>(part);
@@ -359,6 +367,7 @@
 
             return 0.0;
         }
+        */
 
         /// <summary>
         ///     Gets the total mass of the part including resources.
@@ -457,7 +466,7 @@
         /// </summary>
         public static bool IsEngine(this Part part)
         {
-            return HasModule<ModuleEngines>(part) || HasModule<ModuleEnginesFX>(part);
+            return HasModule<ModuleEngines>(part);
         }
 
         /// <summary>
@@ -540,7 +549,7 @@
         /// </summary>
         public static bool IsSolidRocket(this Part part)
         {
-            return (part.HasModule<ModuleEngines>() && part.GetModuleEngines().throttleLocked) || (part.HasModule<ModuleEnginesFX>() && part.GetModuleEnginesFx().throttleLocked);
+            return (part.HasModule<ModuleEngines>() && part.GetModuleEngines().throttleLocked);
         }
 
         public class ProtoModuleDecoupler
@@ -588,6 +597,12 @@
             }
         }
 
+        // This needs updating to handle multi-mode engines and engines with multiple ModuleEngines correctly.
+        // It currently just shows the stats of the currently active module for multi-mode engines and just 
+        // the first ModuleEngines for engines with multiple modules.
+        // It should really show all the modes for multi-mode engines as separate sections.
+        // For other engines with multiple ModuleEngines it should combine the separate modules into a single set of data
+        // The constructor should be changed to take the Part itself.  It can be called if HasModule<ModuleEngines>() is true.
         public class ProtoModuleEngine
         {
             private readonly PartModule module;
@@ -627,19 +642,6 @@
                 MinimumThrust = engine.minThrust;
                 Propellants = engine.propellants;
             }
-
-            private void SetModuleEnginesFx()
-            {
-                ModuleEnginesFX engine = module as ModuleEnginesFX;
-                if (engine == null)
-                {
-                    return;
-                }
-
-                MaximumThrust = engine.maxThrust * (engine.thrustPercentage * 0.01);
-                MinimumThrust = engine.minThrust;
-                Propellants = engine.propellants;
-            }
         }
     }
 }

--- /dev/null
+++ b/KerbalEngineer/Extensions/StringExtensions.cs
@@ -1,1 +1,33 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Extensions
+{
+    public static class StringExtensions
+    {
+        public static string ToLength(this string value, int length)
+        {
+            if (value != null && value.Length > length)
+            {
+                value = value.Substring(0, length) + "...";
+            }
+            return value;
+        }
+    }
+}

--- a/KerbalEngineer/Flight/DisplayStack.cs
+++ b/KerbalEngineer/Flight/DisplayStack.cs
@@ -214,7 +214,7 @@
         /// </summary>
         private void DrawControlBar()
         {
-            GUILayout.Label("FLIGHT ENGINEER " + EngineerGlobals.AssemblyVersion, this.titleStyle);
+            GUILayout.Label("FLIGHT ENGINEER " + EngineerGlobals.ASSEMBLY_VERSION, this.titleStyle);
 
             this.DrawControlBarButtons(SectionLibrary.StockSections);
             this.DrawControlBarButtons(SectionLibrary.CustomSections);

--- a/KerbalEngineer/Flight/Readouts/Orbital/Eccentricity.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/Eccentricity.cs
@@ -43,7 +43,7 @@
 
         public override void Draw(SectionModule section)
         {
-            this.DrawLine(FlightGlobals.ship_orbit.eccentricity.ToString("F3"), section.IsHud);
+            this.DrawLine(FlightGlobals.ship_orbit.eccentricity.ToString("F5"), section.IsHud);
         }
 
         #endregion

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/ManoeuvreProcessor.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/ManoeuvreProcessor.cs
@@ -30,6 +30,8 @@
 
 namespace KerbalEngineer.Flight.Readouts.Orbital.ManoeuvreNode
 {
+    using Helpers;
+
     public class ManoeuvreProcessor : IUpdatable, IUpdateRequest
     {
         #region Fields
@@ -163,7 +165,7 @@
                     deltaVDrain = deltaV.Clamp(0.0, stageDeltaV);
                 }
 
-                var exhaustVelocity = stage.isp * 9.82;
+                var exhaustVelocity = stage.isp * Units.GRAVITY;
                 var flowRate = stage.thrust / exhaustVelocity;
                 var endMass = Math.Exp(Math.Log(startMass) - deltaVDrain / exhaustVelocity);
                 var deltaMass = (startMass - endMass) * Math.Exp(-(deltaVDrain * 0.001) / exhaustVelocity);

--- a/KerbalEngineer/Flight/Readouts/ReadoutLibrary.cs
+++ b/KerbalEngineer/Flight/Readouts/ReadoutLibrary.cs
@@ -1,7 +1,5 @@
 // 
-//     Kerbal Engineer Redux
-// 
-//     Copyright (C) 2014 CYBUTEK
+//     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
 //     it under the terms of the GNU General Public License as published by
@@ -19,8 +17,6 @@
 
 namespace KerbalEngineer.Flight.Readouts
 {
-    #region Using Directives
-
     using System;
     using System.Collections.Generic;
     using System.Linq;
@@ -30,6 +26,7 @@
     using Rendezvous;
     using Settings;
     using Surface;
+    using Thermal;
     using Vessel;
     using AltitudeSeaLevel = Surface.AltitudeSeaLevel;
     using ApoapsisHeight = Orbital.ApoapsisHeight;
@@ -40,17 +37,9 @@
     using TimeToApoapsis = Orbital.TimeToApoapsis;
     using TimeToPeriapsis = Orbital.TimeToPeriapsis;
 
-    #endregion
-
     public static class ReadoutLibrary
     {
-        #region Fields
-
         private static List<ReadoutModule> readouts = new List<ReadoutModule>();
-
-        #endregion
-
-        #region Constructors
 
         /// <summary>
         ///     Sets up and populates the readout library with the stock readouts.
@@ -63,6 +52,7 @@
                 ReadoutCategory.SetCategory("Surface", "Surface and atmospheric readouts.");
                 ReadoutCategory.SetCategory("Vessel", "Vessel performance statistics.");
                 ReadoutCategory.SetCategory("Rendezvous", "Readouts for rendezvous manovoeures.");
+                ReadoutCategory.SetCategory("Thermal", "Thermal characteristics readouts.");
                 ReadoutCategory.SetCategory("Miscellaneous", "Miscellaneous readouts.");
                 ReadoutCategory.Selected = ReadoutCategory.GetCategory("Orbital");
 
@@ -109,6 +99,7 @@
                 readouts.Add(new VerticalAcceleration());
                 readouts.Add(new HorizontalSpeed());
                 readouts.Add(new HorizontalAcceleration());
+                readouts.Add(new MachNumber());
                 readouts.Add(new Latitude());
                 readouts.Add(new Longitude());
                 readouts.Add(new GeeForce());
@@ -171,7 +162,22 @@
                 readouts.Add(new Rendezvous.OrbitalPeriod());
                 readouts.Add(new Rendezvous.SemiMajorAxis());
                 readouts.Add(new Rendezvous.SemiMinorAxis());
-                
+
+                // Thermal
+                readouts.Add(new InternalFlux());
+                readouts.Add(new ConvectionFlux());
+                readouts.Add(new RadiationFlux());
+                readouts.Add(new CriticalPart());
+                readouts.Add(new CriticalTemperature());
+                readouts.Add(new CriticalSkinTemperature());
+                readouts.Add(new CriticalThermalPercentage());
+                readouts.Add(new HottestPart());
+                readouts.Add(new HottestTemperature());
+                readouts.Add(new HottestSkinTemperature());
+                readouts.Add(new CoolestPart());
+                readouts.Add(new CoolestTemperature());
+                readouts.Add(new CoolestSkinTemperature());
+
                 // Misc
                 readouts.Add(new Separator());
                 readouts.Add(new GuiSizeAdjustor());
@@ -188,22 +194,20 @@
             }
         }
 
-        #endregion
-
-        #region Properties
-
         /// <summary>
         ///     Gets and sets the available readout modules.
         /// </summary>
         public static List<ReadoutModule> Readouts
         {
-            get { return readouts; }
-            set { readouts = value; }
-        }
-
-        #endregion
-
-        #region Methods
+            get
+            {
+                return readouts;
+            }
+            set
+            {
+                readouts = value;
+            }
+        }
 
         /// <summary>
         ///     Gets a list of readout modules which are associated with the specified category.
@@ -226,7 +230,7 @@
         /// </summary>
         public static void Reset()
         {
-            foreach (var readout in readouts)
+            foreach (ReadoutModule readout in readouts)
             {
                 readout.Reset();
             }
@@ -239,8 +243,8 @@
         {
             try
             {
-                var handler = SettingHandler.Load("HelpStrings.xml");
-                foreach (var readout in readouts)
+                SettingHandler handler = SettingHandler.Load("HelpStrings.xml");
+                foreach (ReadoutModule readout in readouts)
                 {
                     readout.HelpString = handler.GetSet(readout.Category + "." + readout.GetType().Name, readout.HelpString);
                 }
@@ -251,7 +255,5 @@
                 Logger.Exception(ex);
             }
         }
-
-        #endregion
     }
 }

--- a/KerbalEngineer/Flight/Readouts/ReadoutModule.cs
+++ b/KerbalEngineer/Flight/Readouts/ReadoutModule.cs
@@ -29,6 +29,8 @@
 
 namespace KerbalEngineer.Flight.Readouts
 {
+    using Extensions;
+
     public abstract class ReadoutModule
     {
         #region Fields
@@ -178,13 +180,13 @@
             {
                 GUILayout.Label(this.Name, this.NameStyle);
                 GUILayout.FlexibleSpace();
-                GUILayout.Label(value, this.ValueStyle);
+                GUILayout.Label(value.ToLength(20), this.ValueStyle);
             }
             else
             {
                 GUILayout.Label(this.Name, this.NameStyle, GUILayout.Height(this.NameStyle.fontSize * 1.2f));
                 GUILayout.FlexibleSpace();
-                GUILayout.Label(value, this.ValueStyle, GUILayout.Height(this.ValueStyle.fontSize * 1.2f));
+                GUILayout.Label(value.ToLength(20), this.ValueStyle, GUILayout.Height(this.ValueStyle.fontSize * 1.2f));
             }
             GUILayout.EndHorizontal();
 
@@ -198,13 +200,13 @@
             {
                 GUILayout.Label(name, this.NameStyle);
                 GUILayout.FlexibleSpace();
-                GUILayout.Label(value, this.ValueStyle);
+                GUILayout.Label(value.ToLength(20), this.ValueStyle);
             }
             else
             {
                 GUILayout.Label(name, this.NameStyle, GUILayout.Height(this.NameStyle.fontSize * 1.2f));
                 GUILayout.FlexibleSpace();
-                GUILayout.Label(value, this.ValueStyle, GUILayout.Height(this.ValueStyle.fontSize * 1.2f));
+                GUILayout.Label(value.ToLength(20), this.ValueStyle, GUILayout.Height(this.ValueStyle.fontSize * 1.2f));
             }
             GUILayout.EndHorizontal();
 

--- a/KerbalEngineer/Flight/Readouts/Rendezvous/RendezvousProcessor.cs
+++ b/KerbalEngineer/Flight/Readouts/Rendezvous/RendezvousProcessor.cs
@@ -1,7 +1,7 @@
 // 
 //     Kerbal Engineer Redux
 // 
-//     Copyright (C) 2014 CYBUTEK
+//     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
 //     it under the terms of the GNU General Public License as published by
@@ -17,30 +17,19 @@
 //     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // 
 
