Getting ready for KSP v0.25.0
[VesselSimulator.git] / Documents / CHANGES.txt
blob:a/Documents/CHANGES.txt -> blob:b/Documents/CHANGES.txt
1.0.10.0  
  1.0.9.2
  Updated for KSP v0.25.0
Changed: Prettyfied Latitude and Longitude readouts. Changed: Prettyfied Latitude and Longitude readouts.
  Changed: ModuleLandingGear now uses the physical significance flag.
   
1.0.9.1 1.0.9.1
Fixed: Part size bug caused by TweakScale's cost calculator. Fixed: Part size bug caused by TweakScale's cost calculator.
   
1.0.9.0 1.0.9.0
Added: Build Engineer now also implements the '\' backslash show/hide shortcut. Added: Build Engineer now also implements the '\' backslash show/hide shortcut.
Added: New readouts to the vessel category: Added: New readouts to the vessel category:
- Current Stage DeltaV - Current Stage DeltaV
- Surface Thrust to Weight Ratio - Surface Thrust to Weight Ratio
   
Added: New editor overlay system. Added: New editor overlay system.
- Sleeker design. - Sleeker design.
- Hover over part information options: - Hover over part information options:
- Name only - Name only
- Middle click to show - Middle click to show
- Always show - Always show
- Slide out overlay displays: - Slide out overlay displays:
- Vessel information - Vessel information
- Resources list - Resources list
   
Fixed: Cost calculation now works with mods implementing IPartCostModifier. Fixed: Cost calculation now works with mods implementing IPartCostModifier.
   
1.0.8.1 1.0.8.1
Fixed: Bug which caused rendezvous readouts to freeze the game or show all zeros. Fixed: Bug which caused rendezvous readouts to freeze the game or show all zeros.
   
1.0.8.0 1.0.8.0
Added: New readouts to the vessel category: Added: New readouts to the vessel category:
- Intake Air (Usage) - Intake Air (Usage)
   
Added: New readouts to the rendezvous category: Added: New readouts to the rendezvous category:
- Relative Velocity - Relative Velocity
- Relative Speed - Relative Speed
   
Fixed: An issue where deltaV would not be calculated whilst flying. Fixed: An issue where deltaV would not be calculated whilst flying.
Fixed: NullRef whilst loading the in flight Action Menu. Fixed: NullRef whilst loading the in flight Action Menu.
   
1.0.7.1 1.0.7.1
Changed: Reversed Intake Air readout from 'S/D' to 'D/S' for easier reading. Changed: Reversed Intake Air readout from 'S/D' to 'D/S' for easier reading.
Changed: Increased Intake Air readout precision to 4 decimal places. Changed: Increased Intake Air readout precision to 4 decimal places.
Fixed: Issue where Intake Air supply was not representative of total supply. Fixed: Issue where Intake Air supply was not representative of total supply.
Fixed: Bug where actual thrust does not reset to zero on deactivated engines. Fixed: Bug where actual thrust does not reset to zero on deactivated engines.
Fixed: Thrust now scales with velocity for atmospheric engines. (Padishar's fix) Fixed: Thrust now scales with velocity for atmospheric engines. (Padishar's fix)
   
1.0.7.0 1.0.7.0
Added: Part count information to the Build Engineer. Added: Part count information to the Build Engineer.
Added: Reset button to the G-Force readout. Added: Reset button to the G-Force readout.
Added: Preset system to the Flight Engineer. Added: Preset system to the Flight Engineer.
Added: New stock presets: Added: New stock presets:
- Orbital - Orbital
- Surface - Surface
- Vessel - Vessel
- Rendezvous - Rendezvous
   
Added: New readouts to the orbital category: Added: New readouts to the orbital category:
- True Anomaly - True Anomaly
- Eccentric Anomaly - Eccentric Anomaly
- Mean Anomaly - Mean Anomaly
- Argument of Periapsis - Argument of Periapsis
- Angle to Prograde - Angle to Prograde
- Angle to Retrograde - Angle to Retrograde
   
Added: New readouts to the vessel category: Added: New readouts to the vessel category:
- Intake Air (Demand) - Intake Air (Demand)
- Intake Air (Supply) - Intake Air (Supply)
- Intake Air (Supply/Demand) - Intake Air (Supply/Demand)
   
