Fixed issue where HUDs with few or no readouts would get pushed away from the top/bottom edges of the screen. HUDs now clamp fully inside the screen instead allowing overflow with a margin like normal windows.
[VesselSimulator.git] / Documents / CHANGES.txt
cybutek 1 1.0.17.0
cybutek 2 Added: 'Mach Number' readout under the 'Surface' category and included it on the default surface HUD.
3 Added 'Thermal' readouts category including:
4 Internal Flux
5 Convection Flux
6 Radiation Flux
7 Critical Part Name
8 Critical Part Temperature
9 Critical Part Percentage of Max Temperature
10 Hottest Part Name
11 Hottest Part Temperature
12 Coldest Part Name
13 Coldest Part Temperature
14
cybutek 15 Changed: Mach on the Build Engineer now accurate to 2 decimal places.
16 Changed: Max mach in the Build Engineer defaults to 1.00 even when no jet engines are present.
17 Changed: Increased eccentricity readout to 5 decimal places.
18 Changed: Implemented Sarbian's object pooling.
cybutek 19 Changed: How the default selected body is assigned to 'Planitarium.Home'.
20 Changed: HUDs to clamp fully inside the screen instead of allowing them to run off the edge by a certain amount.
cybutek 21 Fixed: Physically insignificant part mass is now associated with the parent part.
22 Fixed: Longitude and Latitude readouts now use a KER formatter instead of Squad's incorrect implementation.
23 Fixed: Possible null reference in the Rendezvous Processor.
cybutek 24 Fixed: Fairing mass issues introduced with regards to simulation changes.