-#region Using Directives
-
-using System;
-
-using KerbalEngineer.Extensions;
-using KerbalEngineer.Helpers;
-
-#endregion
-
 namespace KerbalEngineer.Flight.Readouts.Rendezvous
 {
+    using System;
+    using Extensions;
+    using Helpers;
+
     public class RendezvousProcessor : IUpdatable, IUpdateRequest
     {
-        #region Fields
-
         private static readonly RendezvousProcessor instance = new RendezvousProcessor();
 
         private Orbit originOrbit;
         private Orbit targetOrbit;
 
-        #endregion
-
-        #region Properties
-
         /// <summary>
         ///     Gets the target's altitude above its reference body.
         /// </summary>
@@ -71,7 +60,10 @@
         /// </summary>
         public static RendezvousProcessor Instance
         {
-            get { return instance; }
+            get
+            {
+                return instance;
+            }
         }
 
         /// <summary>
@@ -149,10 +141,6 @@
         /// </summary>
         public bool UpdateRequested { get; set; }
 
-        #endregion
-
-        #region Methods: public
-
         /// <summary>
         ///     Request and update to calculate the details.
         /// </summary>
@@ -166,7 +154,13 @@
         /// </summary>
         public void Update()
         {
-            if (FlightGlobals.fetch.VesselTarget == null)
+            if (FlightGlobals.fetch == null ||
+                FlightGlobals.fetch.VesselTarget == null ||
+                FlightGlobals.ActiveVessel == null ||
+                FlightGlobals.ActiveVessel.targetObject == null ||
+                FlightGlobals.ActiveVessel.targetObject.GetOrbit() == null ||
+                FlightGlobals.ship_orbit == null ||
+                FlightGlobals.ship_orbit.referenceBody == null)
             {
                 ShowDetails = false;
                 return;
@@ -174,55 +168,50 @@
 
             ShowDetails = true;
 
-            this.targetOrbit = FlightGlobals.fetch.VesselTarget.GetOrbit();
-            this.originOrbit = (FlightGlobals.ship_orbit.referenceBody == Planetarium.fetch.Sun || FlightGlobals.ship_orbit.referenceBody == FlightGlobals.ActiveVessel.targetObject.GetOrbit().referenceBody)
+            targetOrbit = FlightGlobals.fetch.VesselTarget.GetOrbit();
+            originOrbit = (FlightGlobals.ship_orbit.referenceBody == Planetarium.fetch.Sun ||
+                           FlightGlobals.ship_orbit.referenceBody == FlightGlobals.ActiveVessel.targetObject.GetOrbit().referenceBody)
                 ? FlightGlobals.ship_orbit
                 : FlightGlobals.ship_orbit.referenceBody.orbit;
 
-            RelativeInclination = this.originOrbit.GetRelativeInclination(this.targetOrbit);
+            RelativeInclination = originOrbit.GetRelativeInclination(targetOrbit);
             RelativeVelocity = FlightGlobals.ship_tgtSpeed;
-            RelativeSpeed = FlightGlobals.ship_obtSpeed - this.targetOrbit.orbitalSpeed;
-            PhaseAngle = this.originOrbit.GetPhaseAngle(this.targetOrbit);
-            InterceptAngle = this.CalcInterceptAngle();
-            TimeToAscendingNode = this.originOrbit.GetTimeToVector(this.GetAscendingNode());
-            TimeToDescendingNode = this.originOrbit.GetTimeToVector(this.GetDescendingNode());
-            AngleToAscendingNode = this.originOrbit.GetAngleToVector(this.GetAscendingNode());
-            AngleToDescendingNode = this.originOrbit.GetAngleToVector(this.GetDescendingNode());
-            AltitudeSeaLevel = this.targetOrbit.altitude;
-            ApoapsisHeight = this.targetOrbit.ApA;
-            PeriapsisHeight = this.targetOrbit.PeA;
-            TimeToApoapsis = this.targetOrbit.timeToAp;
-            TimeToPeriapsis = this.targetOrbit.timeToPe;
-            SemiMajorAxis = this.targetOrbit.semiMajorAxis;
-            SemiMinorAxis = this.targetOrbit.semiMinorAxis;
-
-            Distance = Vector3d.Distance(this.targetOrbit.pos, this.originOrbit.pos);
-            OrbitalPeriod = this.targetOrbit.period;
-        }
-
-        #endregion
-
-        #region Methods: private
+            RelativeSpeed = FlightGlobals.ship_obtSpeed - targetOrbit.orbitalSpeed;
+            PhaseAngle = originOrbit.GetPhaseAngle(targetOrbit);
+            InterceptAngle = CalcInterceptAngle();
+            TimeToAscendingNode = originOrbit.GetTimeToVector(GetAscendingNode());
+            TimeToDescendingNode = originOrbit.GetTimeToVector(GetDescendingNode());
+            AngleToAscendingNode = originOrbit.GetAngleToVector(GetAscendingNode());
+            AngleToDescendingNode = originOrbit.GetAngleToVector(GetDescendingNode());
+            AltitudeSeaLevel = targetOrbit.altitude;
+            ApoapsisHeight = targetOrbit.ApA;
+            PeriapsisHeight = targetOrbit.PeA;
+            TimeToApoapsis = targetOrbit.timeToAp;
+            TimeToPeriapsis = targetOrbit.timeToPe;
+            SemiMajorAxis = targetOrbit.semiMajorAxis;
+            SemiMinorAxis = targetOrbit.semiMinorAxis;
+
+            Distance = Vector3d.Distance(targetOrbit.pos, originOrbit.pos);
+            OrbitalPeriod = targetOrbit.period;
+        }
 
         private double CalcInterceptAngle()
         {
-            var originRadius = (this.originOrbit.semiMinorAxis + this.originOrbit.semiMajorAxis) * 0.5;
-            var targetRadius = (this.targetOrbit.semiMinorAxis + this.targetOrbit.semiMajorAxis) * 0.5;
-            var angle = 180.0 * (1.0 - Math.Pow((originRadius + targetRadius) / (2.0 * targetRadius), 1.5));
+            double originRadius = (originOrbit.semiMinorAxis + originOrbit.semiMajorAxis) * 0.5;
+            double targetRadius = (targetOrbit.semiMinorAxis + targetOrbit.semiMajorAxis) * 0.5;
+            double angle = 180.0 * (1.0 - Math.Pow((originRadius + targetRadius) / (2.0 * targetRadius), 1.5));
             angle = PhaseAngle - angle;
             return RelativeInclination < 90.0 ? AngleHelper.Clamp360(angle) : AngleHelper.Clamp360(360.0 - (180.0 - angle));
         }
 
         private Vector3d GetAscendingNode()
         {
-            return Vector3d.Cross(this.targetOrbit.GetOrbitNormal(), this.originOrbit.GetOrbitNormal());
+            return Vector3d.Cross(targetOrbit.GetOrbitNormal(), originOrbit.GetOrbitNormal());
         }
 
         private Vector3d GetDescendingNode()
         {
-            return Vector3d.Cross(this.originOrbit.GetOrbitNormal(), this.targetOrbit.GetOrbitNormal());
-        }
-
-        #endregion
+            return Vector3d.Cross(originOrbit.GetOrbitNormal(), targetOrbit.GetOrbitNormal());
+        }
     }
 }

--- a/KerbalEngineer/Flight/Readouts/Surface/AtmosphericEfficiency.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/AtmosphericEfficiency.cs
@@ -1,7 +1,7 @@
 // 
 //     Kerbal Engineer Redux
 // 
-//     Copyright (C) 2014 CYBUTEK
+//     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
 //     it under the terms of the GNU General Public License as published by
@@ -17,36 +17,26 @@
 //     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // 
 
-#region Using Directives
-
-using KerbalEngineer.Extensions;
-using KerbalEngineer.Flight.Sections;
-
-#endregion
-
 namespace KerbalEngineer.Flight.Readouts.Surface
 {
+    using Extensions;
+    using Sections;
+
     public class AtmosphericEfficiency : ReadoutModule
     {
-        #region Constructors
-
         public AtmosphericEfficiency()
         {
-            this.Name = "Atmos. Efficiency";
-            this.Category = ReadoutCategory.GetCategory("Surface");
-            this.HelpString = "Shows you vessel's efficiency as a ratio of the current velocity and terminal velocity.  Less than 1 means that you are losing efficiency due to gravity and greater than 1 is due to drag.";
-            this.IsDefault = true;
+            Name = "Atmos. Efficiency";
+            Category = ReadoutCategory.GetCategory("Surface");
+            HelpString = "Shows you vessel's efficiency as a ratio of the current velocity and terminal velocity.  Less than 100% means that you are losing efficiency due to gravity and greater than 100% is due to drag.";
+            IsDefault = false;
         }
-
-        #endregion
-
-        #region Methods: public
 
         public override void Draw(SectionModule section)
         {
             if (AtmosphericProcessor.ShowDetails)
             {
-                this.DrawLine(AtmosphericProcessor.Efficiency.ToPercent(), section.IsHud);
+                DrawLine(AtmosphericProcessor.Efficiency.ToPercent(), section.IsHud);
             }
         }
 
@@ -59,7 +49,5 @@
         {
             AtmosphericProcessor.RequestUpdate();
         }
-
-        #endregion
     }
 }

--- a/KerbalEngineer/Flight/Readouts/Surface/Latitude.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/Latitude.cs
@@ -20,6 +20,7 @@
 #region Using Directives
 
 using KerbalEngineer.Flight.Sections;
+using KerbalEngineer.Helpers;
 
 #endregion
 
@@ -43,7 +44,7 @@
 
         public override void Draw(SectionModule section)
         {
-            this.DrawLine(KSPUtil.PrintLatitude(FlightGlobals.ship_latitude), section.IsHud);
+            this.DrawLine(Units.ToAngleDMS(FlightGlobals.ship_latitude) + (FlightGlobals.ship_latitude < 0 ? " S" : " N"), section.IsHud);
         }
 
         #endregion

--- a/KerbalEngineer/Flight/Readouts/Surface/Longitude.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/Longitude.cs
@@ -17,35 +17,25 @@
 //     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // 
 
-#region Using Directives
-
-using KerbalEngineer.Flight.Sections;
-
-#endregion
-
 namespace KerbalEngineer.Flight.Readouts.Surface
 {
+    using Helpers;
+    using Sections;
+
     public class Longitude : ReadoutModule
     {
-        #region Constructors
-
         public Longitude()
         {
-            this.Name = "Longitude";
-            this.Category = ReadoutCategory.GetCategory("Surface");
-            this.HelpString = "Shows the vessel's longitude around a celestial body.  Longitude is the angle from the bodies prime meridian.";
-            this.IsDefault = true;
+            Name = "Longitude";
+            Category = ReadoutCategory.GetCategory("Surface");
+            HelpString = "Shows the vessel's longitude around a celestial body.  Longitude is the angle from the bodies prime meridian.";
+            IsDefault = true;
         }
-
-        #endregion
-
-        #region Methods: public
 
         public override void Draw(SectionModule section)
         {
-            this.DrawLine(KSPUtil.PrintLongitude(FlightGlobals.ship_longitude), section.IsHud);
+            double angle = AngleHelper.Clamp180(FlightGlobals.ship_longitude);
+            DrawLine(Units.ToAngleDMS(angle) + (angle < 0.0 ? "W" : " E"), section.IsHud);
         }
-
-        #endregion
     }
 }

