Fixed issue where physically insignificant part mass was not being correctly cascaded down through parent parts.
Fixed issue where physically insignificant part mass was not being correctly cascaded down through parent parts.

--- a/Documents/CHANGES.txt
+++ b/Documents/CHANGES.txt
@@ -1,22 +1,33 @@
+1.0.18.0
+    Added: Orbital readouts - "Speed at Periapsis" and "Speed at Apoapsis". (Padishar)
+    Added: Manoeuvre readouts - "Post-burn Apoapsis" and "Post-burn Periapsis". (Padishar)
+    Fixed: Synched the minimum simulation time sliders and stopped them from snapping back after 999ms. (saybur)
+    Fixed: Added workaround for the bug in Vessel.horizontalSrfSpeed (Padishar)
+    Fixed: Physically insignificant part masses were not correctly being cascaded down through its parents.
+
 1.0.17.0
     Added: 'Mach Number' readout under the 'Surface' category and included it on the default surface HUD.
+    Added: Stock sections in the Flight Engineer can now become HUDs.
     Added 'Thermal' readouts category including:
         Internal Flux
         Convection Flux
         Radiation Flux
         Critical Part Name
         Critical Part Temperature
-        Critical Part Percentage of Max Temperature
+        Critical Part Skin Temperature
+        Critical Part Thermal Percentage of Max Temperature
         Hottest Part Name
         Hottest Part Temperature
+        Hottest Part Skin Temperature
         Coldest Part Name
         Coldest Part Temperature
+        Coldest Part Skin Temperature
 
     Changed: Mach on the Build Engineer now accurate to 2 decimal places.
     Changed: Max mach in the Build Engineer defaults to 1.00 even when no jet engines are present.
-    Changed: Increased eccentricity readout to 5 decimal places.  
-    Changed: Implemented Sarbian's object pooling. 
-    Changed: How the default selected body is assigned to 'Planitarium.Home'.
+    Changed: Increased eccentricity readout to 5 decimal places.
+    Changed: Implemented Sarbian's object pooling.
+    Changed: The default selected body is now assigned via 'Planitarium.Home'.
     Changed: HUDs to clamp fully inside the screen instead of allowing them to run off the edge by a certain amount.
     Fixed: Physically insignificant part mass is now associated with the parent part.
     Fixed: Longitude and Latitude readouts now use a KER formatter instead of Squad's incorrect implementation.
@@ -69,7 +80,7 @@
 
 1.0.15.1, 13-02-2015
     Rebuild
-    
+
 1.0.15.0, 08-02-2015
     Padishar's Fixes:
         Added: Support KIDS ISP thrust correction.
@@ -79,7 +90,7 @@
 
 1.0.14.1, 28-12-2014
     Fixed: Missing texture on the ER-7500 model.
-    
+
 1.0.14.0, 28-12-2014
     Added: Career mode that limits the Flight Engineer by:
         - Requiring an Engineer Kerbal of any level, or placement of an Engineer Chip or ER-7500 part.
@@ -199,7 +210,7 @@
     Added: New readout to the surface category:
         - Vertical Acceleration
         - Horizontal Acceleration
-    
+
     Changed: Atmospheric efficiency readout now shows as a percentage.
     Changed: Atmospheric settings (pressure/velocity) in the editor condensed onto a single line.
     Fixed: Bug where the overlays in the editor would stay open outside of parts screen.
@@ -356,6 +367,7 @@
     Added: Stock toolbar support in the Flight Engineer.
     Changed: Orbital Period has higher precision.
     Fixed: Various NullRefs in editor window and overlay.
-    
+
 1.0.0.0, 24-07-2014
     Initial release for public testing.
+

--- a/KerbalEngineer/Control/ControlCentre.cs
+++ b/KerbalEngineer/Control/ControlCentre.cs
@@ -142,7 +142,7 @@
             try
             {
                 GUI.skin = null;
-                this.position = GUILayout.Window(this.GetInstanceID(), this.position, this.Window, "KERBAL ENGINEER REDUX " + EngineerGlobals.AssemblyVersion + " - CONTROL CENTRE", HighLogic.Skin.window);
+                this.position = GUILayout.Window(this.GetInstanceID(), this.position, this.Window, "KERBAL ENGINEER REDUX " + EngineerGlobals.ASSEMBLY_VERSION + " - CONTROL CENTRE", HighLogic.Skin.window);
                 this.CentreWindow();
             }
             catch (Exception ex)

--- a/KerbalEngineer/Editor/BuildAdvanced.cs
+++ b/KerbalEngineer/Editor/BuildAdvanced.cs
@@ -215,7 +215,7 @@
                 }
 
                 // Change the window title based on whether in compact mode or not.
-                title = !compactMode ? "KERBAL ENGINEER REDUX " + EngineerGlobals.AssemblyVersion : "K.E.R. " + EngineerGlobals.AssemblyVersion;
+                title = !compactMode ? "KERBAL ENGINEER REDUX " + EngineerGlobals.ASSEMBLY_VERSION : "K.E.R. " + EngineerGlobals.ASSEMBLY_VERSION;
 
                 // Reset the window size when the staging or something else has changed.
                 stagesLength = stages.Length;
@@ -523,12 +523,12 @@
             GUILayout.EndHorizontal();
 