25 Fixed: Use of per-propellant fuel flow mode override.
26 Fixed: Burn times calculated for jet engines.
27 Fixed: Thrust issues introduced with Sarbian's simulation alterations.
28 Fixed: Issue where HUDs positioned close to the top/bottom of the screen could be pushed out of position.
cybutek 29
cybutek 30 1.0.16.6, 02-05-15
31 Fixed: Separately staged fairing mass jettisons are now calculated in the editor.
32
cybutek 33 1.0.16.5, 02-05-2015
34 Fixed: Delta-V not being correctly calculated.
35 Changed: Editor locking now uses the InputLockManager.
36
cybutek 37 1.0.16.4, 01-05-2015
38 Fixed: Physically insignificant part mass is now accounted for.
39 Changed: Module mass accounted for as it now makes its way onto the launch pad (e.g. fairings).
40
41 Various optimisations:
42 Object pooling.
43 Removed LINQ expressions.
44 Converted foreach to for loops.
45
cybutek 46 1.0.16.3, 27-04-2015
47 Fixed issue with the toolbar icons not being created.
48 Removed superfluous 'm/s' on the mach slider in the build engineer.
49
cybutek 50 1.0.16.2, 27-04-2015
51 Changed the atmospheric slider on the build engineer to default to 0km when changing bodies.
52
cybutek 53 1.0.16.1, 26-04-2015, KSP Build #828
54 Merged Sarbian's mach adjustments.
55 Fixed bugs relating to thrust and atmosphere/velocity curves.
56 Changed the atmospheric slider on the Build Engineer to work based on altitude.
57 Changed the atmospheric slider to clamp to the maximum altitude for the selected body.
58 Changed the velocity slider to clamp to the maximum usable mach value for the current vessel.
59
60 1.0.16.0, 25-04-2015, KSP Build #821
61 Fixed errors relating to KSP 1.0 update.
62 Fixed fuel simulation to account for new thrust system.
63 Fixed atmospheric engines to use the new velocity curve.
64 Fixed atmospheric readouts to work with the new atmospheric model.
65
cybutek 66 1.0.15.2, 13-02-2015
67 Padishar's Fixes:
68 Fixed: Calculation of per-stage resource mass.
69
cybutek 70 1.0.15.1, 13-02-2015
71 Rebuild
72
73 1.0.15.0, 08-02-2015
74 Padishar's Fixes:
75 Added: Support KIDS ISP thrust correction.
76 Fixed: Log spam for stage priority mode.
77 Fixed: Locked tanks preventing simulation from staging.
78 Fixed: No flow and all vessel modes to respect flow states.
79
cybutek 80 1.0.14.1, 28-12-2014
81 Fixed: Missing texture on the ER-7500 model.
82
cybutek 83 1.0.14.0, 28-12-2014
cybutek 84 Added: Career mode that limits the Flight Engineer by:
85 - Requiring an Engineer Kerbal of any level, or placement of an Engineer Chip or ER-7500 part.
86 - Tracking station level 3 enables Flight Engineer everywhere.
87
cybutek 88 Added: New readouts to the orbital category:
89 - Mean Anomaly at Epoc
90
cybutek 91 Added: New readouts to the miscellaneous category:
cybutek 92 - System Time
cybutek 93
cybutek 94 Added: Editor Overlay Tab's X position is now changable in the BuildOverlay.xml settings file.
cybutek 95 Changed: Editor Overlay Tabs start position moved over as to not overlap the parts menu.
cybutek 96 Fixed: Bug where STAGE_PRIORITY_FLOW resources would not be corrently disabled/enabled.
cybutek 97 Fixed: Issue with the formatting large Mass and Cost values.
cybutek 98 Fixed: Error when loading the Engineer7500 part model.
cybutek 99
100 1.0.13.1, 16-12-2014
101 Fixed: Issue with manoeuvre node readouts and low tier tracking station.
102
103 1.0.13.0, 16-12-2014
104 Updated for KSP version 0.90
cybutek 105
cybutek 106 Added: New readouts to the vessel category:
107 - Heading Rate
108 - Pitch Rate
109 - Roll Rate
110
cybutek 111 Changed: Simulation to look for fuel lines that use CModuleFuelLine module.
cybutek 112 Fixed: Editor Overlay now loads the saved visibility value properly.
cybutek 113 Fixed: Altitude (Terrain) will no longer give a reading below sea level.
cybutek 114 Fixed: Suicide burn now uses radar altitude that clamps to sea level.
cybutek 115
cybutek 116 1.0.12.0, 01-12-2014
cybutek 117 Added: Setting in Build Engineer to enable/disable vectored thrust calculations.
118 Added: Thrust torque field in Build Engineer (courtesy of mic_e).
119 Added: New readouts to the vessel category:
120 - Thrust Offset Angle (courtesy of mic_e)
121 - Thrust Torque (courtesy of mic_e)
122 - Part Count: stage/total
123 - Heading
124 - Pitch
125 - Roll
126
127 Added: New readouts to the surface category:
128 - Situation
129
130 Added: New readouts to the miscellaneous category:
131 - Vectored Thrust Toggle
132
133 Fixed: The category selection within the section editors now do not always reset back to 'Orbital'.
134 Fixed: Issue where the vessel simulation can sometimes permanently freeze.
135 Fixed: Issue where the vessel simulation would not show updates when the delay was set lower than the frame rate.
cybutek 136
CYBUTEK 137 1.0.11.3, 11-11-2014
138 Changed: Gravity measurements for Isp to 9.82.
139
CYBUTEK 140 1.0.11.2, 10-11-2014
141 Changed: Gravity measurements for Isp calculations from 9.81 to 9.8066 for accuracy.
142 Changed: Manoeuvre node burn times are now more accurate.
143 Fixed: Bug in the manoeuvre node burn time calculations where it was not averaging acceleration correctly.
144
CYBUTEK 145 1.0.11.1, 07-11-2014
CYBUTEK 146 Changed: Build Engineer now shows stage part count as well as total.
147 Changed: Build Overlay Vessel tab data:
148 DeltaV: stage / total
149 Mass: stage / total
150 TWR: start (max) <- shows for bottom stage only.
151 Parts: stage / total
152
CYBUTEK 153 Fixed: Issue with the vessel tab vanishing from the editor.