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Surface/MachNumber.cs
@@ -1,1 +1,43 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Surface
+{
+    using Extensions;
+    using Sections;
+
+    public class MachNumber : ReadoutModule
+    {
+        public MachNumber()
+        {
+            Name = "Mach Number";
+            Category = ReadoutCategory.GetCategory("Surface");
+            HelpString = "Shows the vessel's mach number.";
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (FlightGlobals.ActiveVessel.atmDensity > 0.0)
+            {
+                DrawLine(FlightGlobals.ActiveVessel.mach.ToMach(), section.IsHud);
+            }
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/ConvectionFlux.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Extensions;
+    using Sections;
+
+    public class ConvectionFlux : ReadoutModule
+    {
+        public ConvectionFlux()
+        {
+            Name = "Convection Flux";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails && FlightGlobals.ActiveVessel.atmDensity > 0.0)
+            {
+                DrawLine(ThermalProcessor.ConvectionFlux.ToFlux(), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CoolestPart.cs
@@ -1,1 +1,52 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Sections;
+
+    public class CoolestPart : ReadoutModule
+    {
+        public CoolestPart()
+        {
+            Name = "Coolest Part";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(ThermalProcessor.CoolestPartName, section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CoolestSkinTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class CoolestSkinTemperature : ReadoutModule
+    {
+        public CoolestSkinTemperature()
+        {
+            Name = "Coolest Skin Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.CoolestSkinTemperature, ThermalProcessor.CoolestSkinTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CoolestTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class CoolestTemperature : ReadoutModule
+    {
+        public CoolestTemperature()
+        {
+            Name = "Coolest Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.CoolestTemperature, ThermalProcessor.CoolestTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CriticalPart.cs
@@ -1,1 +1,52 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Sections;
+
+    public class CriticalPart : ReadoutModule
+    {
+        public CriticalPart()
+        {
+            Name = "Critical Part";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(ThermalProcessor.CriticalPartName, section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CriticalSkinTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class CriticalSkinTemperature : ReadoutModule
+    {
+        public CriticalSkinTemperature()
+        {
+            Name = "Critical Skin Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.CriticalSkinTemperature, ThermalProcessor.CriticalSkinTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CriticalTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class CriticalTemperature : ReadoutModule
+    {
+        public CriticalTemperature()
+        {
+            Name = "Critical Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.CriticalTemperature, ThermalProcessor.CriticalTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CriticalThermalPercentage.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Extensions;
+    using Sections;
+
+    public class CriticalThermalPercentage : ReadoutModule
+    {
+        public CriticalThermalPercentage()
+        {
+            Name = "Critical Thermal Percentage";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(ThermalProcessor.CriticalTemperaturePercentage.ToPercent(), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/HottestPart.cs
@@ -1,1 +1,52 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Sections;
+
+    public class HottestPart : ReadoutModule
+    {
+        public HottestPart()
+        {
+            Name = "Hottest Part";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(ThermalProcessor.HottestPartName, section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/HottestSkinTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class HottestSkinTemperature : ReadoutModule
+    {
+        public HottestSkinTemperature()
+        {
+            Name = "Hottest Skin Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.HottestSkinTemperature, ThermalProcessor.HottestSkinTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/HottestTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class HottestTemperature : ReadoutModule
+    {
+        public HottestTemperature()
+        {
+            Name = "Hottest Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.HottestTemperature, ThermalProcessor.HottestTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/InternalFlux.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Extensions;
+    using Sections;
+
+    public class InternalFlux : ReadoutModule
+    {
+        public InternalFlux()
+        {
+            Name = "Internal Flux";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(ThermalProcessor.InternalFlux.ToFlux(), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/RadiationFlux.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Extensions;
+    using Sections;
+
+    public class RadiationFlux : ReadoutModule
+    {
+        public RadiationFlux()
+        {
+            Name = "Radiation Flux";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(ThermalProcessor.RadiationFlux.ToFlux(), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/ThermalProcessor.cs
@@ -1,1 +1,161 @@
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using System;
+
+    public class ThermalProcessor : IUpdatable, IUpdateRequest
+    {
+        private static readonly ThermalProcessor instance = new ThermalProcessor();
+
+        static ThermalProcessor()
+        {
+            HottestTemperature = 0.0;
+            HottestTemperatureMax = 0.0;
+            HottestSkinTemperature = 0.0;
+            HottestSkinTemperatureMax = 0.0;
+            CoolestTemperature = 0.0;
+            CoolestTemperatureMax = 0.0;
+            CoolestSkinTemperature = 0.0;
+            CoolestSkinTemperatureMax = 0.0;
+            CriticalTemperature = 0.0;
+            CriticalTemperatureMax = 0.0;
+            CriticalSkinTemperature = 0.0;
+            CriticalSkinTemperatureMax = 0.0;
+            HottestPartName = string.Empty;
+            CoolestPartName = string.Empty;
+            CriticalPartName = string.Empty;
+        }
+
+        public static double ConvectionFlux { get; private set; }
+
+        public static string CoolestPartName { get; private set; }
+
+        public static double CoolestSkinTemperature { get; private set; }
+
+        public static double CoolestSkinTemperatureMax { get; private set; }
+
+        public static double CoolestTemperature { get; private set; }
+
+        public static double CoolestTemperatureMax { get; private set; }
+
+        public static string CriticalPartName { get; private set; }
+
+        public static double CriticalSkinTemperature { get; private set; }
+
+        public static double CriticalSkinTemperatureMax { get; private set; }
+
+        public static double CriticalTemperature { get; private set; }
+
+        public static double CriticalTemperatureMax { get; private set; }
+
+        public static double CriticalTemperaturePercentage { get; private set; }
+
+        public static string HottestPartName { get; private set; }
+
+        public static double HottestSkinTemperature { get; private set; }
+
+        public static double HottestSkinTemperatureMax { get; private set; }
+
+        public static double HottestTemperature { get; private set; }
+
+        public static double HottestTemperatureMax { get; private set; }
+
+        public static ThermalProcessor Instance
+        {
+            get
+            {
+                return instance;
+            }
+        }
+
+        public static double InternalFlux { get; private set; }
+
+        public static double RadiationFlux { get; private set; }
+
+        public static bool ShowDetails { get; private set; }
+
+        public void Update()
+        {
+            if (FlightGlobals.ActiveVessel.parts.Count == 0)
+            {
+                ShowDetails = false;
+                return;
+            }
+
+            ShowDetails = true;
+
+            ConvectionFlux = 0.0;
+            RadiationFlux = 0.0;
+            InternalFlux = 0.0;
+            HottestTemperature = 0.0;
+            HottestSkinTemperature = 0.0;
+            CoolestTemperature = double.MaxValue;
+            CoolestSkinTemperature = double.MaxValue;
+            CriticalTemperature = double.MaxValue;
+            CriticalSkinTemperature = double.MaxValue;
+            CriticalTemperaturePercentage = 0.0;
+            HottestPartName = string.Empty;
+            CoolestPartName = string.Empty;
+            CriticalPartName = string.Empty;
+
+            for (int i = 0; i < FlightGlobals.ActiveVessel.parts.Count; ++i)
+            {
+                Part part = FlightGlobals.ActiveVessel.parts[i];
+
+                ConvectionFlux = ConvectionFlux + part.thermalConvectionFlux;
+                RadiationFlux = RadiationFlux + part.thermalRadiationFlux;
+                InternalFlux = InternalFlux + part.thermalInternalFluxPrevious;
+
+                if (part.temperature > HottestTemperature || part.skinTemperature > HottestSkinTemperature)
+                {
+                    HottestTemperature = part.temperature;
+                    HottestTemperatureMax = part.maxTemp;
+                    HottestSkinTemperature = part.skinTemperature;
+                    HottestSkinTemperatureMax = part.skinMaxTemp;
+                    HottestPartName = part.partInfo.title;
+                }
+                if (part.temperature < CoolestTemperature || part.skinTemperature < CoolestSkinTemperature)
+                {
+                    CoolestTemperature = part.temperature;
+                    CoolestTemperatureMax = part.maxTemp;
+                    CoolestSkinTemperature = part.skinTemperature;
+                    CoolestSkinTemperatureMax = part.skinMaxTemp;
+                    CoolestPartName = part.partInfo.title;
+                }
+
+                if (part.temperature / part.maxTemp > CriticalTemperaturePercentage || part.skinTemperature / part.skinMaxTemp > CriticalTemperaturePercentage)
+                {
+                    CriticalTemperature = part.temperature;
+                    CriticalTemperatureMax = part.maxTemp;
+                    CriticalSkinTemperature = part.skinTemperature;
+                    CriticalSkinTemperatureMax = part.skinMaxTemp;
+                    CriticalTemperaturePercentage = Math.Max(part.temperature / part.maxTemp, part.skinTemperature / part.skinMaxTemp);
+                    CriticalPartName = part.partInfo.title;
+                }
+            }
+        }
+
+        public bool UpdateRequested { get; set; }
+
+        public static void RequestUpdate()
+        {
+            instance.UpdateRequested = true;
+        }
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/Vessel/DeltaVStaged.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/DeltaVStaged.cs
@@ -30,13 +30,6 @@
 {
     public class DeltaVStaged : ReadoutModule
     {
-        #region Fields
-
-        private int numberOfStages;
-        private bool showing;
-
-        #endregion
-
         #region Constructors
 
         public DeltaVStaged()

--- a/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirDemandSupply.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirDemandSupply.cs
@@ -65,16 +65,6 @@
                             .Sum(p => p.currentRequirement);
                     }
                 }
-                if (part.Modules.Contains("ModuleEnginesFX"))
-                {
-                    var engine = part.Modules["ModuleEnginesFX"] as ModuleEnginesFX;
-                    if (engine.isOperational)
-                    {
-                        demand += engine.propellants
-                            .Where(p => p.name == "IntakeAir")
-                            .Sum(p => p.currentRequirement);
-                    }
-                }
             }
             return demand;
         }

--- a/KerbalEngineer/Flight/Readouts/Vessel/Mass.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/Mass.cs
@@ -28,12 +28,6 @@
 {
     public class Mass : ReadoutModule
     {
-        #region Fields
-
-        private bool showing;
-
-        #endregion
-
         #region Constructors
 
         public Mass()

--- a/KerbalEngineer/Flight/Readouts/Vessel/PartCount.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/PartCount.cs
@@ -46,7 +46,7 @@
         {
             if (SimulationProcessor.ShowDetails)
             {
-                this.DrawLine(Units.ConcatF(SimulationProcessor.LastStage.partCount, SimulationProcessor.LastStage.totalPartCount), section.IsHud);
+                this.DrawLine(Units.ConcatF(SimulationProcessor.LastStage.partCount, SimulationProcessor.LastStage.totalPartCount, 0), section.IsHud);
             }
         }
 

--- a/KerbalEngineer/Flight/Sections/SectionEditor.cs
+++ b/KerbalEngineer/Flight/Sections/SectionEditor.cs
@@ -215,15 +215,18 @@
             this.ParentSection.Name = GUILayout.TextField(this.ParentSection.Name, this.textStyle);
             var isShowingInControlBar = !string.IsNullOrEmpty(this.ParentSection.Abbreviation);
             this.ParentSection.Abbreviation = GUILayout.TextField(this.ParentSection.Abbreviation, this.textStyle, GUILayout.Width(75.0f));
+
+            ParentSection.IsHud = GUILayout.Toggle(this.ParentSection.IsHud, "HUD", this.readoutButtonStyle, GUILayout.Width(50.0f));
+            if (ParentSection.IsHud)
+            {
+                this.ParentSection.IsHudBackground = GUILayout.Toggle(this.ParentSection.IsHudBackground, "BG", this.readoutButtonStyle, GUILayout.Width(50.0f));
+            }
+
             if (this.ParentSection.IsCustom)
             {
                 if (isShowingInControlBar && string.IsNullOrEmpty(this.ParentSection.Abbreviation))
                 {
                     DisplayStack.Instance.RequestResize();
-                }
-                if (this.ParentSection.IsHud = GUILayout.Toggle(this.ParentSection.IsHud, "HUD", this.readoutButtonStyle, GUILayout.Width(50.0f)))
-                {
-                    this.ParentSection.IsHudBackground = GUILayout.Toggle(this.ParentSection.IsHudBackground, "BG", this.readoutButtonStyle, GUILayout.Width(50.0f));
                 }
 
                 if (GUILayout.Button("DELETE SECTION", this.readoutButtonStyle, GUILayout.Width(150.0f)))