Added: New readouts to the rendezvous category. Added: New readouts to the rendezvous category.
- Semi-major Axis - Semi-major Axis
- Semi-minor Axis - Semi-minor Axis
   
Added: Time formatter which can show time as referenced by any celestial body. Added: Time formatter which can show time as referenced by any celestial body.
Added: New readouts to the miscellaneous category: Added: New readouts to the miscellaneous category:
- Time Reference Adjuster - Time Reference Adjuster
   
Changed: Moved Sim Delay readout into the Miscellaneous category. Changed: Moved Sim Delay readout into the Miscellaneous category.
Changed: Updated MiniAVC to v1.0.2.3. Changed: Updated MiniAVC to v1.0.2.3.
Fixed: Issues with large value wrap around in the Flight Engineer. Fixed: Issues with large value wrap around in the Flight Engineer.
Fixed: Bug in the phase angle calculation. Fixed: Bug in the phase angle calculation.
   
1.0.6.0 1.0.6.0
Added: Time and Angle to equatorial ascending/descending nodes in the orbital display. Added: Time and Angle to equatorial ascending/descending nodes in the orbital display.
Added: Time and Angle to relative ascending/descending nodes in the rendezvous display. Added: Time and Angle to relative ascending/descending nodes in the rendezvous display.
Added: Overlay tooltip information delay adjustment slider to the Build Engineer settings. Added: Overlay tooltip information delay adjustment slider to the Build Engineer settings.
Added: Ability to rename the stock displays in the Flight Engineer. Added: Ability to rename the stock displays in the Flight Engineer.
Changed: Build Engineer is now hidden when not in parts view. Changed: Build Engineer is now hidden when not in parts view.
Changed: Custom display panels will only show in the control bar if an abbreviation is set. Changed: Custom display panels will only show in the control bar if an abbreviation is set.
Changed: Licensing and readme structures are now more verbose to satisfy the new add-on rules. Changed: Licensing and readme structures are now more verbose to satisfy the new add-on rules.
Fixed: Updated MiniAVC to v1.0.2.1 (fixes remote check bug as well as other minor bugs). Fixed: Updated MiniAVC to v1.0.2.1 (fixes remote check bug as well as other minor bugs).
   
1.0.5.0 1.0.5.0
Added: Acceleration readout to the Vessel category (current / maximum). Added: Acceleration readout to the Vessel category (current / maximum).
Added: Category library system for the Flight Engineer readouts. Added: Category library system for the Flight Engineer readouts.
Added: Drop-down category selection to better support the new system. Added: Drop-down category selection to better support the new system.
Changed: Misc category now called Miscellaneous (this will cause previously added readouts from this category to vanish). Changed: Misc category now called Miscellaneous (this will cause previously added readouts from this category to vanish).
Fixed: Bug with the Build Engineer toolbar button. Fixed: Bug with the Build Engineer toolbar button.
Fixed: Some buggyness when trying to close the bodies drop-down in the Build Engineer via the button. Fixed: Some buggyness when trying to close the bodies drop-down in the Build Engineer via the button.
Fixed: Flight Engineer toolbar menu now hides when hiding the GUI with F2. Fixed: Flight Engineer toolbar menu now hides when hiding the GUI with F2.
Fixed: Flight Engineer toolbar button now disables when in module mode and no engineer is running. Fixed: Flight Engineer toolbar button now disables when in module mode and no engineer is running.
   
1.0.4.0 1.0.4.0
Added: Better stock toolbar support in the flight engineer. Added: Better stock toolbar support in the flight engineer.
Added: Dynamically generated celestial body library for supporting add-ons that modify the star system. Added: Dynamically generated celestial body library for supporting add-ons that modify the star system.
Changed: Reference bodies are now listed with a nestable menu system. Changed: Reference bodies are now listed with a nestable menu system.
Changed: Extended logging system has been improved. Changed: Extended logging system has been improved.
Changed: Swapped out integrated MiniAVC in place of the official bundle version. Changed: Swapped out integrated MiniAVC in place of the official bundle version.
Changed: Increased general distance precision to 1 decimal place. Changed: Increased general distance precision to 1 decimal place.
Changed: Increased Semi-major/minor axis precision to 3 decimal places. Changed: Increased Semi-major/minor axis precision to 3 decimal places.
Fixed: Impact altitude was mistakenly formatted as an angle, it is now formatted correctly as a distance. Fixed: Impact altitude was mistakenly formatted as an angle, it is now formatted correctly as a distance.
   