154
155 1.0.11.0, 06-11-2014
CYBUTEK 156 Added: New readouts to the orbital category:
157 - Current SOI
CYBUTEK 158 - Manoeuvre Node DeltaV (Prograde)
159 - Manoeuvre Node DeltaV (Normal)
160 - Manoeuvre Node DeltaV (Radial)
161 - Manoeuvre Node DeltaV (Total)
162 - Manoeuvre Node Burn Time
163 - Manoeuvre Node Half Burn Time
164 - Manoeuvre Node Angle to Prograde
165 - Manoeuvre Node Angle to Retrograde
166 - Time to Manoeuvre Node
167 - Time to Manoeuvre Burn
168
169 Added: Readout help strings by ClassyJakey.
CYBUTEK 170
CYBUTEK 171 Fixed: Issue with separators in HUDs.
CYBUTEK 172 Fixed: Issue with HUDs with backgrounds that have no displayed lines.
CYBUTEK 173
CYBUTEK 174 Padishar's Fixes:
175 Fixed: Issue with multicouplers when attached to parent by bottom node.
176 Fixed: Issue with sepratrons on solid rocket boosters.
177
CYBUTEK 178 1.0.10.0, 19-10-2014
CYBUTEK 179 UPDATE NOTICE: If you are updating from a previous version of Kerbal Engineer 1.0, please
CYBUTEK 180 delete the 'Settings/SectionLibrary.xml' file, or remove the old install first. This will
CYBUTEK 181 reset the Flight Engineer sections to their default values and enable the new HUD functionality.
182
CYBUTEK 183 Added: New reaouts to the vessel category:
184 - Suicide Burn Altitude (height above terrain to start burn)
185 - Suicide Burn Distance (distance to suicide burn altitude)
186 - Suicide Burn DeltaV (velocity change required to zero vertical speed)
CYBUTEK 187 *** F5 for safety and use at your own risk! ***
CYBUTEK 188
CYBUTEK 189 Added: HUD type sections to the Flight Engineer.
CYBUTEK 190 Added: HUD sections can have a smoked background for easy visibility.
CYBUTEK 191 Added: 'Switch to Target' button on the Target Selector readout.
192 Changed: The default installed readouts to reduce new user brain melt.
CYBUTEK 193 Fixed: Flight Engineer not saving its hidden state.
194 Fixed: Bug in the phase angle calculations.
CYBUTEK 195 Fixed: Bug where the Build Engineer would stay locked after hiding with the shortcut key.
CYBUTEK 196
CYBUTEK 197 1.0.9.3, 08-10-2014
CYBUTEK 198 Added: Title of the build engineer in compact mode now shows if you are using atmospheric data.
CYBUTEK 199 Added: New readout to the surface category:
200 - Vertical Acceleration
201 - Horizontal Acceleration
CYBUTEK 202
203 Changed: Atmospheric efficiency readout now shows as a percentage.
CYBUTEK 204 Changed: Atmospheric settings (pressure/velocity) in the editor condensed onto a single line.
CYBUTEK 205 Fixed: Bug where the overlays in the editor would stay open outside of parts screen.
CYBUTEK 206
CYBUTEK 207 1.0.9.2, 07-10-2014
CYBUTEK 208 Updated for KSP v0.25.0
209 Changed: Prettyfied Latitude and Longitude readouts.
210 Changed: ModuleLandingGear now uses the physical significance flag.
211 Changed: Updated MiniAVC to 1.0.2.4.
CYBUTEK 212
CYBUTEK 213 1.0.9.1, 17-09-2014
CYBUTEK 214 Fixed: Part size bug caused by TweakScale's cost calculator.
CYBUTEK 215
CYBUTEK 216 1.0.9.0, 15-09-2014
CYBUTEK 217 Added: Build Engineer now also implements the '\' backslash show/hide shortcut.
218 Added: New readouts to the vessel category:
219 - Current Stage DeltaV
220 - Surface Thrust to Weight Ratio
221
222 Added: New editor overlay system.
223 - Sleeker design.