             GUILayout.BeginHorizontal();
-            GUILayout.Label("Simulate using vectored thrust values:");
+            GUILayout.Label("Simulate using vectored thrust values:", settingStyle);
             SimManager.vectoredThrust = GUILayout.Toggle(SimManager.vectoredThrust, "ENABLED", buttonStyle, GUILayout.Width(100.0f * GuiDisplaySize.Offset));
             GUILayout.EndHorizontal();
 
             GUILayout.BeginHorizontal();
-            GUILayout.Label("Verbose Simulation Log:");
+            GUILayout.Label("Verbose Simulation Log:", settingStyle);
             SimManager.logOutput = GUILayout.Toggle(SimManager.logOutput, "ENABLED", buttonStyle, GUILayout.Width(100.0f * GuiDisplaySize.Offset));
             GUILayout.EndHorizontal();
 
@@ -563,9 +563,9 @@
             }
             GUILayout.EndHorizontal();
 
-            GUILayout.Label("Minimum delay between simulations: " + SimManager.minSimTime.Milliseconds + "ms", settingStyle);
+            GUILayout.Label("Minimum delay between simulations: " + SimManager.minSimTime.TotalMilliseconds + "ms", settingStyle);
             GUI.skin = HighLogic.Skin;
-            SimManager.minSimTime = new TimeSpan(0, 0, 0, 0, (int)GUILayout.HorizontalSlider(SimManager.minSimTime.Milliseconds, 0, 2000.0f));
+            SimManager.minSimTime = TimeSpan.FromMilliseconds(GUILayout.HorizontalSlider((float)SimManager.minSimTime.TotalMilliseconds, 0, 2000.0f));
             GUI.skin = null;
         }
 

--- a/KerbalEngineer/EngineerGlobals.cs
+++ b/KerbalEngineer/EngineerGlobals.cs
@@ -1,7 +1,5 @@
 // 
-//     Kerbal Engineer Redux
-// 
-//     Copyright (C) 2014 CYBUTEK
+//     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
 //     it under the terms of the GNU General Public License as published by
@@ -17,42 +15,31 @@
 //     along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // 
 
-#region Using Directives
-
-using System.IO;
-using System.Reflection;
-
-#endregion
-
 namespace KerbalEngineer
 {
-    public class EngineerGlobals
+    using System.IO;
+    using System.Reflection;
+
+    public static class EngineerGlobals
     {
-        #region Constants
-
         /// <summary>
         ///     Current version of the Kerbal Engineer assembly.
         /// </summary>
-        public const string AssemblyVersion = "1.0.16.6";
-
-        #endregion
-
-        #region Fields
+        public const string ASSEMBLY_VERSION = "1.0.18.0";
 
         private static string assemblyFile;
         private static string assemblyName;
         private static string assemblyPath;
-
-        #endregion
-
-        #region Properties
 
         /// <summary>
         ///     Gets the Kerbal Engineer assembly's path including the file name.
         /// </summary>
         public static string AssemblyFile
         {
-            get { return assemblyFile ?? (assemblyFile = Assembly.GetExecutingAssembly().Location); }
+            get
+            {
+                return assemblyFile ?? (assemblyFile = Assembly.GetExecutingAssembly().Location);
+            }
         }
 
         /// <summary>
@@ -60,7 +47,10 @@
         /// </summary>
         public static string AssemblyName
         {
-            get { return assemblyName ?? (assemblyName = new FileInfo(AssemblyFile).Name); }
+            get
+            {
+                return assemblyName ?? (assemblyName = new FileInfo(AssemblyFile).Name);
+            }
         }
 
         /// <summary>
@@ -68,9 +58,10 @@
         /// </summary>
         public static string AssemblyPath
         {
-            get { return assemblyPath ?? (assemblyPath = AssemblyFile.Replace(new FileInfo(AssemblyFile).Name, "")); }
+            get
+            {
+                return assemblyPath ?? (assemblyPath = AssemblyFile.Replace(new FileInfo(AssemblyFile).Name, ""));
+            }
         }
-
-        #endregion
     }
 }

--- a/KerbalEngineer/Flight/DisplayStack.cs
+++ b/KerbalEngineer/Flight/DisplayStack.cs
@@ -214,7 +214,7 @@
         /// </summary>
         private void DrawControlBar()
         {
-            GUILayout.Label("FLIGHT ENGINEER " + EngineerGlobals.AssemblyVersion, this.titleStyle);
+            GUILayout.Label("FLIGHT ENGINEER " + EngineerGlobals.ASSEMBLY_VERSION, this.titleStyle);
 
             this.DrawControlBarButtons(SectionLibrary.StockSections);
             this.DrawControlBarButtons(SectionLibrary.CustomSections);

--- a/KerbalEngineer/Flight/Readouts/Miscellaneous/SimulationDelay.cs
+++ b/KerbalEngineer/Flight/Readouts/Miscellaneous/SimulationDelay.cs
@@ -51,7 +51,7 @@
             GUILayout.BeginHorizontal();
             GUILayout.Label("Sim Delay", this.NameStyle);
             GUI.skin = HighLogic.Skin;
-            SimManager.minSimTime = new TimeSpan(0, 0, 0, 0, (int)GUILayout.HorizontalSlider(SimManager.minSimTime.Milliseconds, 0, 1000.0f));
+            SimManager.minSimTime = TimeSpan.FromMilliseconds(GUILayout.HorizontalSlider((float)SimManager.minSimTime.TotalMilliseconds, 0, 2000.0f));
             GUI.skin = null;
             GUILayout.EndHorizontal();
         }