--- a/KerbalEngineer/Flight/Sections/SectionLibrary.cs
+++ b/KerbalEngineer/Flight/Sections/SectionLibrary.cs
@@ -1,7 +1,7 @@
 // 
 //     Kerbal Engineer Redux
 // 
-//     Copyright (C) 2014 CYBUTEK
+//     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
 //     it under the terms of the GNU General Public License as published by
@@ -19,22 +19,19 @@
 
 #region Using Directives
 
-using System.Collections.Generic;
-using System.Linq;
-
-using KerbalEngineer.Flight.Readouts;
-using KerbalEngineer.Settings;
-
-using UnityEngine;
-
 #endregion
 
 namespace KerbalEngineer.Flight.Sections
 {
+    using System.Collections.Generic;
+    using System.Linq;
+    using Readouts;
+    using Settings;
+    using UnityEngine;
+
     public static class SectionLibrary
     {
         #region Constructors
-
         /// <summary>
         ///     Sets up and populates the library with the stock sections on creation.
         /// </summary>
@@ -71,7 +68,15 @@
                 ReadoutModules = ReadoutLibrary.GetCategory(ReadoutCategory.GetCategory("Rendezvous")).Where(r => r.IsDefault).ToList()
             });
 
-            var hud1 = new SectionModule
+            CustomSections.Add(new SectionModule
+            {
+                Name = "THERMAL",
+                Abbreviation = "HEAT",
+                ReadoutModules = ReadoutLibrary.GetCategory(ReadoutCategory.GetCategory("Thermal")).Where(r => r.IsDefault).ToList(),
+                IsCustom = true
+            });
+            
+            SectionModule hud1 = new SectionModule
             {
                 Name = "HUD 1",
                 Abbreviation = "HUD 1",
@@ -90,7 +95,7 @@
             hud1.IsHud = true;
             CustomSections.Add(hud1);
 
-            var hud2 = new SectionModule
+            SectionModule hud2 = new SectionModule
             {
                 Name = "HUD 2",
                 Abbreviation = "HUD 2",
@@ -101,7 +106,8 @@
                     ReadoutLibrary.GetReadout("AltitudeTerrain"),
                     ReadoutLibrary.GetReadout("VerticalSpeed"),
                     ReadoutLibrary.GetReadout("HorizontalSpeed"),
-                    ReadoutLibrary.GetReadout("Biome")
+                    ReadoutLibrary.GetReadout("Biome"),
+                    ReadoutLibrary.GetReadout("MachNumber")
                 },
             };
             hud2.FloatingPositionX = Screen.width * 0.75f - (hud2.ReadoutModules.First().ContentWidth * 0.5f);
@@ -109,11 +115,9 @@
             hud2.IsHud = true;
             CustomSections.Add(hud2);
         }
-
         #endregion
 
         #region Properties
-
         /// <summary>
         ///     Gets and sets a list of custom sections.
         /// </summary>
@@ -133,13 +137,11 @@
         ///     Gets and sets a list of stock sections
         /// </summary>
         public static List<SectionModule> StockSections { get; set; }
-
         #endregion
 
         #region Updating
 
         #region Methods: public
-
         /// <summary>
         ///     Fixed update all of the sections.
         /// </summary>
@@ -160,17 +162,15 @@
             UpdateSections(StockSections);
             UpdateSections(CustomSections);
         }
-
         #endregion
 
         #region Methods: private
-
         /// <summary>
         ///     Fixed updates a list of sections.
         /// </summary>
         private static void FixedUpdateSections(IEnumerable<SectionModule> sections)
         {
-            foreach (var section in sections)
+            foreach (SectionModule section in sections)
             {
                 if (section.IsVisible)
                 {
@@ -184,13 +184,13 @@
         /// </summary>
         private static void UpdateSections(IEnumerable<SectionModule> sections)
         {
-            foreach (var section in sections)
+            foreach (SectionModule section in sections)
             {
                 if (section.IsVisible)
                 {
                     if (!section.IsFloating)
                     {
-                        foreach (var readout in section.ReadoutModules)
+                        foreach (ReadoutModule readout in section.ReadoutModules)
                         {
                             if (readout.ResizeRequested)
                             {
@@ -203,7 +203,7 @@
                     }
                     else
                     {
-                        foreach (var readout in section.ReadoutModules)
+                        foreach (ReadoutModule readout in section.ReadoutModules)
                         {
                             if (readout.ResizeRequested)
                             {
@@ -218,13 +218,11 @@
                 NumberOfSections++;
             }
         }
-
         #endregion
 
         #endregion
 
         #region Saving and Loading
-
         /// <summary>
         ///     Loads the state of all stored sections.
         /// </summary>
@@ -243,11 +241,11 @@
                 }
             });
 
-            var handler = SettingHandler.Load("SectionLibrary.xml", new[] {typeof(List<SectionModule>)});
+            SettingHandler handler = SettingHandler.Load("SectionLibrary.xml", new[] { typeof(List<SectionModule>) });
             StockSections = handler.Get("StockSections", StockSections);
             CustomSections = handler.Get("CustomSections", CustomSections);
 
-            foreach (var section in GetAllSections())
+            foreach (SectionModule section in GetAllSections())
             {
                 section.ClearNullReadouts();
             }
@@ -258,22 +256,20 @@
         /// </summary>
         public static void Save()
         {
-            var handler = new SettingHandler();
+            SettingHandler handler = new SettingHandler();
             handler.Set("StockSections", StockSections);
             handler.Set("CustomSections", CustomSections);
             handler.Save("SectionLibrary.xml");
         }
-
         #endregion
 
         #region Methods
-
         /// <summary>
         ///     Gets a list containing all section modules.
         /// </summary>
         public static List<SectionModule> GetAllSections()
         {
-            var sections = new List<SectionModule>();
+            List<SectionModule> sections = new List<SectionModule>();
             sections.AddRange(StockSections);
             sections.AddRange(CustomSections);
             return sections;
@@ -326,7 +322,6 @@
         {
             return StockSections.Remove(GetStockSection(name));
         }
-
         #endregion
     }
 }

--- a/KerbalEngineer/Flight/Sections/SectionWindow.cs
+++ b/KerbalEngineer/Flight/Sections/SectionWindow.cs
@@ -134,7 +134,11 @@
                                                    (!this.ParentSection.IsHud || this.ParentSection.IsEditorVisible) ? this.windowStyle
                                                        : this.ParentSection.IsHudBackground && this.ParentSection.LineCount > 0
                                                            ? this.hudWindowBgStyle
-                                                           : this.hudWindowStyle).ClampToScreen();
+                                                           : this.hudWindowStyle);
+
+            windowPosition = (ParentSection.IsHud) ? windowPosition.ClampInsideScreen() : windowPosition.ClampToScreen();
+
+
             this.ParentSection.FloatingPositionX = this.windowPosition.x;
             this.ParentSection.FloatingPositionY = this.windowPosition.y;
         }

--- a/KerbalEngineer/Helpers/AngleHelper.cs
+++ b/KerbalEngineer/Helpers/AngleHelper.cs
@@ -17,21 +17,30 @@
 //     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // 
 
-#region Using Directives
-
-using UnityEngine;
-
-#endregion
-
 namespace KerbalEngineer.Helpers
 {
+    using UnityEngine;
+
     public static class AngleHelper
     {
-        #region Methods: public
+        public static double Clamp180(double angle)
+        {
+            angle = Clamp360(angle);
+            if (angle > 180.0)
+            {
+                angle = angle - 360.0;
+            }
+            return angle;
+        }
 
-        public static double Clamp360(double value)
+        public static double Clamp360(double angle)
         {
-            return ClampBetween(value, 0.0, 360.0);
+            angle = angle % 360.0;
+            if (angle < 0.0)
+            {
+                angle = angle + 360.0;
+            }
+            return angle;
         }
 
         public static double ClampBetween(double value, double minimum, double maximum)
@@ -51,8 +60,8 @@
 
         public static double GetAngleBetweenVectors(Vector3d left, Vector3d right)
         {
-            var angle = Vector3d.Angle(left, right);
-            var rotated = QuaternionD.AngleAxis(90.0, Vector3d.forward) * right;
+            double angle = Vector3d.Angle(left, right);
+            Vector3d rotated = QuaternionD.AngleAxis(90.0, Vector3d.forward) * right;
 
             if (Vector3d.Angle(rotated, left) > 90.0)
             {
@@ -60,7 +69,5 @@
             }
             return angle;
         }
-
-        #endregion
     }
 }

--- a/KerbalEngineer/Helpers/Units.cs
+++ b/KerbalEngineer/Helpers/Units.cs
@@ -1,7 +1,7 @@
 // 
 //     Kerbal Engineer Redux
 // 
-//     Copyright (C) 2014 CYBUTEK
+//     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
 //     it under the terms of the GNU General Public License as published by
@@ -19,14 +19,10 @@
 
 namespace KerbalEngineer.Helpers
 {
-    #region Using Directives
     using System;
-
-    #endregion
 
     public static class Units
     {
-        #region Methods
         public const double GRAVITY = 9.80665;
 
         public static string Concat(int value1, int value2)
@@ -85,6 +81,17 @@
         public static string ToAngle(double value, int decimals = 5)
         {
             return value.ToString("F" + decimals) + "°";
+        }
+
+        public static string ToAngleDMS(double value)
+        {
+            double absAngle = Math.Abs(value);
+            int deg = (int)Math.Floor(absAngle);
+            double rem = absAngle - deg;
+            int min = (int)Math.Floor(rem * 60);
+            rem -= ((double)min / 60);
+            int sec = (int)Math.Floor(rem * 3600);
+            return String.Format("{0:0}° {1:00}' {2:00}\"", deg, min, sec);
         }
 
         public static string ToDistance(double value, int decimals = 1)
@@ -116,6 +123,11 @@
             return value.ToString("N" + decimals) + "Mm";
         }
 
+        public static string ToFlux(double value)
+        {
+            return value.ToString("#,0.00") + "W";
+        }
+
         public static string ToForce(double value)
         {
             return value.ToString((value < 100000.0) ? (value < 10000.0) ? (value < 100.0) ? (Math.Abs(value) < Double.Epsilon) ? "N0" : "N3" : "N2" : "N1" : "N0") + "kN";
@@ -128,6 +140,11 @@
             return value1.ToString(format1) + " / " + value2.ToString(format2) + "kN";
         }
 
+        public static string ToMach(double value)
+        {
+            return value.ToString("0.00") + "Ma";
+        }
+
         public static string ToMass(double value, int decimals = 0)
         {
             if (value >= 1000.0)
@@ -171,6 +188,16 @@
             return value.ToString("N" + decimals) + "m/s";
         }
 
+        public static string ToTemperature(double value)
+        {
+            return value.ToString("#,0") + "K";
+        }
+
+        public static string ToTemperature(double value1, double value2)
+        {
+            return value1.ToString("#,0") + " / " + value2.ToString("#,0") + "K";
+        }
+
         public static string ToTime(double value)
         {
             return TimeFormatter.ConvertToString(value);
@@ -180,6 +207,5 @@
         {
             return value.ToString((value < 100.0) ? (Math.Abs(value) < Double.Epsilon) ? "N0" : "N1" : "N0") + "kNm";
         }
-        #endregion
     }
 }