224 - Hover over part information options:
225 - Name only
226 - Middle click to show
227 - Always show
228 - Slide out overlay displays:
229 - Vessel information
230 - Resources list
231
232 Fixed: Cost calculation now works with mods implementing IPartCostModifier.
CYBUTEK 233
CYBUTEK 234 1.0.8.1, 06-09-2014
CYBUTEK 235 Fixed: Bug which caused rendezvous readouts to freeze the game or show all zeros.
CYBUTEK 236
CYBUTEK 237 1.0.8.0, 06-09-2014
CYBUTEK 238 Added: New readouts to the vessel category:
239 - Intake Air (Usage)
240
241 Added: New readouts to the rendezvous category:
242 - Relative Velocity
243 - Relative Speed
244
CYBUTEK 245 Fixed: An issue where deltaV would not be calculated whilst flying.
CYBUTEK 246 Fixed: NullRef whilst loading the in flight Action Menu.
CYBUTEK 247
CYBUTEK 248 1.0.7.1, 02-09-2014
CYBUTEK 249 Changed: Reversed Intake Air readout from 'S/D' to 'D/S' for easier reading.
CYBUTEK 250 Changed: Increased Intake Air readout precision to 4 decimal places.
CYBUTEK 251 Fixed: Issue where Intake Air supply was not representative of total supply.
CYBUTEK 252 Fixed: Bug where actual thrust does not reset to zero on deactivated engines.
CYBUTEK 253 Fixed: Thrust now scales with velocity for atmospheric engines. (Padishar's fix)
254
CYBUTEK 255 1.0.7.0, 01-09-2014
CYBUTEK 256 Added: Part count information to the Build Engineer.
CYBUTEK 257 Added: Reset button to the G-Force readout.
258 Added: Preset system to the Flight Engineer.
259 Added: New stock presets:
260 - Orbital
261 - Surface
262 - Vessel
263 - Rendezvous
264
CYBUTEK 265 Added: New readouts to the orbital category:
CYBUTEK 266 - True Anomaly
267 - Eccentric Anomaly
268 - Mean Anomaly
269 - Argument of Periapsis
270 - Angle to Prograde
271 - Angle to Retrograde
CYBUTEK 272
273 Added: New readouts to the vessel category:
CYBUTEK 274 - Intake Air (Demand)
275 - Intake Air (Supply)
276 - Intake Air (Supply/Demand)
CYBUTEK 277
CYBUTEK 278 Added: New readouts to the rendezvous category.
279 - Semi-major Axis
280 - Semi-minor Axis
CYBUTEK 281
CYBUTEK 282 Added: Time formatter which can show time as referenced by any celestial body.
CYBUTEK 283 Added: New readouts to the miscellaneous category:
CYBUTEK 284 - Time Reference Adjuster
CYBUTEK 285
286 Changed: Moved Sim Delay readout into the Miscellaneous category.
CYBUTEK 287 Changed: Updated MiniAVC to v1.0.2.3.
CYBUTEK 288 Fixed: Issues with large value wrap around in the Flight Engineer.
289 Fixed: Bug in the phase angle calculation.
CYBUTEK 290
CYBUTEK 291 1.0.6.0, 23-08-2014
CYBUTEK 292 Added: Time and Angle to equatorial ascending/descending nodes in the orbital display.
293 Added: Time and Angle to relative ascending/descending nodes in the rendezvous display.
CYBUTEK 294 Added: Overlay tooltip information delay adjustment slider to the Build Engineer settings.
CYBUTEK 295 Added: Ability to rename the stock displays in the Flight Engineer.
CYBUTEK 296 Changed: Build Engineer is now hidden when not in parts view.
CYBUTEK 297 Changed: Custom display panels will only show in the control bar if an abbreviation is set.
298 Changed: Licensing and readme structures are now more verbose to satisfy the new add-on rules.
CYBUTEK 299 Fixed: Updated MiniAVC to v1.0.2.1 (fixes remote check bug as well as other minor bugs).
