Pulled some more of padishar's fixes and prepped 1.0.15.2
[VesselSimulator.git] / Documents / CHANGES.txt
blob:a/Documents/CHANGES.txt -> blob:b/Documents/CHANGES.txt
--- a/Documents/CHANGES.txt
+++ b/Documents/CHANGES.txt
@@ -1,10 +1,86 @@
+1.0.18.0
+    Added: Orbital readouts - "Speed at Periapsis" and "Speed at Apoapsis". (Padishar)
+    Added: Manoeuvre readouts - "Post-burn Apoapsis" and "Post-burn Periapsis". (Padishar)
+    Fixed: Synched the minimum simulation time sliders and stopped them from snapping back after 999ms. (saybur)
+    Fixed: Added workaround for the bug in Vessel.horizontalSrfSpeed (Padishar)
+    Fixed: Physically insignificant part masses were not correctly being cascaded down through its parents.
+
+1.0.17.0
+    Added: 'Mach Number' readout under the 'Surface' category and included it on the default surface HUD.
+    Added: Stock sections in the Flight Engineer can now become HUDs.
+    Added 'Thermal' readouts category including:
+        Internal Flux
+        Convection Flux
+        Radiation Flux
+        Critical Part Name
+        Critical Part Temperature
+        Critical Part Skin Temperature
+        Critical Part Thermal Percentage of Max Temperature
+        Hottest Part Name
+        Hottest Part Temperature
+        Hottest Part Skin Temperature
+        Coldest Part Name
+        Coldest Part Temperature
+        Coldest Part Skin Temperature
+
+    Changed: Mach on the Build Engineer now accurate to 2 decimal places.
+    Changed: Max mach in the Build Engineer defaults to 1.00 even when no jet engines are present.
+    Changed: Increased eccentricity readout to 5 decimal places.
+    Changed: Implemented Sarbian's object pooling.
+    Changed: The default selected body is now assigned via 'Planitarium.Home'.
+    Changed: HUDs to clamp fully inside the screen instead of allowing them to run off the edge by a certain amount.
+    Fixed: Physically insignificant part mass is now associated with the parent part.
+    Fixed: Longitude and Latitude readouts now use a KER formatter instead of Squad's incorrect implementation.
+    Fixed: Possible null reference in the Rendezvous Processor.
+    Fixed: Fairing mass issues introduced with regards to simulation changes.
+    Fixed: Use of per-propellant fuel flow mode override.
+    Fixed: Burn times calculated for jet engines.
+    Fixed: Thrust issues introduced with Sarbian's simulation alterations.
+    Fixed: Issue where HUDs positioned close to the top/bottom of the screen could be pushed out of position.
+
+1.0.16.6, 02-05-15
+    Fixed: Separately staged fairing mass jettisons are now calculated in the editor.
+
+1.0.16.5, 02-05-2015
+    Fixed: Delta-V not being correctly calculated.
+    Changed: Editor locking now uses the InputLockManager.
+
+1.0.16.4, 01-05-2015
+    Fixed: Physically insignificant part mass is now accounted for.
+    Changed: Module mass accounted for as it now makes its way onto the launch pad (e.g. fairings).
+
+    Various optimisations:
+        Object pooling.
+        Removed LINQ expressions.
+        Converted foreach to for loops.
+
+1.0.16.3, 27-04-2015
+    Fixed issue with the toolbar icons not being created.
+    Removed superfluous 'm/s' on the mach slider in the build engineer.
+
+1.0.16.2, 27-04-2015
+    Changed the atmospheric slider on the build engineer to default to 0km when changing bodies.
+
+1.0.16.1, 26-04-2015, KSP Build #828
+    Merged Sarbian's mach adjustments.
+    Fixed bugs relating to thrust and atmosphere/velocity curves.
+    Changed the atmospheric slider on the Build Engineer to work based on altitude.
+    Changed the atmospheric slider to clamp to the maximum altitude for the selected body.
+    Changed the velocity slider to clamp to the maximum usable mach value for the current vessel.
+
+1.0.16.0, 25-04-2015, KSP Build #821
+    Fixed errors relating to KSP 1.0 update.
+    Fixed fuel simulation to account for new thrust system.
+    Fixed atmospheric engines to use the new velocity curve.
+    Fixed atmospheric readouts to work with the new atmospheric model.
+
 1.0.15.2, 13-02-2015
     Padishar's Fixes:
         Fixed: Calculation of per-stage resource mass.
 
 1.0.15.1, 13-02-2015
     Rebuild
-    
+
 1.0.15.0, 08-02-2015
     Padishar's Fixes:
         Added: Support KIDS ISP thrust correction.
@@ -14,7 +90,7 @@
 
 1.0.14.1, 28-12-2014
     Fixed: Missing texture on the ER-7500 model.
-    
+
 1.0.14.0, 28-12-2014
     Added: Career mode that limits the Flight Engineer by:
         - Requiring an Engineer Kerbal of any level, or placement of an Engineer Chip or ER-7500 part.
@@ -134,7 +210,7 @@
     Added: New readout to the surface category:
         - Vertical Acceleration
         - Horizontal Acceleration
-    
+
     Changed: Atmospheric efficiency readout now shows as a percentage.
     Changed: Atmospheric settings (pressure/velocity) in the editor condensed onto a single line.
     Fixed: Bug where the overlays in the editor would stay open outside of parts screen.
@@ -291,6 +367,7 @@
     Added: Stock toolbar support in the Flight Engineer.
     Changed: Orbital Period has higher precision.
     Fixed: Various NullRefs in editor window and overlay.
-    
+
 1.0.0.0, 24-07-2014
     Initial release for public testing.
+