--- a/KerbalEngineer/KerbalEngineer.csproj
+++ b/KerbalEngineer/KerbalEngineer.csproj
@@ -48,6 +48,7 @@
     <Compile Include="Editor\ResourceInfoItem.cs" />
     <Compile Include="Extensions\FloatExtensions.cs" />
     <Compile Include="Extensions\OrbitExtensions.cs" />
+    <Compile Include="Extensions\StringExtensions.cs" />
     <Compile Include="Flight\ActionMenuGui.cs" />
     <Compile Include="Flight\Presets\Preset.cs" />
     <Compile Include="Flight\Readouts\Miscellaneous\SystemTime.cs" />
@@ -89,6 +90,21 @@
     <Compile Include="Flight\Readouts\Surface\Biome.cs" />
     <Compile Include="Flight\Readouts\Surface\HorizontalAcceleration.cs" />
     <Compile Include="Flight\Readouts\Surface\VerticalAcceleration.cs" />
+    <Compile Include="Flight\Readouts\Surface\MachNumber.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CoolestSkinTemperature.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CriticalPart.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CoolestPart.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CoolestTemperature.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CriticalThermalPercentage.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CriticalSkinTemperature.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CriticalTemperature.cs" />
+    <Compile Include="Flight\Readouts\Thermal\HottestSkinTemperature.cs" />
+    <Compile Include="Flight\Readouts\Thermal\InternalFlux.cs" />
+    <Compile Include="Flight\Readouts\Thermal\RadiationFlux.cs" />
+    <Compile Include="Flight\Readouts\Thermal\ConvectionFlux.cs" />
+    <Compile Include="Flight\Readouts\Thermal\HottestTemperature.cs" />
+    <Compile Include="Flight\Readouts\Thermal\HottestPart.cs" />
+    <Compile Include="Flight\Readouts\Thermal\ThermalProcessor.cs" />
     <Compile Include="Flight\Readouts\Vessel\AttitudeProcessor.cs" />
     <Compile Include="Flight\Readouts\Vessel\DeltaVCurrentTotal.cs" />
     <Compile Include="Flight\Readouts\Vessel\PitchRate.cs" />
@@ -208,7 +224,7 @@
   </ItemGroup>
   <ItemGroup>
     <Reference Include="Assembly-CSharp">
-      <HintPath>..\..\..\..\..\..\Program Files (x86)\Steam\SteamApps\common\Kerbal Space Program\KSP_Data\Managed\Assembly-CSharp.dll</HintPath>
+      <HintPath>..\Game\KSP_Data\Managed\Assembly-CSharp.dll</HintPath>
       <Private>False</Private>
     </Reference>
     <Reference Include="System">
@@ -220,7 +236,7 @@
       <Private>False</Private>
     </Reference>
     <Reference Include="UnityEngine">
-      <HintPath>..\..\..\..\..\..\Program Files (x86)\Steam\SteamApps\common\Kerbal Space Program\KSP_Data\Managed\UnityEngine.dll</HintPath>
+      <HintPath>..\Game\KSP_Data\Managed\UnityEngine.dll</HintPath>
       <Private>False</Private>
     </Reference>
   </ItemGroup>

--- a/KerbalEngineer/Properties/AssemblyInfo.cs
+++ b/KerbalEngineer/Properties/AssemblyInfo.cs
@@ -32,5 +32,5 @@
 // You can specify all the values or you can default the Build and Revision Numbers 
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion(KerbalEngineer.EngineerGlobals.AssemblyVersion)]
+[assembly: AssemblyVersion(KerbalEngineer.EngineerGlobals.ASSEMBLY_VERSION)]
 

--- a/KerbalEngineer/VesselSimulator/EngineSim.cs
+++ b/KerbalEngineer/VesselSimulator/EngineSim.cs
@@ -31,6 +31,7 @@
         private static readonly Pool<EngineSim> pool = new Pool<EngineSim>(Create, Reset);
 
         private readonly ResourceContainer resourceConsumptions = new ResourceContainer();
+        private readonly ResourceContainer resourceFlowModes = new ResourceContainer();
 
         public double actualThrust = 0;
         public bool isActive = false;
@@ -52,6 +53,7 @@
         private static void Reset(EngineSim engineSim)
         {
             engineSim.resourceConsumptions.Reset();
+            engineSim.resourceFlowModes.Reset();
             engineSim.actualThrust = 0;
             engineSim.isActive = false;
             engineSim.isp = 0;
@@ -86,11 +88,10 @@
                          List<Propellant> propellants,
                          bool active,
                          float resultingThrust,
-                         List<Transform> thrustTransforms)
+                         List<Transform> thrustTransforms,
+                        LogMsg log)
         {
             EngineSim engineSim = pool.Borrow();
-
-            StringBuilder buffer = null;
 
             engineSim.isp = 0.0;
             engineSim.maxMach = 0.0f;
@@ -99,61 +100,75 @@
             engineSim.isActive = active;
             engineSim.thrustVec = vecThrust;
             engineSim.resourceConsumptions.Reset();
+            engineSim.resourceFlowModes.Reset();
             engineSim.appliedForces.Clear();
 
             double flowRate = 0.0;
             if (engineSim.partSim.hasVessel)
             {
+                if (log != null) log.buf.AppendLine("hasVessel is true"); 
+
                 float flowModifier = GetFlowModifier(atmChangeFlow, atmCurve, engineSim.partSim.part.atmDensity, velCurve, machNumber, ref engineSim.maxMach);
                 engineSim.isp = atmosphereCurve.Evaluate((float)atmosphere);
                 engineSim.thrust = GetThrust(Mathf.Lerp(minFuelFlow, maxFuelFlow, GetThrustPercent(thrustPercentage)) * flowModifier, engineSim.isp);
                 engineSim.actualThrust = engineSim.isActive ? resultingThrust : 0.0;
+                if (log != null)
+                {
+                    log.buf.AppendFormat("flowMod = {0:g6}\n", flowModifier);
+                    log.buf.AppendFormat("isp     = {0:g6}\n", engineSim.isp);
+                    log.buf.AppendFormat("thrust  = {0:g6}\n", engineSim.thrust);
+                    log.buf.AppendFormat("actual  = {0:g6}\n", engineSim.actualThrust);
+                }
 
                 if (throttleLocked)
                 {
+                    if (log != null) log.buf.AppendLine("throttleLocked is true, using thrust for flowRate");
                     flowRate = GetFlowRate(engineSim.thrust, engineSim.isp);
                 }
                 else
                 {
                     if (currentThrottle > 0.0f && engineSim.partSim.isLanded == false)
                     {
+                        if (log != null) log.buf.AppendLine("throttled up and not landed, using actualThrust for flowRate");
                         flowRate = GetFlowRate(engineSim.actualThrust, engineSim.isp);
                     }
                     else
                     {
+                        if (log != null) log.buf.AppendLine("throttled down or landed, using thrust for flowRate");
                         flowRate = GetFlowRate(engineSim.thrust, engineSim.isp);
                     }
                 }
             }
             else
             {
+                if (log != null) log.buf.AppendLine("hasVessel is false");
                 float flowModifier = GetFlowModifier(atmChangeFlow, atmCurve, CelestialBodies.SelectedBody.GetDensity(BuildAdvanced.Altitude), velCurve, machNumber, ref engineSim.maxMach);
                 engineSim.isp = atmosphereCurve.Evaluate((float)atmosphere);
                 engineSim.thrust = GetThrust(Mathf.Lerp(minFuelFlow, maxFuelFlow, GetThrustPercent(thrustPercentage)) * flowModifier, engineSim.isp);
+                engineSim.actualThrust = 0d;
+                if (log != null)
+                {
+                    log.buf.AppendFormat("flowMod = {0:g6}\n", flowModifier);
+                    log.buf.AppendFormat("isp     = {0:g6}\n", engineSim.isp);
+                    log.buf.AppendFormat("thrust  = {0:g6}\n", engineSim.thrust);
+                    log.buf.AppendFormat("actual  = {0:g6}\n", engineSim.actualThrust);
+                }
+
+                if (log != null) log.buf.AppendLine("no vessel, using thrust for flowRate");
                 flowRate = GetFlowRate(engineSim.thrust, engineSim.isp);
             }
 
-            if (SimManager.logOutput)
-            {
-                buffer = new StringBuilder(1024);
-                buffer.AppendFormat("flowRate = {0:g6}\n", flowRate);
-            }
-
-            engineSim.thrust = flowRate * (engineSim.isp * IspG);
-            // I did not look into the diff between those 2 so I made them equal...
-            engineSim.actualThrust = engineSim.thrust;
+            if (log != null) log.buf.AppendFormat("flowRate = {0:g6}\n", flowRate);
 
             float flowMass = 0f;
             for (int i = 0; i < propellants.Count; ++i)
             {
                 Propellant propellant = propellants[i];
-                flowMass += propellant.ratio * ResourceContainer.GetResourceDensity(propellant.id);
-            }
-
-            if (SimManager.logOutput)
-            {
-                buffer.AppendFormat("flowMass = {0:g6}\n", flowMass);
-            }
+                if (!propellant.ignoreForIsp)
+                    flowMass += propellant.ratio * ResourceContainer.GetResourceDensity(propellant.id);
+            }
+
+            if (log != null) log.buf.AppendFormat("flowMass = {0:g6}\n", flowMass);
 
             for (int i = 0; i < propellants.Count; ++i)
             {
@@ -165,21 +180,14 @@
                 }
 
                 double consumptionRate = propellant.ratio * flowRate / flowMass;
-                if (SimManager.logOutput)
-                {
-                    buffer.AppendFormat(
+                if (log != null) log.buf.AppendFormat(
                         "Add consumption({0}, {1}:{2:d}) = {3:g6}\n",
                         ResourceContainer.GetResourceName(propellant.id),
                         theEngine.name,
                         theEngine.partId,
                         consumptionRate);
-                }
                 engineSim.resourceConsumptions.Add(propellant.id, consumptionRate);
-            }
-
-            if (SimManager.logOutput)
-            {
-                MonoBehaviour.print(buffer);
+                engineSim.resourceFlowModes.Add(propellant.id, (double)propellant.GetFlowMode());
             }
 
             double thrustPerThrustTransform = engineSim.thrust / thrustTransforms.Count;
@@ -285,7 +293,7 @@
                     sourcePartSets.Add(type, sourcePartSet);
                 }
 
-                switch (ResourceContainer.GetResourceFlowMode(type))
+                switch ((ResourceFlowMode)this.resourceFlowModes[type])
                 {
                     case ResourceFlowMode.NO_FLOW:
                         if (partSim.resources[type] > SimManager.RESOURCE_MIN && partSim.resourceFlowStates[type] != 0)

--- a/KerbalEngineer/VesselSimulator/PartSim.cs
+++ b/KerbalEngineer/VesselSimulator/PartSim.cs
@@ -34,14 +34,15 @@
 
         private readonly List<AttachNodeSim> attachNodes = new List<AttachNodeSim>();
 
+        public double realMass;
         public double baseMass;
+        public double baseMassForCoM;
         public Vector3d centerOfMass;
-        public double cost;
+        public double baseCost;
         public int decoupledInStage;
         public bool fuelCrossFeed;
         public List<PartSim> fuelTargets = new List<PartSim>();
         public bool hasModuleEngines;
-        public bool hasModuleEnginesFX;
         public bool hasMultiModeEngine;
 
         public bool hasVessel;
@@ -55,8 +56,7 @@
         public bool isNoPhysics;
         public bool isSepratron;
         public bool isFairing;
-        public bool localCorrectThrust;
-        public float moduleMass;
+        public float fairingMass;
         public int stageIndex;
         public String name;
         public String noCrossFeedNodeKey;
@@ -88,7 +88,9 @@
             partSim.resourceDrains.Reset();
             partSim.resourceFlowStates.Reset();
             partSim.resources.Reset();
+            partSim.baseCost = 0d;
             partSim.baseMass = 0d;
+            partSim.baseMassForCoM = 0d;
             partSim.startMass = 0d;
         }
 