--- a/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/ManoeuvreProcessor.cs
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/ManoeuvreProcessor.cs
@@ -63,6 +63,10 @@
 
         public static double NormalDeltaV { get; private set; }
 
+        public static double PostBurnAp { get; private set; }
+
+        public static double PostBurnPe { get; private set; }
+
         public static double ProgradeDeltaV { get; private set; }
 
         public static double RadialDeltaV { get; private set; }
@@ -110,6 +114,8 @@
             NormalDeltaV = deltaV.y;
             RadialDeltaV = deltaV.x;
             TotalDeltaV = node.GetBurnVector(FlightGlobals.ship_orbit).magnitude;
+            PostBurnAp = node.nextPatch != null ? node.nextPatch.ApA : 0;
+            PostBurnPe = node.nextPatch != null ? node.nextPatch.PeA : 0;
 
             UniversalTime = FlightGlobals.ActiveVessel.patchedConicSolver.maneuverNodes[0].UT;
             AngleToPrograde = FlightGlobals.ActiveVessel.patchedConicSolver.maneuverNodes[0].patch.GetAngleToPrograde(UniversalTime);

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/PostBurnApoapsis.cs
@@ -1,1 +1,69 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using System;
+
+using KerbalEngineer.Extensions;
+using KerbalEngineer.Flight.Sections;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Orbital.ManoeuvreNode
+{
+    public class PostBurnApoapsis : ReadoutModule
+    {
+        #region Constructors
+
+        public PostBurnApoapsis()
+        {
+            this.Name = "Post-burn Apoapsis";
+            this.Category = ReadoutCategory.GetCategory("Orbital");
+            this.HelpString = String.Empty;
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            if (!ManoeuvreProcessor.ShowDetails)
+            {
+                return;
+            }
+
+            this.DrawLine("Post-burn Apoapsis", ManoeuvreProcessor.PostBurnAp.ToDistance(), section.IsHud);
+        }
+
+        public override void Reset()
+        {
+            ManoeuvreProcessor.Reset();
+        }
+
+        public override void Update()
+        {
+            ManoeuvreProcessor.RequestUpdate();
+        }
+
+        #endregion
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Orbital/ManoeuvreNode/PostBurnPeriapsis.cs
@@ -1,1 +1,69 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using System;
+
+using KerbalEngineer.Extensions;
+using KerbalEngineer.Flight.Sections;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Orbital.ManoeuvreNode
+{
+    public class PostBurnPeriapsis : ReadoutModule
+    {
+        #region Constructors
+
+        public PostBurnPeriapsis()
+        {
+            this.Name = "Post-burn Periapsis";
+            this.Category = ReadoutCategory.GetCategory("Orbital");
+            this.HelpString = String.Empty;
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            if (!ManoeuvreProcessor.ShowDetails)
+            {
+                return;
+            }
+
+            this.DrawLine("Post-burn Periapsis", ManoeuvreProcessor.PostBurnPe.ToDistance(), section.IsHud);
+        }
+
+        public override void Reset()
+        {
+            ManoeuvreProcessor.Reset();
+        }
+
+        public override void Update()
+        {
+            ManoeuvreProcessor.RequestUpdate();
+        }
+
+        #endregion
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Orbital/SpeedAtApoapsis.cs
@@ -1,1 +1,68 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using System;
+using KerbalEngineer.Flight.Sections;
+using KerbalEngineer.Helpers;
+using KerbalEngineer.Extensions;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Orbital
+{
+    public class SpeedAtApoapsis : ReadoutModule
+    {
+        #region Constructors
+
+        public SpeedAtApoapsis()
+        {
+            this.Name = "Speed at Apoapsis";
+            this.Category = ReadoutCategory.GetCategory("Orbital");
+            this.HelpString = "Shows the orbital speed of the vessel when at apoapsis, the highest point of the orbit.";
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            // Vis-viva: v^2 = GM(2/r - 1/a)
+            // All this is easily got from the ships orbit (and reference body)
+            String str;
+            Orbit orbit = FlightGlobals.ship_orbit;
+            if (orbit.eccentricity > 1.0)
+                str = "---m/s";
+            else
+            {
+                double speedsqr = orbit.referenceBody.gravParameter * ((2 / orbit.ApR) - (1 / orbit.semiMajorAxis));
+                if (Double.IsNaN(speedsqr) || speedsqr < 0)
+                    str = "---m/s";     // Don't think this is possible barring bugs in the Orbit class
+                else
+                    str = Math.Sqrt(speedsqr).ToSpeed();
+            }
+            this.DrawLine(str, section.IsHud);
+        }
+
+        #endregion
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Orbital/SpeedAtPeriapsis.cs
@@ -1,1 +1,64 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using System;
+using KerbalEngineer.Flight.Sections;
+using KerbalEngineer.Helpers;
+using KerbalEngineer.Extensions;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Orbital
+{
+    public class SpeedAtPeriapsis : ReadoutModule
+    {
+        #region Constructors
+
+        public SpeedAtPeriapsis()
+        {
+            this.Name = "Speed at Periapsis";