CYBUTEK 300
CYBUTEK 301 1.0.5.0, 13-08-2014
CYBUTEK 302 Added: Acceleration readout to the Vessel category (current / maximum).
303 Added: Category library system for the Flight Engineer readouts.
304 Added: Drop-down category selection to better support the new system.
305 Changed: Misc category now called Miscellaneous (this will cause previously added readouts from this category to vanish).
306 Fixed: Bug with the Build Engineer toolbar button.
307 Fixed: Some buggyness when trying to close the bodies drop-down in the Build Engineer via the button.
308 Fixed: Flight Engineer toolbar menu now hides when hiding the GUI with F2.
309 Fixed: Flight Engineer toolbar button now disables when in module mode and no engineer is running.
310
CYBUTEK 311 1.0.4.0, 12-08-2014
CYBUTEK 312 Added: Better stock toolbar support in the flight engineer.
313 Added: Dynamically generated celestial body library for supporting add-ons that modify the star system.
314 Changed: Reference bodies are now listed with a nestable menu system.
315 Changed: Extended logging system has been improved.
316 Changed: Swapped out integrated MiniAVC in place of the official bundle version.
317 Changed: Increased general distance precision to 1 decimal place.
318 Changed: Increased Semi-major/minor axis precision to 3 decimal places.
319 Fixed: Impact altitude was mistakenly formatted as an angle, it is now formatted correctly as a distance.
320
CYBUTEK 321 1.0.3.0, 30-07-2014
CYBUTEK 322 Added: Integrated KSP-AVC support with MiniAVC.
323 Added: Setting to change the simulation delay in the Build Engineer.
324 Added: Setting to enable and disable the build overlay system.
325 Added: Burn time to Delta-V readouts.
326 Added: Atmospheric readouts fully support FAR.
327 Added: Atmospheric readouts are disabled with NEAR.
328 Changed: Force formatting inversely scales decimal precision with value.
329 Fixed: Flickering in VAB and Vessel display.
330 Fixed: Bug saving the GUI display size.
331
CYBUTEK 332 1.0.2.0, 27-07-2014
CYBUTEK 333 Added: Separator readout module under Misc in the Flight Engineer.
334 Added: Adjustable GUI display size.
335 Added: Display size can be adjusted in the Build Engineer settings.
336 Added: Misc readout for adjusting display size in the Flight Engineer.
337 Changed: The rendezvous readout for the target's Orbital Period has higher precision.
338 Fixed: White toolbar icon by manually importing the texture if it cannot be found in the game database.
339 Fixed: Engines that have a minimum thrust are now calculated properly. (Thanks to nosscire.)
340 Fixed: Compact collapse mode is now saved in the Build Engineer.
341
CYBUTEK 342 1.0.1.0, 26-07-2014
CYBUTEK 343 Added: Part-less Flight Engineer.
344 Added: Ability to collapse the Build Engineer into compact mode from left or right.
345 Added: Settings in Build Engineer for compact collapse mode and partless/module Flight Engineer.
346 Added: Biome, Impact Biome and Slope readouts.
347 Added: Extra logging and exception handling.
348 Added: The original Engineer Chip part.
349 Added: "Show Engineer" toggle on the Flight Engineer toolbar.
350 Changed: Extended logging system now also writes to the standard KSP logs.
351 Changed: Extended logging saves next to the .dll file.
352 Changed: ER7500 part has no physical significance.
353 Fixed: ActionMenu and DisplayStack destruction bug.
354
CYBUTEK 355 1.0.0.1, 24-07-2014
CYBUTEK 356 Added: Stock toolbar support in the Flight Engineer.
357 Changed: Orbital Period has higher precision.
358 Fixed: Various NullRefs in editor window and overlay.
359
CYBUTEK 360 1.0.0.0, 24-07-2014
CYBUTEK 361 Initial release for public testing.