@@ -100,17 +102,13 @@
         public static PartSim New(Part thePart, int id, double atmosphere, LogMsg log)
         {
             PartSim partSim = pool.Borrow();
-
 
             partSim.part = thePart;
             partSim.centerOfMass = thePart.transform.TransformPoint(thePart.CoMOffset);
             partSim.partId = id;
             partSim.name = partSim.part.partInfo.name;
 
-            if (log != null)
-            {
-                log.buf.AppendLine("Create PartSim for " + partSim.name);
-            }
+            if (log != null) log.buf.AppendLine("Create PartSim for " + partSim.name);
 
             partSim.parent = null;
             partSim.parentAttach = partSim.part.attachMode;
@@ -120,24 +118,38 @@
             partSim.isFuelLine = partSim.part.HasModule<CModuleFuelLine>();
             partSim.isFuelTank = partSim.part is FuelTank;
             partSim.isSepratron = partSim.IsSepratron();
+            partSim.isFairing = partSim.IsFairing(partSim.part);
             partSim.inverseStage = partSim.part.inverseStage;
             //MonoBehaviour.print("inverseStage = " + inverseStage);
 
-            partSim.cost = partSim.part.GetCostWet();
+            partSim.baseCost = partSim.part.GetCostDry();
+
+            if (log != null)
+            {
+                log.buf.AppendLine("Parent part = " + (partSim.part.parent == null ? "null" : partSim.part.parent.partInfo.name));
+                log.buf.AppendLine("physicalSignificance = " + partSim.part.physicalSignificance);
+                log.buf.AppendLine("PhysicsSignificance = " + partSim.part.PhysicsSignificance);
+            }
 
             // Work out if the part should have no physical significance
-            partSim.isNoPhysics = partSim.part.HasModule<LaunchClamp>() ||
-                               partSim.part.physicalSignificance == Part.PhysicalSignificance.NONE ||
-                               partSim.part.PhysicsSignificance == 1;
-
-            if (!partSim.isNoPhysics)
-            {
-                partSim.baseMass = partSim.part.mass;
-            }
-
-            if (SimManager.logOutput)
-            {
-                MonoBehaviour.print((partSim.isNoPhysics ? "Ignoring" : "Using") + " part.mass of " + partSim.part.mass);
+            // The root part is never "no physics"
+            partSim.isNoPhysics = partSim.part.physicalSignificance == Part.PhysicalSignificance.NONE ||
+                                    partSim.part.PhysicsSignificance == 1;
+
+            if (partSim.part.HasModule<LaunchClamp>())
+            {
+                partSim.realMass = 0d;
+                if (log != null) log.buf.AppendLine("Ignoring mass of launch clamp");
+            }
+            else
+            {
+                partSim.realMass = partSim.part.mass;
+                if (log != null) log.buf.AppendLine("Using part.mass of " + partSim.part.mass);
+            }
+
+            if (partSim.isFairing)
+            {
+                partSim.fairingMass = partSim.part.GetModuleMass((float)partSim.realMass);
             }
 
             for (int i = 0; i < partSim.part.Resources.Count; i++)
@@ -148,21 +160,17 @@
                 // This can happen if a resource capacity is 0 and tweakable
                 if (!Double.IsNaN(resource.amount))
                 {
-                    if (SimManager.logOutput)
-                    {
-                        MonoBehaviour.print(resource.resourceName + " = " + resource.amount);
-                    }
+                    if (log != null)
+                        log.buf.AppendLine(resource.resourceName + " = " + resource.amount);
 
                     partSim.resources.Add(resource.info.id, resource.amount);
                     partSim.resourceFlowStates.Add(resource.info.id, resource.flowState ? 1 : 0);
                 }
                 else
                 {
-                    MonoBehaviour.print(resource.resourceName + " is NaN. Skipping.");
-                }
-            }
-
-            partSim.startMass = partSim.GetMass(-1);
+                    if (log != null) log.buf.AppendLine(resource.resourceName + " is NaN. Skipping.");
+                }
+            }
 
             partSim.hasVessel = (partSim.part.vessel != null);
             partSim.isLanded = partSim.hasVessel && partSim.part.vessel.Landed;
@@ -174,15 +182,12 @@
             partSim.initialVesselName = partSim.part.initialVesselName;
 
             partSim.hasMultiModeEngine = partSim.part.HasModule<MultiModeEngine>();
-            partSim.hasModuleEnginesFX = partSim.part.HasModule<ModuleEnginesFX>();
             partSim.hasModuleEngines = partSim.part.HasModule<ModuleEngines>();
 
-            partSim.isEngine = partSim.hasMultiModeEngine || partSim.hasModuleEnginesFX || partSim.hasModuleEngines;
-
-            if (SimManager.logOutput)
-            {
-                MonoBehaviour.print("Created " + partSim.name + ". Decoupled in stage " + partSim.decoupledInStage);
-            }
+            partSim.isEngine = partSim.hasMultiModeEngine || partSim.hasModuleEngines;
+
+            if (log != null) log.buf.AppendLine("Created " + partSim.name + ". Decoupled in stage " + partSim.decoupledInStage);
+
             return partSim;
         }
 
@@ -204,7 +209,6 @@
 
         public void CreateEngineSims(List<EngineSim> allEngines, double atmosphere, double mach, bool vectoredThrust, bool fullThrust, LogMsg log)
         {
-            bool correctThrust = SimManager.DoesEngineUseCorrectedThrust(part);
             if (log != null)
             {
                 log.buf.AppendLine("CreateEngineSims for " + this.name);
@@ -213,26 +217,21 @@
                     PartModule partMod = this.part.Modules[i];
                     log.buf.AppendLine("Module: " + partMod.moduleName);
                 }
-
-                log.buf.AppendLine("correctThrust = " + correctThrust);
             }
 
             if (hasMultiModeEngine)
             {
-                // A multi-mode engine has multiple ModuleEnginesFX but only one is active at any point
-                // The mode of the engine is the engineID of the ModuleEnginesFX that is active
+                // A multi-mode engine has multiple ModuleEngines but only one is active at any point
+                // The mode of the engine is the engineID of the ModuleEngines that is active
                 string mode = part.GetModule<MultiModeEngine>().mode;
 
-                List<ModuleEnginesFX> engines = part.GetModules<ModuleEnginesFX>();
+                List<ModuleEngines> engines = part.GetModules<ModuleEngines>();
                 for (int i = 0; i < engines.Count; ++i)
                 {
-                    ModuleEnginesFX engine = engines[i];
+                    ModuleEngines engine = engines[i];
                     if (engine.engineID == mode)
                     {
-                        if (log != null)
-                        {
-                            log.buf.AppendLine("Module: " + engine.moduleName);
-                        }
+                        if (log != null) log.buf.AppendLine("Module: " + engine.moduleName);
 
                         Vector3 thrustvec = this.CalculateThrustVector(vectoredThrust ? engine.thrustTransforms : null, log);
 
@@ -254,47 +253,43 @@
                             engine.propellants,
                             engine.isOperational,
                             engine.resultingThrust,
-                            engine.thrustTransforms);
+                            engine.thrustTransforms,
+                            log);
                         allEngines.Add(engineSim);
                     }
                 }
             }
-            else
-            {
-                if (hasModuleEngines)
-                {
-                    List<ModuleEngines> engines = part.GetModules<ModuleEngines>();
-                    for (int i = 0; i < engines.Count; ++i)
-                    {
-                        ModuleEngines engine = engines[i];
-                        if (log != null)
-                        {
-                            log.buf.AppendLine("Module: " + engine.moduleName);
-                        }
-
-                        Vector3 thrustvec = this.CalculateThrustVector(vectoredThrust ? engine.thrustTransforms : null, log);
-
-                        EngineSim engineSim = EngineSim.New(
-                            this,
-                            atmosphere,
-                            (float)mach,
-                            engine.maxFuelFlow,
-                            engine.minFuelFlow,
-                            engine.thrustPercentage,
-                            thrustvec,
-                            engine.atmosphereCurve,
-                            engine.atmChangeFlow,
-                            engine.useAtmCurve ? engine.atmCurve : null,
-                            engine.useVelCurve ? engine.velCurve : null,
-                            engine.currentThrottle,
-                            engine.g,
-                            engine.throttleLocked || fullThrust,
-                            engine.propellants,
-                            engine.isOperational,
-                            engine.resultingThrust,
-                            engine.thrustTransforms);
-                        allEngines.Add(engineSim);
-                    }
+            else if (hasModuleEngines)
+            {
+                List<ModuleEngines> engines = part.GetModules<ModuleEngines>();
+                for (int i = 0; i < engines.Count; ++i)
+                {
+                    ModuleEngines engine = engines[i];
+                    if (log != null) log.buf.AppendLine("Module: " + engine.moduleName);
+
+                    Vector3 thrustvec = this.CalculateThrustVector(vectoredThrust ? engine.thrustTransforms : null, log);
+
+                    EngineSim engineSim = EngineSim.New(
+                        this,
+                        atmosphere,
+                        (float)mach,
+                        engine.maxFuelFlow,
+                        engine.minFuelFlow,
+                        engine.thrustPercentage,
+                        thrustvec,
+                        engine.atmosphereCurve,
+                        engine.atmChangeFlow,
+                        engine.useAtmCurve ? engine.atmCurve : null,
+                        engine.useVelCurve ? engine.velCurve : null,
+                        engine.currentThrottle,
+                        engine.g,
+                        engine.throttleLocked || fullThrust,
+                        engine.propellants,
+                        engine.isOperational,
+                        engine.resultingThrust,
+                        engine.thrustTransforms,
+                        log);
+                    allEngines.Add(engineSim);
                 }
             }
 
@@ -351,17 +346,22 @@
             buffer.Append(name);
             buffer.AppendFormat(":[id = {0:d}, decouple = {1:d}, invstage = {2:d}", partId, decoupledInStage, inverseStage);
 
-            buffer.AppendFormat(", vesselName = '{0}'", vesselName);
-            buffer.AppendFormat(", vesselType = {0}", SimManager.GetVesselTypeString(vesselType));
-            buffer.AppendFormat(", initialVesselName = '{0}'", initialVesselName);
+            //buffer.AppendFormat(", vesselName = '{0}'", vesselName);
+            //buffer.AppendFormat(", vesselType = {0}", SimManager.GetVesselTypeString(vesselType));
+            //buffer.AppendFormat(", initialVesselName = '{0}'", initialVesselName);
+
+            buffer.AppendFormat(", isNoPhys = {0}", isNoPhysics);
+            buffer.AppendFormat(", baseMass = {0}", baseMass);
+            buffer.AppendFormat(", baseMassForCoM = {0}", baseMassForCoM);
 
             buffer.AppendFormat(", fuelCF = {0}", fuelCrossFeed);
             buffer.AppendFormat(", noCFNKey = '{0}'", noCrossFeedNodeKey);
 
             buffer.AppendFormat(", isSep = {0}", isSepratron);
 
-            foreach (int type in resources.Types)
-            {
+            for (int i = 0; i < resources.Types.Count; i++)
+            {
+                int type = resources.Types[i];
                 buffer.AppendFormat(", {0} = {1:g6}", ResourceContainer.GetResourceName(type), resources[type]);
             }
 
@@ -384,12 +384,11 @@
             if (allParts != null)
             {
                 String newPrefix = prefix + " ";
-                foreach (PartSim partSim in allParts)
-                {
+                for (int i = 0; i < allParts.Count; i++)
+                {
+                    PartSim partSim = allParts[i];
                     if (partSim.parent == this)
-                    {
                         partSim.DumpPartToBuffer(buffer, newPrefix, allParts);
-                    }
                 }
             }
         }
@@ -398,32 +397,52 @@
         {
             foreach (int type in types)
             {
-                if (resources.HasType(type) && resourceFlowStates[type] != 0 && resources[type] > SimManager.RESOURCE_MIN)
-                {
+                if (resources.HasType(type) && resourceFlowStates[type] != 0 && resources[type] > SimManager.RESOURCE_PART_EMPTY_THRESH)
                     return false;
-                }
             }
 
             return true;
         }
 
-        public double GetMass(int currentStage)
-        {
-            double mass = baseMass;
+        public double GetMass(int currentStage, bool forCoM = false)
+        {
+            if (decoupledInStage >= currentStage)
+                return 0d;
+
+            double mass = forCoM ? baseMassForCoM : baseMass;
 
             for (int i = 0; i < resources.Types.Count; ++i)
             {
                 mass += resources.GetResourceMass(resources.Types[i]);
             }
 