+            this.Category = ReadoutCategory.GetCategory("Orbital");
+            this.HelpString = "Shows the orbital speed of the vessel when at periapsis, the lowest point of the orbit.";
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            // Vis-viva: v^2 = GM(2/r - 1/a)
+            // All this is easily got from the ships orbit (and reference body)
+            String str;
+            Orbit orbit = FlightGlobals.ship_orbit;
+            double oneovera = (orbit.eccentricity == 1) ? 0 : (1 / orbit.semiMajorAxis);
+            double speedsqr = orbit.referenceBody.gravParameter * ((2 / orbit.PeR) - oneovera);
+            if (Double.IsNaN(speedsqr) || speedsqr < 0)
+                str = "---m/s";
+            else
+                str = Math.Sqrt(speedsqr).ToSpeed();
+            this.DrawLine(str, section.IsHud);
+        }
+
+        #endregion
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Orbital/TimeToAtmosphere.cs
@@ -1,1 +1,99 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2014 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+#region Using Directives
+
+using System;
+using KerbalEngineer.Flight.Sections;
+using KerbalEngineer.Helpers;
+
+#endregion
+
+namespace KerbalEngineer.Flight.Readouts.Orbital
+{
+    public class TimeToAtmosphere : ReadoutModule
+    {
+        //private LogMsg log = new LogMsg();
+        
+        #region Constructors
+
+        public TimeToAtmosphere()
+        {
+            this.Name = "Time to Atmosphere";
+            this.Category = ReadoutCategory.GetCategory("Orbital");
+            this.HelpString = "Shows the time until the vessel enters or leaves atmosphere.";
+            this.IsDefault = false;
+        }
+
+        #endregion
+
+        #region Methods: public
+
+        public override void Draw(SectionModule section)
+        {
+            String str;
+            Orbit orbit = FlightGlobals.ship_orbit;
+
+            if (orbit.referenceBody.atmosphere && orbit.PeA < orbit.referenceBody.atmosphereDepth)
+            {
+                double tA = orbit.TrueAnomalyAtRadius(orbit.referenceBody.atmosphereDepth + orbit.referenceBody.Radius);
+                //log.buf.AppendFormat("tA = {0}\n", tA);
+                double utTime = Planetarium.GetUniversalTime();
+                //log.buf.AppendFormat("utTime = {0}\n", utTime);
+                double timeAtRad1 = orbit.GetUTforTrueAnomaly(tA, orbit.period * 0.5);
+                //log.buf.AppendFormat("timeAtRad1 = {0}\n", timeAtRad1);
+                if (timeAtRad1 < utTime)
+                {
+                    timeAtRad1 += orbit.period;
+                    //log.buf.AppendFormat("timeAtRad1 = {0}\n", timeAtRad1);
+                }
+                double timeAtRad2 = orbit.GetUTforTrueAnomaly(-tA, orbit.period * 0.5);
+                //log.buf.AppendFormat("timeAtRad2 = {0}\n", timeAtRad2);
+                if (timeAtRad2 < utTime)
+                {
+                    timeAtRad2 += orbit.period;
+                    //log.buf.AppendFormat("timeAtRad2 = {0}\n", timeAtRad2);
+                }
+                double time = Math.Min(timeAtRad1, timeAtRad2) - utTime;
+                //log.buf.AppendFormat("time = {0}\n", time);
+
+                if (Double.IsNaN(time))
+                {
+                    str = "---s";
+                    //log.buf.AppendLine("time is NaN");
+                }
+                else
+                {
+                    str = TimeFormatter.ConvertToString(time);
+                    //log.buf.AppendFormat("str = {0}\n", str);
+                }
+            }
+            else
+            {
+                str = "---s";
+                //log.buf.AppendLine("no atmosphere or pe > atmosphere");
+            }
+
+            //log.Flush();
+            this.DrawLine(str, section.IsHud);
+        }
+
+        #endregion
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/ReadoutLibrary.cs
+++ b/KerbalEngineer/Flight/Readouts/ReadoutLibrary.cs
@@ -1,6 +1,4 @@
 // 
-//     Kerbal Engineer Redux
-// 
 //     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
@@ -93,6 +91,11 @@
                 readouts.Add(new NodeTimeToHalfBurn());
                 readouts.Add(new NodeAngleToPrograde());
                 readouts.Add(new NodeAngleToRetrograde());
+                readouts.Add(new PostBurnApoapsis());
+                readouts.Add(new PostBurnPeriapsis());
+                readouts.Add(new SpeedAtApoapsis());
+                readouts.Add(new SpeedAtPeriapsis());
+                readouts.Add(new TimeToAtmosphere());
 
                 // Surface
                 readouts.Add(new AltitudeSeaLevel());
@@ -171,11 +174,14 @@
                 readouts.Add(new RadiationFlux());
                 readouts.Add(new CriticalPart());
                 readouts.Add(new CriticalTemperature());
-                readouts.Add(new CriticalPercentage());
+                readouts.Add(new CriticalSkinTemperature());
+                readouts.Add(new CriticalThermalPercentage());
                 readouts.Add(new HottestPart());
                 readouts.Add(new HottestTemperature());
+                readouts.Add(new HottestSkinTemperature());
                 readouts.Add(new CoolestPart());
                 readouts.Add(new CoolestTemperature());
+                readouts.Add(new CoolestSkinTemperature());
 