1.0.3.0 1.0.3.0
Added: Integrated KSP-AVC support with MiniAVC. Added: Integrated KSP-AVC support with MiniAVC.
Added: Setting to change the simulation delay in the Build Engineer. Added: Setting to change the simulation delay in the Build Engineer.
Added: Setting to enable and disable the build overlay system. Added: Setting to enable and disable the build overlay system.
Added: Burn time to Delta-V readouts. Added: Burn time to Delta-V readouts.
Added: Atmospheric readouts fully support FAR. Added: Atmospheric readouts fully support FAR.
Added: Atmospheric readouts are disabled with NEAR. Added: Atmospheric readouts are disabled with NEAR.
Changed: Force formatting inversely scales decimal precision with value. Changed: Force formatting inversely scales decimal precision with value.
Fixed: Flickering in VAB and Vessel display. Fixed: Flickering in VAB and Vessel display.
Fixed: Bug saving the GUI display size. Fixed: Bug saving the GUI display size.
   
1.0.2.0 1.0.2.0
Added: Separator readout module under Misc in the Flight Engineer. Added: Separator readout module under Misc in the Flight Engineer.
Added: Adjustable GUI display size. Added: Adjustable GUI display size.
Added: Display size can be adjusted in the Build Engineer settings. Added: Display size can be adjusted in the Build Engineer settings.
Added: Misc readout for adjusting display size in the Flight Engineer. Added: Misc readout for adjusting display size in the Flight Engineer.
Changed: The rendezvous readout for the target's Orbital Period has higher precision. Changed: The rendezvous readout for the target's Orbital Period has higher precision.
Fixed: White toolbar icon by manually importing the texture if it cannot be found in the game database. Fixed: White toolbar icon by manually importing the texture if it cannot be found in the game database.
Fixed: Engines that have a minimum thrust are now calculated properly. (Thanks to nosscire.) Fixed: Engines that have a minimum thrust are now calculated properly. (Thanks to nosscire.)
Fixed: Compact collapse mode is now saved in the Build Engineer. Fixed: Compact collapse mode is now saved in the Build Engineer.
   
1.0.1.0 1.0.1.0
Added: Part-less Flight Engineer. Added: Part-less Flight Engineer.
Added: Ability to collapse the Build Engineer into compact mode from left or right. Added: Ability to collapse the Build Engineer into compact mode from left or right.
Added: Settings in Build Engineer for compact collapse mode and partless/module Flight Engineer. Added: Settings in Build Engineer for compact collapse mode and partless/module Flight Engineer.
Added: Biome, Impact Biome and Slope readouts. Added: Biome, Impact Biome and Slope readouts.
Added: Extra logging and exception handling. Added: Extra logging and exception handling.
Added: The original Engineer Chip part. Added: The original Engineer Chip part.
Added: "Show Engineer" toggle on the Flight Engineer toolbar. Added: "Show Engineer" toggle on the Flight Engineer toolbar.
Changed: Extended logging system now also writes to the standard KSP logs. Changed: Extended logging system now also writes to the standard KSP logs.
Changed: Extended logging saves next to the .dll file. Changed: Extended logging saves next to the .dll file.
Changed: ER7500 part has no physical significance. Changed: ER7500 part has no physical significance.
Fixed: ActionMenu and DisplayStack destruction bug. Fixed: ActionMenu and DisplayStack destruction bug.
   
1.0.0.1 1.0.0.1
Added: Stock toolbar support in the Flight Engineer. Added: Stock toolbar support in the Flight Engineer.
Changed: Orbital Period has higher precision. Changed: Orbital Period has higher precision.
Fixed: Various NullRefs in editor window and overlay. Fixed: Various NullRefs in editor window and overlay.
1.0.0.0 1.0.0.0
Initial release for public testing. Initial release for public testing.