-            if (hasVessel == false && isFairing && inverseStage < currentStage)
-            {
-                mass = mass + moduleMass;
+            if (hasVessel == false && isFairing && currentStage > inverseStage)
+            {
+                mass += fairingMass;
+            }
+            else if (hasVessel && isFairing && currentStage <= inverseStage)
+            {
+                mass -= fairingMass;
             }
 
             return mass;
         }
-                
+
+        public double GetCost(int currentStage)
+        {
+            if (decoupledInStage >= currentStage)
+                return 0d;
+
+            double cost = baseCost;
+
+            for (int i = 0; i < resources.Types.Count; ++i)
+            {
+                cost += resources.GetResourceCost(resources.Types[i]);
+            }
+
+            return cost;
+        }
+
         public void ReleasePart()
         {
             this.part = null;
@@ -443,49 +462,41 @@
             // Rule 1: Each part can be only visited once, If it is visited for second time in particular search it returns as is.
             if (visited.Contains(this))
             {
-                if (log != null)
-                {
-                    log.buf.AppendLine(indent + "Returning empty set, already visited (" + name + ":" + partId + ")");
-                }
-
+                if (log != null) log.buf.AppendLine(indent + "Returning empty set, already visited (" + name + ":" + partId + ")");
                 return;
             }
 
-            //if (log != null)
-            //    log.buf.AppendLine(indent + "Adding this to visited");
+            if (log != null) log.buf.AppendLine(indent + "Adding this to visited");
 
             visited.Add(this);
 
             // Rule 2: Part performs scan on start of every fuel pipe ending in it. This scan is done in order in which pipes were installed.
             // Then it makes an union of fuel tank sets each pipe scan returned. If the resulting list is not empty, it is returned as result.
-            //MonoBehaviour.print("foreach fuel line");
+            //MonoBehaviour.print("for each fuel line");
 
             int lastCount = allSources.Count;
 
             for (int i = 0; i < this.fuelTargets.Count; i++)
             {
                 PartSim partSim = this.fuelTargets[i];
-                if (visited.Contains(partSim))
-                {
-                    //if (log != null)
-                    //    log.buf.AppendLine(indent + "Fuel target already visited, skipping (" + partSim.name + ":" + partSim.partId + ")");
-                }
-                else
-                {
-                    //if (log != null)
-                    //    log.buf.AppendLine(indent + "Adding fuel target as source (" + partSim.name + ":" + partSim.partId + ")");
-
-                    partSim.GetSourceSet(type, allParts, visited, allSources, log, indent);
+                if (partSim != null)
+                {
+                    if (visited.Contains(partSim))
+                    {
+                        if (log != null) log.buf.AppendLine(indent + "Fuel target already visited, skipping (" + partSim.name + ":" + partSim.partId + ")");
+                    }
+                    else
+                    {
+                        if (log != null) log.buf.AppendLine(indent + "Adding fuel target as source (" + partSim.name + ":" + partSim.partId + ")");
+
+                        partSim.GetSourceSet(type, allParts, visited, allSources, log, indent);
+                    }
                 }
             }
 
             if (allSources.Count > lastCount)
             {
-                if (log != null)
-                {
-                    log.buf.AppendLine(indent + "Returning " + (allSources.Count - lastCount) + " fuel target sources (" + this.name + ":" + this.partId + ")");
-                }
-
+                if (log != null) log.buf.AppendLine(indent + "Returning " + (allSources.Count - lastCount) + " fuel target sources (" + this.name + ":" + this.partId + ")");
                 return;
             }
 
@@ -500,7 +511,7 @@
             if (fuelCrossFeed)
             {
                 lastCount = allSources.Count;
-                //MonoBehaviour.print("foreach attach node");
+                //MonoBehaviour.print("for each attach node");
                 for (int i = 0; i < this.attachNodes.Count; i++)
                 {
                     AttachNodeSim attachSim = this.attachNodes[i];
@@ -514,13 +525,11 @@
                             {
                                 if (visited.Contains(attachSim.attachedPartSim))
                                 {
-                                    //if (log != null)
-                                    //    log.buf.AppendLine(indent + "Attached part already visited, skipping (" + attachSim.attachedPartSim.name + ":" + attachSim.attachedPartSim.partId + ")");
+                                    if (log != null) log.buf.AppendLine(indent + "Attached part already visited, skipping (" + attachSim.attachedPartSim.name + ":" + attachSim.attachedPartSim.partId + ")");
                                 }
                                 else
                                 {
-                                    //if (log != null)
-                                    //    log.buf.AppendLine(indent + "Adding attached part as source (" + attachSim.attachedPartSim.name + ":" + attachSim.attachedPartSim.partId + ")");
+                                    if (log != null) log.buf.AppendLine(indent + "Adding attached part as source (" + attachSim.attachedPartSim.name + ":" + attachSim.attachedPartSim.partId + ")");
 
                                     attachSim.attachedPartSim.GetSourceSet(type, allParts, visited, allSources, log, indent);
                                 }
@@ -531,11 +540,7 @@
 
                 if (allSources.Count > lastCount)
                 {
-                    if (log != null)
-                    {
-                        log.buf.AppendLine(indent + "Returning " + (allSources.Count - lastCount) + " attached sources (" + this.name + ":" + this.partId + ")");
-                    }
-
+                    if (log != null) log.buf.AppendLine(indent + "Returning " + (allSources.Count - lastCount) + " attached sources (" + this.name + ":" + this.partId + ")");
                     return;
                 }
             }
@@ -550,13 +555,14 @@
                 {
                     allSources.Add(this);
 
-                    if (log != null)
-                    {
-                        log.buf.AppendLine(indent + "Returning enabled tank as only source (" + name + ":" + partId + ")");
-                    }
+                    if (log != null) log.buf.AppendLine(indent + "Returning enabled tank as only source (" + name + ":" + partId + ")");
                 }
 
                 return;
+            }
+            else
+            {
+                if (log != null) log.buf.AppendLine(indent + "Not fuel tank or disabled. HasType = " + resources.HasType(type) + "  FlowState = " + resourceFlowStates[type]);
             }
 
             // Rule 7: If the part is radially attached to another part and it is child of that part in the ship's tree structure, it scans its 
@@ -567,8 +573,7 @@
                 {
                     if (visited.Contains(parent))
                     {
-                        //if (log != null)
-                        //    log.buf.AppendLine(indent + "Parent part already visited, skipping (" + parent.name + ":" + parent.partId + ")");
+                        if (log != null) log.buf.AppendLine(indent + "Parent part already visited, skipping (" + parent.name + ":" + parent.partId + ")");
                     }
                     else
                     {
@@ -576,11 +581,7 @@
                         this.parent.GetSourceSet(type, allParts, visited, allSources, log, indent);
                         if (allSources.Count > lastCount)
                         {
-                            if (log != null)
-                            {
-                                log.buf.AppendLine(indent + "Returning " + (allSources.Count  - lastCount) + " parent sources (" + this.name + ":" + this.partId + ")");
-                            }
-
+                            if (log != null) log.buf.AppendLine(indent + "Returning " + (allSources.Count  - lastCount) + " parent sources (" + this.name + ":" + this.partId + ")");
                             return;
                         }
                     }
@@ -588,8 +589,7 @@
             }
 
             // Rule 8: If all preceding rules failed, part returns empty list.
-            //if (log != null)
-            //    log.buf.AppendLine(indent + "Returning empty set, no sources found (" + name + ":" + partId + ")");
+            if (log != null) log.buf.AppendLine(indent + "Returning empty set, no sources found (" + name + ":" + partId + ")");
 
             return;
         }
@@ -611,14 +611,22 @@
                     attachSim.attachedPartSim = null;
                 }
             }
+
+            // Loop through the fuel targets (fuel line sources)
+            for (int i = 0; i < this.fuelTargets.Count; i++)
+            {
+                PartSim fuelTargetSim = this.fuelTargets[i];
+                // If the part is in the set then "remove" it by clearing the PartSim reference
+                if (fuelTargetSim != null && partSims.Contains(fuelTargetSim))
+                {
+                    this.fuelTargets[i] = null;
+                }
+            }
         }
 
         public void SetupAttachNodes(Dictionary<Part, PartSim> partSimLookup, LogMsg log)
         {
-            if (log != null)
-            {
-                log.buf.AppendLine("SetupAttachNodes for " + name + ":" + partId + "");
-            }
+            if (log != null) log.buf.AppendLine("SetupAttachNodes for " + name + ":" + partId + "");
 
             attachNodes.Clear();
 
@@ -626,29 +634,20 @@
             {
                 AttachNode attachNode = part.attachNodes[i];
 
-                if (log != null)
-                {
-                    log.buf.AppendLine("AttachNode " + attachNode.id + " = " + (attachNode.attachedPart != null ? attachNode.attachedPart.partInfo.name : "null"));
-                }
+                if (log != null) log.buf.AppendLine("AttachNode " + attachNode.id + " = " + (attachNode.attachedPart != null ? attachNode.attachedPart.partInfo.name : "null"));
 
                 if (attachNode.attachedPart != null && attachNode.id != "Strut")
                 {
                     PartSim attachedSim;
                     if (partSimLookup.TryGetValue(attachNode.attachedPart, out attachedSim))
                     {
-                        if (log != null)
-                        {
-                            log.buf.AppendLine("Adding attached node " + attachedSim.name + ":" + attachedSim.partId + "");
-                        }
+                        if (log != null) log.buf.AppendLine("Adding attached node " + attachedSim.name + ":" + attachedSim.partId + "");
 
                         attachNodes.Add(AttachNodeSim.New(attachedSim, attachNode.id, attachNode.nodeType));
                     }
                     else
                     {
-                        if (log != null)
-                        {
-                            log.buf.AppendLine("No PartSim for attached part (" + attachNode.attachedPart.partInfo.name + ")");
-                        }
+                        if (log != null) log.buf.AppendLine("No PartSim for attached part (" + attachNode.attachedPart.partInfo.name + ")");
                     }
                 }
             }
@@ -662,19 +661,13 @@
                     PartSim targetSim;
                     if (partSimLookup.TryGetValue(p, out targetSim))
                     {
-                        if (log != null)
-                        {
-                            log.buf.AppendLine("Fuel target: " + targetSim.name + ":" + targetSim.partId);
-                        }
+                        if (log != null) log.buf.AppendLine("Fuel target: " + targetSim.name + ":" + targetSim.partId);
 
                         fuelTargets.Add(targetSim);
                     }
                     else
                     {
-                        if (log != null)
-                        {
-                            log.buf.AppendLine("No PartSim for fuel target (" + p.name + ")");
-                        }
+                        if (log != null) log.buf.AppendLine("No PartSim for fuel target (" + p.name + ")");
                     }
                 }
             }
@@ -687,17 +680,11 @@
                 parent = null;
                 if (partSimLookup.TryGetValue(part.parent, out parent))
                 {
-                    if (log != null)
-                    {
-                        log.buf.AppendLine("Parent part is " + parent.name + ":" + parent.partId);
-                    }
+                    if (log != null) log.buf.AppendLine("Parent part is " + parent.name + ":" + parent.partId);
                 }
                 else
                 {
-                    if (log != null)
-                    {
-                        log.buf.AppendLine("No PartSim for parent part (" + part.parent.partInfo.name + ")");
-                    }
+                    if (log != null) log.buf.AppendLine("No PartSim for parent part (" + part.parent.partInfo.name + ")");
                 }
             }
         }
@@ -735,43 +722,27 @@
             {
                 Transform trans = thrustTransforms[i];
 