                 // Misc
                 readouts.Add(new Separator());

--- a/KerbalEngineer/Flight/Readouts/Surface/HorizontalSpeed.cs
+++ b/KerbalEngineer/Flight/Readouts/Surface/HorizontalSpeed.cs
@@ -21,6 +21,7 @@
 
 using KerbalEngineer.Extensions;
 using KerbalEngineer.Flight.Sections;
+using System;
 
 #endregion
 
@@ -44,7 +45,11 @@
 
         public override void Draw(SectionModule section)
         {
-            this.DrawLine(FlightGlobals.ActiveVessel.horizontalSrfSpeed.ToSpeed(), section.IsHud);
+            // Used to do this but the bug-fix to horizontalSrfSpeed in KSP 1.0.3 actually made it worse so workaround
+            //this.DrawLine(FlightGlobals.ActiveVessel.horizontalSrfSpeed.ToSpeed(), section.IsHud);
+            var ves = FlightGlobals.ActiveVessel;
+            double horizSpeed = Math.Sqrt(ves.srfSpeed * ves.srfSpeed - ves.verticalSpeed * ves.verticalSpeed);
+            this.DrawLine(horizSpeed.ToSpeed(), section.IsHud);
         }
 
         #endregion

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CoolestSkinTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class CoolestSkinTemperature : ReadoutModule
+    {
+        public CoolestSkinTemperature()
+        {
+            Name = "Coolest Skin Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.CoolestSkinTemperature, ThermalProcessor.CoolestSkinTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/Thermal/CriticalPercentage.cs
+++ /dev/null
@@ -1,53 +1,1 @@
-// 
-//     Kerbal Engineer Redux
-// 
-//     Copyright (C) 2015 CYBUTEK
-// 
-//     This program is free software: you can redistribute it and/or modify
-//     it under the terms of the GNU General Public License as published by
-//     the Free Software Foundation, either version 3 of the License, or
-//     (at your option) any later version.
-// 
-//     This program is distributed in the hope that it will be useful,
-//     but WITHOUT ANY WARRANTY; without even the implied warranty of
-//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-//     GNU General Public License for more details.
-// 
-//     You should have received a copy of the GNU General Public License
-//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
-// 
 
-namespace KerbalEngineer.Flight.Readouts.Thermal
-{
-    using Extensions;
-    using Sections;
-
-    public class CriticalPercentage : ReadoutModule
-    {
-        public CriticalPercentage()
-        {
-            Name = "Critical Percentage";
-            Category = ReadoutCategory.GetCategory("Thermal");
-            HelpString = string.Empty;
-            IsDefault = true;
-        }
-
-        public override void Draw(SectionModule section)
-        {
-            if (ThermalProcessor.ShowDetails)
-            {
-                DrawLine(ThermalProcessor.CriticalTemperaturePercentage.ToPercent(), section.IsHud);
-            }
-        }
-
-        public override void Reset()
-        {
-            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
-        }
-
-        public override void Update()
-        {
-            ThermalProcessor.RequestUpdate();
-        }
-    }
-}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CriticalSkinTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class CriticalSkinTemperature : ReadoutModule
+    {
+        public CriticalSkinTemperature()
+        {
+            Name = "Critical Skin Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.CriticalSkinTemperature, ThermalProcessor.CriticalSkinTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/CriticalThermalPercentage.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Extensions;
+    using Sections;
+
+    public class CriticalThermalPercentage : ReadoutModule
+    {
+        public CriticalThermalPercentage()
+        {
+            Name = "Critical Thermal Percentage";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(ThermalProcessor.CriticalTemperaturePercentage.ToPercent(), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- /dev/null
+++ b/KerbalEngineer/Flight/Readouts/Thermal/HottestSkinTemperature.cs
@@ -1,1 +1,53 @@
+// 
+//     Kerbal Engineer Redux
+// 
+//     Copyright (C) 2015 CYBUTEK
+// 
+//     This program is free software: you can redistribute it and/or modify
+//     it under the terms of the GNU General Public License as published by
+//     the Free Software Foundation, either version 3 of the License, or
+//     (at your option) any later version.
+// 
+//     This program is distributed in the hope that it will be useful,
+//     but WITHOUT ANY WARRANTY; without even the implied warranty of
+//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//     GNU General Public License for more details.
+// 
+//     You should have received a copy of the GNU General Public License
+//     along with this program.  If not, see <http://www.gnu.org/licenses/>.
+// 
 
+namespace KerbalEngineer.Flight.Readouts.Thermal
+{
+    using Helpers;
+    using Sections;
+
+    public class HottestSkinTemperature : ReadoutModule
+    {
+        public HottestSkinTemperature()
+        {
+            Name = "Hottest Skin Temperature";
+            Category = ReadoutCategory.GetCategory("Thermal");
+            HelpString = string.Empty;
+            IsDefault = true;
+        }
+
+        public override void Draw(SectionModule section)
+        {
+            if (ThermalProcessor.ShowDetails)
+            {
+                DrawLine(Units.ToTemperature(ThermalProcessor.HottestSkinTemperature, ThermalProcessor.HottestSkinTemperatureMax), section.IsHud);
+            }
+        }
+
+        public override void Reset()
+        {
+            FlightEngineerCore.Instance.AddUpdatable(ThermalProcessor.Instance);
+        }
+
+        public override void Update()
+        {
+            ThermalProcessor.RequestUpdate();
+        }
+    }
+}