-                if (log != null)
-                {
-                    log.buf.AppendFormat("Transform = ({0:g6}, {1:g6}, {2:g6})   length = {3:g6}\n", trans.forward.x, trans.forward.y, trans.forward.z, trans.forward.magnitude);
-                }
+                if (log != null) log.buf.AppendFormat("Transform = ({0:g6}, {1:g6}, {2:g6})   length = {3:g6}\n", trans.forward.x, trans.forward.y, trans.forward.z, trans.forward.magnitude);
 
                 thrustvec -= trans.forward;
             }
 
-            if (log != null)
-            {
-                log.buf.AppendFormat("ThrustVec  = ({0:g6}, {1:g6}, {2:g6})   length = {3:g6}\n", thrustvec.x, thrustvec.y, thrustvec.z, thrustvec.magnitude);
-            }
+            if (log != null) log.buf.AppendFormat("ThrustVec  = ({0:g6}, {1:g6}, {2:g6})   length = {3:g6}\n", thrustvec.x, thrustvec.y, thrustvec.z, thrustvec.magnitude);
 
             thrustvec.Normalize();
 
-            if (log != null)
-            {
-                log.buf.AppendFormat("ThrustVecN = ({0:g6}, {1:g6}, {2:g6})   length = {3:g6}\n", thrustvec.x, thrustvec.y, thrustvec.z, thrustvec.magnitude);
-            }
+            if (log != null) log.buf.AppendFormat("ThrustVecN = ({0:g6}, {1:g6}, {2:g6})   length = {3:g6}\n", thrustvec.x, thrustvec.y, thrustvec.z, thrustvec.magnitude);
 
             return thrustvec;
         }
 
         private int DecoupledInStage(Part thePart, int stage = -1)
         {
-            if (IsDecoupler(thePart))
-            {
-                if (thePart.inverseStage > stage)
-                {
-                    stage = thePart.inverseStage;
-                }
-            }
+            if (IsDecoupler(thePart) && thePart.inverseStage > stage)
+                stage = thePart.inverseStage;
 
             if (thePart.parent != null)
-            {
                 stage = DecoupledInStage(thePart.parent, stage);
-            }
 
             return stage;
         }

--- a/KerbalEngineer/VesselSimulator/ResourceContainer.cs
+++ b/KerbalEngineer/VesselSimulator/ResourceContainer.cs
@@ -150,6 +150,12 @@
             return density == 0d ? 0d : this.resources[type] * density;
         }
 
+        public double GetResourceCost(int type)
+        {
+            double unitCost = GetResourceUnitCost(type);
+            return unitCost == 0d ? 0d : this.resources[type] * unitCost;
+        }
+
         public static ResourceFlowMode GetResourceFlowMode(int type)
         {
             return PartResourceLibrary.Instance.GetDefinition(type).resourceFlowMode;
@@ -157,7 +163,7 @@
 
         public static ResourceTransferMode GetResourceTransferMode(int type)
         {
-            return PartResourceLibrary.Instance.GetDefinition(type).resourceTransferMode;;
+            return PartResourceLibrary.Instance.GetDefinition(type).resourceTransferMode;
         }
 
         public static float GetResourceDensity(int type)
@@ -169,5 +175,10 @@
         {
             return PartResourceLibrary.Instance.GetDefinition(type).name;
         }
+
+        public static double GetResourceUnitCost(int type)
+        {
+            return PartResourceLibrary.Instance.GetDefinition(type).unitCost;
+        }
     }
 }

--- a/KerbalEngineer/VesselSimulator/SimManager.cs
+++ b/KerbalEngineer/VesselSimulator/SimManager.cs
@@ -35,6 +35,7 @@
         #region Constants
 
         public const double RESOURCE_MIN = 0.0001;
+        public const double RESOURCE_PART_EMPTY_THRESH = 0.01;
 
         #endregion
 

--- a/KerbalEngineer/VesselSimulator/Simulation.cs
+++ b/KerbalEngineer/VesselSimulator/Simulation.cs
@@ -75,7 +75,6 @@
         public String vesselName;
         public VesselType vesselType;
         private WeightedVectorAverager vectorAverager = new WeightedVectorAverager();
-        private static ModuleProceduralFairing moduleProceduralFairing;
 
         public Simulation()
         {
@@ -119,7 +118,7 @@
                 for (int i = 0; i < allParts.Count; ++i)
                 {
                     PartSim partSim = allParts[i];
-                    vectorAverager.Add(partSim.centerOfMass, partSim.GetMass(currentStage));
+                    vectorAverager.Add(partSim.centerOfMass, partSim.GetMass(currentStage, true));
                 }
 
                 return vectorAverager.Get();
@@ -139,6 +138,7 @@
                 log.buf.AppendLine("PrepareSimulation started");
                 dumpTree = true;
             }
+            this._timer.Reset();
             this._timer.Start();
 
             // Store the parameters in members for ease of access in other functions
@@ -299,6 +299,7 @@
                 MonoBehaviour.print("RunSimulation started");
             }
 
+            this._timer.Reset();
             this._timer.Start();
 
             LogMsg log = null;
@@ -382,13 +383,14 @@
             // Create the array of stages that will be returned
             Stage[] stages = new Stage[this.currentStage + 1];
 
+            int startStage = currentStage;
+
             // Loop through the stages
             while (this.currentStage >= 0)
             {
                 if (log != null)
                 {
                     log.buf.AppendLine("Simulating stage " + this.currentStage);
-                    log.buf.AppendLine("ShipMass = " + this.ShipMass);
                     log.Flush();
                     this._timer.Reset();
                     this._timer.Start();
@@ -397,13 +399,18 @@
                 // Update active engines and resource drains
                 this.UpdateResourceDrains();
 
+                // Update the masses of the parts to correctly handle "no physics" parts
+                this.stageStartMass = this.UpdatePartMasses();
+
+                if (log != null)
+                    this.allParts[0].DumpPartToBuffer(log.buf, "", this.allParts);
+
                 // Create the Stage object for this stage
                 Stage stage = new Stage();
 
                 this.stageTime = 0d;
                 this.vecStageDeltaV = Vector3.zero;
 
-                this.stageStartMass = this.ShipMass;
                 this.stageStartCom = this.ShipCom;
 
                 this.stepStartMass = this.stageStartMass;
@@ -413,11 +420,11 @@
 
                 // Store various things in the Stage object
                 stage.thrust = this.totalStageThrust;
-                //MonoBehaviour.print("stage.thrust = " + stage.thrust);
+                if (log != null) log.buf.AppendLine("stage.thrust = " + stage.thrust);
                 stage.thrustToWeight = this.totalStageThrust / (this.stageStartMass * this.gravity);
                 stage.maxThrustToWeight = stage.thrustToWeight;
-                //MonoBehaviour.print("StageMass = " + stageStartMass);
-                //MonoBehaviour.print("Initial maxTWR = " + stage.maxThrustToWeight);
+                if (log != null) log.buf.AppendLine("StageMass = " + stageStartMass);
+                if (log != null) log.buf.AppendLine("Initial maxTWR = " + stage.maxThrustToWeight);
                 stage.actualThrust = this.totalStageActualThrust;
                 stage.actualThrustToWeight = this.totalStageActualThrust / (this.stageStartMass * this.gravity);
 
@@ -442,22 +449,31 @@
 
                 stage.thrustOffsetAngle = Math.Asin(sinThrustOffsetAngle) * 180 / Math.PI;
 
-                // Calculate the cost and mass of this stage and add all engines and tanks that are decoupled
-                // in the next stage to the dontStageParts list
+                // Calculate the total cost of the vessel at this point
+                stage.totalCost = 0d;
                 for (int i = 0; i < allParts.Count; ++i)
                 {
-                    PartSim partSim = allParts[i];
-
-                    if (partSim.decoupledInStage == this.currentStage - 1)
-                    {
-                        stage.cost += partSim.cost;
-                        stage.mass += partSim.GetStartMass();
-                    }
-
-                    if (partSim.hasVessel == false && partSim.isFairing && partSim.inverseStage == currentStage)
-                    {
-                        stage.mass += partSim.moduleMass;
-                    }
+                    if (this.currentStage > allParts[i].decoupledInStage)
+                        stage.totalCost += allParts[i].GetCost(currentStage);
+                }
+
+                // The total mass is simply the mass at the start of the stage
+                stage.totalMass = this.stageStartMass;
+
+                // If we have done a previous stage
+                if (currentStage < startStage)
+                {
+                    // Calculate what the previous stage's mass and cost were by subtraction
+                    Stage prev = stages[currentStage + 1];
+                    prev.cost = prev.totalCost - stage.totalCost;
+                    prev.mass = prev.totalMass - stage.totalMass;
+                }
+
+                // The above code will never run for the last stage so set those directly
+                if (currentStage == 0)
+                {
+                    stage.cost = stage.totalCost;
+                    stage.mass = stage.totalMass;
                 }
 
                 this.dontStageParts = dontStagePartsLists[this.currentStage];
@@ -620,8 +636,6 @@
                 // For each stage we total up the cost, mass, deltaV and time for this stage and all the stages above
                 for (int j = i; j >= 0; j--)
                 {
-                    stages[i].totalCost += stages[j].cost;
-                    stages[i].totalMass += stages[j].mass;
                     stages[i].totalDeltaV += stages[j].deltaV;
                     stages[i].totalTime += stages[j].time;
                     stages[i].partCount = i > 0 ? stages[i].totalPartCount - stages[i - 1].totalPartCount : stages[i].totalPartCount;
@@ -648,6 +662,45 @@
             FreePooledObject();
             
             return stages;
+        }
+
+        public double UpdatePartMasses()
+        {
+            for (int i = 0; i < this.allParts.Count; i++)
+            {
+                this.allParts[i].baseMass = this.allParts[i].realMass;
+                this.allParts[i].baseMassForCoM = this.allParts[i].realMass;
+            }
+
+            for (int i = 0; i < this.allParts.Count; i++)
+            {
+                PartSim part = this.allParts[i];
+                // If the part has a parent
+                if (part.parent != null)
+                {
+                    if (part.isNoPhysics)
+                    {
+                        if (part.parent.isNoPhysics && part.parent.parent != null)
+                        {
+                            part.baseMass = 0d;
+                            part.baseMassForCoM = 0d;
+                        }
+                        else
+                        {
+                            part.parent.baseMassForCoM += part.baseMassForCoM;
+                            part.baseMassForCoM = 0d;
+                        }
+                    }
+                }
+            }
+
+            double totalMass = 0d;
+            for (int i = 0; i < this.allParts.Count; i++)
+            {
+                totalMass += this.allParts[i].startMass = this.allParts[i].GetMass(currentStage);
+            }
+
+            return totalMass;
         }
 
         // Make sure we free them all, even if they should all be free already at this point

 Binary files a/Output/KerbalEngineer/KerbalEngineer.dll and b/Output/KerbalEngineer/KerbalEngineer.dll differ
--- a/Output/KerbalEngineer/KerbalEngineer.version
+++ b/Output/KerbalEngineer/KerbalEngineer.version
@@ -5,13 +5,13 @@
 	{
 		"MAJOR":1,
 		"MINOR":0,
-		"PATCH":16,
-		"BUILD":6
+		"PATCH":17,
+		"BUILD":0
 	},
 	"KSP_VERSION":
 	{
 		"MAJOR":1,
 		"MINOR":0,
-		"PATCH":2
+		"PATCH":4
 	}
 }