--- a/KerbalEngineer/Flight/Readouts/Thermal/ThermalProcessor.cs
+++ b/KerbalEngineer/Flight/Readouts/Thermal/ThermalProcessor.cs
@@ -1,6 +1,4 @@
 // 
-//     Kerbal Engineer Redux
-// 
 //     Copyright (C) 2015 CYBUTEK
 // 
 //     This program is free software: you can redistribute it and/or modify
@@ -19,6 +17,8 @@
 
 namespace KerbalEngineer.Flight.Readouts.Thermal
 {
+    using System;
+
     public class ThermalProcessor : IUpdatable, IUpdateRequest
     {
         private static readonly ThermalProcessor instance = new ThermalProcessor();
@@ -27,10 +27,16 @@
         {
             HottestTemperature = 0.0;
             HottestTemperatureMax = 0.0;
+            HottestSkinTemperature = 0.0;
+            HottestSkinTemperatureMax = 0.0;
             CoolestTemperature = 0.0;
             CoolestTemperatureMax = 0.0;
+            CoolestSkinTemperature = 0.0;
+            CoolestSkinTemperatureMax = 0.0;
             CriticalTemperature = 0.0;
             CriticalTemperatureMax = 0.0;
+            CriticalSkinTemperature = 0.0;
+            CriticalSkinTemperatureMax = 0.0;
             HottestPartName = string.Empty;
             CoolestPartName = string.Empty;
             CriticalPartName = string.Empty;
@@ -40,11 +46,19 @@
 
         public static string CoolestPartName { get; private set; }
 
+        public static double CoolestSkinTemperature { get; private set; }
+
+        public static double CoolestSkinTemperatureMax { get; private set; }
+
         public static double CoolestTemperature { get; private set; }
 
         public static double CoolestTemperatureMax { get; private set; }
 
         public static string CriticalPartName { get; private set; }
+
+        public static double CriticalSkinTemperature { get; private set; }
+
+        public static double CriticalSkinTemperatureMax { get; private set; }
 
         public static double CriticalTemperature { get; private set; }
 
@@ -53,6 +67,10 @@
         public static double CriticalTemperaturePercentage { get; private set; }
 
         public static string HottestPartName { get; private set; }
+
+        public static double HottestSkinTemperature { get; private set; }
+
+        public static double HottestSkinTemperatureMax { get; private set; }
 
         public static double HottestTemperature { get; private set; }
 
@@ -69,14 +87,8 @@
         public static double InternalFlux { get; private set; }
 
         public static double RadiationFlux { get; private set; }
+
         public static bool ShowDetails { get; private set; }
-
-        public bool UpdateRequested { get; set; }
-
-        public static void RequestUpdate()
-        {
-            instance.UpdateRequested = true;
-        }
 
         public void Update()
         {
@@ -92,8 +104,11 @@
             RadiationFlux = 0.0;
             InternalFlux = 0.0;
             HottestTemperature = 0.0;
+            HottestSkinTemperature = 0.0;
             CoolestTemperature = double.MaxValue;
+            CoolestSkinTemperature = double.MaxValue;
             CriticalTemperature = double.MaxValue;
+            CriticalSkinTemperature = double.MaxValue;
             CriticalTemperaturePercentage = 0.0;
             HottestPartName = string.Empty;
             CoolestPartName = string.Empty;
@@ -107,26 +122,40 @@
                 RadiationFlux = RadiationFlux + part.thermalRadiationFlux;
                 InternalFlux = InternalFlux + part.thermalInternalFluxPrevious;
 
-                if (part.temperature > HottestTemperature)
+                if (part.temperature > HottestTemperature || part.skinTemperature > HottestSkinTemperature)
                 {
                     HottestTemperature = part.temperature;
                     HottestTemperatureMax = part.maxTemp;
+                    HottestSkinTemperature = part.skinTemperature;
+                    HottestSkinTemperatureMax = part.skinMaxTemp;
                     HottestPartName = part.partInfo.title;
                 }
-                if (part.temperature < CoolestTemperature)
+                if (part.temperature < CoolestTemperature || part.skinTemperature < CoolestSkinTemperature)
                 {
                     CoolestTemperature = part.temperature;
                     CoolestTemperatureMax = part.maxTemp;
+                    CoolestSkinTemperature = part.skinTemperature;
+                    CoolestSkinTemperatureMax = part.skinMaxTemp;
                     CoolestPartName = part.partInfo.title;
                 }
-                if (part.temperature / part.maxTemp > CriticalTemperaturePercentage)
+
+                if (part.temperature / part.maxTemp > CriticalTemperaturePercentage || part.skinTemperature / part.skinMaxTemp > CriticalTemperaturePercentage)
                 {
                     CriticalTemperature = part.temperature;
                     CriticalTemperatureMax = part.maxTemp;
-                    CriticalTemperaturePercentage = part.temperature / part.maxTemp;
+                    CriticalSkinTemperature = part.skinTemperature;
+                    CriticalSkinTemperatureMax = part.skinMaxTemp;
+                    CriticalTemperaturePercentage = Math.Max(part.temperature / part.maxTemp, part.skinTemperature / part.skinMaxTemp);
                     CriticalPartName = part.partInfo.title;
                 }
             }
         }
+
+        public bool UpdateRequested { get; set; }
+
+        public static void RequestUpdate()
+        {
+            instance.UpdateRequested = true;
+        }
     }
 }

--- a/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirDemandSupply.cs
+++ b/KerbalEngineer/Flight/Readouts/Vessel/IntakeAirDemandSupply.cs
@@ -55,10 +55,11 @@
             var demand = 0.0;
             foreach (var part in FlightGlobals.ActiveVessel.Parts)
             {
-                if (part.Modules.Contains("ModuleEngines"))
+                for (int i = 0; i < part.Modules.Count; i++)
                 {
-                    var engine = part.Modules["ModuleEngines"] as ModuleEngines;
-                    if (engine.isOperational)
+                    PartModule partmod = part.Modules[i];
+                    var engine = partmod as ModuleEngines;
+                    if (engine != null && engine.isOperational)
                     {
                         demand += engine.propellants
                             .Where(p => p.name == "IntakeAir")

--- a/KerbalEngineer/Flight/Sections/SectionEditor.cs
+++ b/KerbalEngineer/Flight/Sections/SectionEditor.cs
@@ -215,15 +215,18 @@
             this.ParentSection.Name = GUILayout.TextField(this.ParentSection.Name, this.textStyle);
             var isShowingInControlBar = !string.IsNullOrEmpty(this.ParentSection.Abbreviation);
             this.ParentSection.Abbreviation = GUILayout.TextField(this.ParentSection.Abbreviation, this.textStyle, GUILayout.Width(75.0f));
+
+            ParentSection.IsHud = GUILayout.Toggle(this.ParentSection.IsHud, "HUD", this.readoutButtonStyle, GUILayout.Width(50.0f));
+            if (ParentSection.IsHud)
+            {
+                this.ParentSection.IsHudBackground = GUILayout.Toggle(this.ParentSection.IsHudBackground, "BG", this.readoutButtonStyle, GUILayout.Width(50.0f));
+            }
+
             if (this.ParentSection.IsCustom)
             {
                 if (isShowingInControlBar && string.IsNullOrEmpty(this.ParentSection.Abbreviation))
                 {
                     DisplayStack.Instance.RequestResize();
-                }
-                if (this.ParentSection.IsHud = GUILayout.Toggle(this.ParentSection.IsHud, "HUD", this.readoutButtonStyle, GUILayout.Width(50.0f)))
-                {
-                    this.ParentSection.IsHudBackground = GUILayout.Toggle(this.ParentSection.IsHudBackground, "BG", this.readoutButtonStyle, GUILayout.Width(50.0f));
                 }
 
                 if (GUILayout.Button("DELETE SECTION", this.readoutButtonStyle, GUILayout.Width(150.0f)))

--- a/KerbalEngineer/Flight/Sections/SectionLibrary.cs
+++ b/KerbalEngineer/Flight/Sections/SectionLibrary.cs
@@ -72,9 +72,10 @@
             {
                 Name = "THERMAL",
                 Abbreviation = "HEAT",
-                ReadoutModules = ReadoutLibrary.GetCategory(ReadoutCategory.GetCategory("Thermal")).Where(r => r.IsDefault).ToList()
-            });
-
+                ReadoutModules = ReadoutLibrary.GetCategory(ReadoutCategory.GetCategory("Thermal")).Where(r => r.IsDefault).ToList(),
+                IsCustom = true
+            });
+            
             SectionModule hud1 = new SectionModule
             {
                 Name = "HUD 1",

--- a/KerbalEngineer/KerbalEngineer.csproj
+++ b/KerbalEngineer/KerbalEngineer.csproj
@@ -71,11 +71,21 @@
     <Compile Include="Flight\Readouts\Orbital\ManoeuvreNode\NodeAngleToPrograde.cs" />
     <Compile Include="Flight\Readouts\Orbital\ManoeuvreNode\NodeTotalDeltaV.cs" />
     <Compile Include="Flight\Readouts\Orbital\ManoeuvreNode\NodeProgradeDeltaV.cs" />
+    <Compile Include="Flight\Readouts\Orbital\ManoeuvreNode\PostBurnApoapsis.cs" />
+    <Compile Include="Flight\Readouts\Orbital\ManoeuvreNode\PostBurnPeriapsis.cs" />
     <Compile Include="Flight\Readouts\Orbital\MeanAnomalyAtEpoc.cs" />
     <Compile Include="Flight\Readouts\Orbital\MeanAnomaly.cs" />
     <Compile Include="Flight\Readouts\Orbital\EccentricAnomaly.cs" />
     <Compile Include="Flight\Readouts\Orbital\ArgumentOfPeriapsis.cs" />
     <Compile Include="Flight\Readouts\Orbital\CurrentSoi.cs" />
+    <Compile Include="Flight\Readouts\Orbital\SemiMajorAxis.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="Flight\Readouts\Orbital\SpeedAtApoapsis.cs" />
+    <Compile Include="Flight\Readouts\Orbital\SpeedAtPeriapsis.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="Flight\Readouts\Orbital\TimeToAtmosphere.cs" />
     <Compile Include="Flight\Readouts\Orbital\TrueAnomaly.cs" />
     <Compile Include="Flight\Readouts\Orbital\TimeToEquatorialAscendingNode.cs" />
     <Compile Include="Flight\Readouts\Orbital\TimeToEquatorialDescendingNode.cs" />
@@ -91,11 +101,14 @@
     <Compile Include="Flight\Readouts\Surface\HorizontalAcceleration.cs" />
     <Compile Include="Flight\Readouts\Surface\VerticalAcceleration.cs" />
     <Compile Include="Flight\Readouts\Surface\MachNumber.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CoolestSkinTemperature.cs" />
     <Compile Include="Flight\Readouts\Thermal\CriticalPart.cs" />
     <Compile Include="Flight\Readouts\Thermal\CoolestPart.cs" />
     <Compile Include="Flight\Readouts\Thermal\CoolestTemperature.cs" />
-    <Compile Include="Flight\Readouts\Thermal\CriticalPercentage.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CriticalThermalPercentage.cs" />
+    <Compile Include="Flight\Readouts\Thermal\CriticalSkinTemperature.cs" />
     <Compile Include="Flight\Readouts\Thermal\CriticalTemperature.cs" />
+    <Compile Include="Flight\Readouts\Thermal\HottestSkinTemperature.cs" />
     <Compile Include="Flight\Readouts\Thermal\InternalFlux.cs" />
     <Compile Include="Flight\Readouts\Thermal\RadiationFlux.cs" />
     <Compile Include="Flight\Readouts\Thermal\ConvectionFlux.cs" />
@@ -158,7 +171,6 @@
     <Compile Include="Flight\Readouts\Orbital\OrbitalPeriod.cs" />
     <Compile Include="Flight\Readouts\Orbital\OrbitalSpeed.cs" />
     <Compile Include="Flight\Readouts\Orbital\PeriapsisHeight.cs" />
-    <Compile Include="Flight\Readouts\Orbital\SemiMajorAxis.cs" />
     <Compile Include="Flight\Readouts\Orbital\SemiMinorAxis.cs" />
     <Compile Include="Flight\Readouts\Orbital\TimeToApoapsis.cs" />
     <Compile Include="Flight\Readouts\Orbital\TimeToPeriapsis.cs" />

--- a/KerbalEngineer/LogMsg.cs
+++ b/KerbalEngineer/LogMsg.cs
@@ -15,7 +15,8 @@
 
         public void Flush()
         {
-            MonoBehaviour.print(this.buf);
+            if (this.buf.Length > 0)
+                MonoBehaviour.print(this.buf);
             this.buf.Length = 0;
         }
     }

--- a/KerbalEngineer/Properties/AssemblyInfo.cs
+++ b/KerbalEngineer/Properties/AssemblyInfo.cs
@@ -32,5 +32,5 @@
 // You can specify all the values or you can default the Build and Revision Numbers 
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion(KerbalEngineer.EngineerGlobals.AssemblyVersion)]
+[assembly: AssemblyVersion(KerbalEngineer.EngineerGlobals.ASSEMBLY_VERSION)]
 

--- a/KerbalEngineer/VesselSimulator/Simulation.cs
+++ b/KerbalEngineer/VesselSimulator/Simulation.cs
@@ -30,6 +30,7 @@
 
 namespace KerbalEngineer.VesselSimulator
 {
+    using System.ComponentModel;
     using CompoundParts;
     using Extensions;
     using Helpers;
@@ -675,21 +676,28 @@
             for (int i = 0; i < this.allParts.Count; i++)
             {
                 PartSim part = this.allParts[i];
-                // If the part has a parent
-                if (part.parent != null)
-                {
-                    if (part.isNoPhysics)
-                    {
-                        if (part.parent.isNoPhysics && part.parent.parent != null)
-                        {
-                            part.baseMass = 0d;
-                            part.baseMassForCoM = 0d;
-                        }
-                        else
-                        {
-                            part.parent.baseMassForCoM += part.baseMassForCoM;
-                            part.baseMassForCoM = 0d;
-                        }
+
+                // Check if part should pass it's mass onto its parent.
+                if (part.isNoPhysics && part.parent != null)
+                {
+                    PartSim partParent = part.parent;
+
+                    // Loop through all parents until a physically significant parent is found.
+                    while (partParent != null)
+                    {
+                        // Check if parent is physically significant.
+                        if (partParent.isNoPhysics == false)
+                        {
+                            // Apply the mass to the parent and remove it from the originating part.
+                            partParent.baseMassForCoM += part.baseMassForCoM;
+                            part.baseMassForCoM = 0.0;
+
+                            // Break out of the recursive loop.
+                            break;
+                        }
+
+                        // Recursively loop through the parent parts.
+                        partParent = partParent.parent;
                     }
                 }
             }

 Binary files a/Output/KerbalEngineer/KerbalEngineer.dll and b/Output/KerbalEngineer/KerbalEngineer.dll differ
--- a/Output/KerbalEngineer/KerbalEngineer.version
+++ b/Output/KerbalEngineer/KerbalEngineer.version
@@ -5,13 +5,13 @@
 	{
 		"MAJOR":1,
 		"MINOR":0,
-		"PATCH":16,
-		"BUILD":6
+		"PATCH":17,
+		"BUILD":0
 	},
 	"KSP_VERSION":
 	{
 		"MAJOR":1,
 		"MINOR":0,
-		"PATCH":2
+		"PATCH":4
 	}
 }